Lucent Technologies Definity Audix System Release 4.0 Screens Reference Manual

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-179 display Switch-Link (DS Mode) 
3
display Switch-Link (DS Mode)
The system installer uses the Switch Link Embedded sc reen to d efine the 
integ ration method  b etween the switc h and  the DEFINITY AUDIX System. This 
sc reen is ac tive when the DEFINITY AUDIX System is running  in the Disp lay Set 
(DS) switc h integ ration mod e (DS uses an eig ht p ort b oard ), as spec ified  on the...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-180 display Switch-Link (DS Mode) 
3
Field Descriptions 
Name Description Valid Entries Default
Host Switch Switc h numb er assig ned  to the host 
switc h1
NOTE:
The host switch numb er should not b e c hang ed  after installation. If 
the host switch number is chang ed after installation, the switc h 
numb er on the Sub sc rib er sc reen must b e c hang ed  to matc h this 
numb er for all sub scrib...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-181 display Switch-Link (DS Mode) 
3
busyout Switch-Link 
The Busyout/Release Switc h Link sc reen is used  to b usyout or release the switc h 
link and  to d isp lay the results of the b usyout or release op eration. 
busyout switch-link 
release switch-link 
Field Descriptions 
Name Description (display only)
Resourc e Name of the ob jec t being b usied -out or released . For this sc reen, the...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-182 display Switch-Link (DS Mode) 
3
status Switch-Link
The Status Switc h Link sc reen is used  to d isp lay the status of the switc h link. 
status switch link 
NOTE:
This sc reen c an b e ac tivated  while the DEFINITY AUDIX System is in the 
OA&M state. 
Field Descriptions 
Name Description (display only)
Typ e Typ e of switc h link c urrently ad ministered
Baud Transmission rate for the switc h...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-183 display Switch-Link (DS Mode) 
3
Reason Possib le out of servic e reasons:
C (manually b usied  out, b y c raft)
T (test in p rog ress)
F (a fault on the switc h link. All lines are d own.)
FSW word s - level 
13Failure status word for levels 13 of the switc h link
FSW Level       Bits Used
FSW 1               Bits 0-2 g ive the level 1 state:
                            0 - Carrier Detec t...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-184 display Switch-Link (DS Mode) 
3
test Switch-Link Long (CL Mode)
Th e  Sw it c h - L i n k Test Results sc reen initiates a d emand  test of the 
AUDIX-to-switc h d ata link and  d isp lays the result of the test. 
test switch-link long
 
If long
 is sp ec ified , a test of the c omp lete p ath to the switc h is p erformed . 
test switch-link looparound
 
If looparound
 is sp ec ified , a test to...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-185 display Switch-Link (DS Mode) 
3
Sample Tasks
To p erform a c omp lete test of the AUDIX-to-switc h d ata link: 
1. Type test switch link long
 and  p ress   (Enter). 
2. Press   (Enter) to start the test, or   (Canc el) to return to the c ommand  
line without exec uting  the test. 
While the test is running , you have three op tions: 
1. Press   (Canc el) to ab ort the test and  return to the c...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-186 audit Switch-Names (DS Mode) 
3
audit Switch-Names (DS Mode)
When the DEFINITY AUDIX System is running  in DS mod e, the Aud it Results 
sc reen initiates a d emand  aud it on eac h sub sc rib er’s name and  d isp lays the 
aud it results. This aud it c reates a d irec tory of extensions and the name 
assoc iated  with eac h extension on the switc h. 
audit switch-names
 
NOTE:
This screen is not...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-187 display Switch-Time-Zone 
3
display Switch-Time-Zone
The Switc h Time Zone sc reen is used  to assign a time zone for the host switc h. 
display switch-time-zone 
change switch-time-zone  

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-188 display Switch-Time-Zone 
3
Field Descriptions
NOTE:
When you c hang e the switc h time zone, you must reb oot for the c hang e to 
take effec t. After reb ooting  verify that the switc h and  DEFINITY AUDIX times 
are sync hronized . If they are not, resync hronize the times b y ac c essing  the 
SET TIME
 sc reen and  selec ting  the synchronize to switch
 field .
Name Description Valid Entries...