Lucent Technologies Definity Audix System Release 4.0 Screens Reference Manual

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-139 test MO-Disk 
3
Field Descriptions 
Sample Tasks
To initiate a d emand  tap e test: 
1. Type test mo-disk 
and  p ress   (Enter). 
2. Press   (Canc el) to return to the c ommand  line without exec uting  the 
test.
While the test is running , you have three op tions: 
1. Press   (Canc el) to ab ort the test and  return to the c ommand  line. 
2. Wait for the test to c omp lete. 
3. Press...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-140 test MO-Disk 
3
status Test
The status Test sc reen rec onnec ts with a running  test, or with the results of the 
most rec ently run test. 
status test
 
This c ommand  rec onnec ts with the sc reen of the test running  in the b ac kg round , 
or if none, the most rec ently run test. If none, the c ommand  c auses an error to be 
d isp layed  (this should  oc c ur only when the status test
 c...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-141 audit Names 
3
3audit Names
The Aud it Results sc reen initiates a d emand  aud it on sub sc rib er names and  
d isp lays the results of the aud it.
audit names
Field Descriptions
Sample Tasks/Additional Specifications
Sa m e  a s  audit Mailboxes
. 
Name Description (display only)
Date Date that the audit was requested .
Time Time that the aud it was req uested .
Aud it Name Name of the aud it...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-142 audit Network Data 
3
audit Network Data
The Aud it Results sc reen initiates a d emand  aud it on network d ata and  displays 
the results of the aud it.
audit network-data
Field Descriptions
Name Description (display only)
Date Date that the audit was requested .
Time Time that the aud it was req uested .
Aud it Name Name of the aud it b eing  run.
Clean Cac he Writes d ata to d isk.
Result 1 c...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-143 change/display Network-Group 
3
change/display Network-Group
The Network Group  sc reen is used  to c hang e or d isp lay g roup s assoc iated  with 
the loc al network. The Chang e c ommand  enab les the user to ad minister the 
network ports and  loc ations. The Disp lay c ommand allows the user to d isp lay the 
groups. 
change network group 

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-144 change/display Network-Group 
3
display network group
Field Descriptions
Name Description  Valid Entries
Memb er The memb er numb er of the 
network g roup1 or 2
Port The network p ort loc ation 
assig ned  to this network g roup  
memb erPort in the form - p ort-network 
c arrier b oard  slot, 
e.g ., 1A0401
Extension The extension attac hed  to the 
portA switch extension number 
with leng th...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-145 busyout Network-Port 
3
busyout Network-Port 
The Busyout/Release Network Port sc reen enables the system ad ministrator to 
b usy out or release a network port and  to display the results of the busyout or 
release op eration.The busyout network port 
port- address c ommand  takes the 
port specified by port-address out of service.
busyout network port 
port- address 
Returns the port specified...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-146 busyout Network-Port 
3
Field Descriptions
Sample Tasks
To b usy-out a network p ort:
1. Type busyout network port
 
port-address [forced
]   and press
 (Enter).
Th e  
port-address and  the op tional keyword , forced
, are described above 
in the 
Command s section.
2. Press   (Canc el) to ab ort the op eration and  exit the sc reen.
3. Press   (Enter) to invoke the b usy-out operation.
To...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-147 test Network-Port 
3
test Network-Port
The Test Networking  Port Results sc reen enab les the user to test the network p ort 
connec tion. This screen tests the networking port spec ified by < loc> . There is a 
short test and  a long  test that resets the p ort, a test that starts the 64k-loop  test, a 
test that starts the 56k-loop  test, and  a test that stop s the ong oing  test. The loop...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-148 test Network-Port 
3
Field Description (display only)
Func tion Keys:
Initially, p ressing 
 (Canc el) returns the user to the c ommand  line without 
exec uting the test. Pressing  
(Enter) starts the test. While the test is running , 
p ressing   
(Canc el) ab orts the test and  pressing   
(Enter) p uts the test in the 
b ac kg round  and  returns the user to the c ommand  line. The “ status...