LG 32LD420 LCD TV User Manual

							41
EXTERNAL  EQUIPMENT  SETUP
VCR SETUP
Antenna Connection
DC-IN
RGB IN (PC)
AUDIO INRGB/DVI
(DVI)OPTICAL 
DIGITALAUDIO OUT
/DVI IN
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
12
VIDEOAUDIOL(\fONO)R
VIDEOAUDIOY PBPRLRANTENNA/
CABLE INLRS-VIDEO VIDEO
AUDIO
OUTPUTSWITC\f
ANT IN
ANT OUT
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/DVI
(DVI)OPTICAL 
DIGITALAUDIO OUT
/DVI IN
CO\bPONENT IN
RS-232C IN(CONTROL&SERVICE)
12
VIDEO AUDIOY PBPRLR
AV INVIDEOAUDIOL(\bONO)R
S-VIDEO
OUTPUT
SWITC\f
ANT IN
ANT OUT
LRVIDEO AUDIO
Wall Jack
Antenna
1. How to connect
1Conne\bt	the	RF 	ant enna 	out 	s o\bket 	
of	the	VCR 	t o 	the 	ANTENNA/CABLE 
IN
	so\bket 	on 	the 	 TV.
\bConne\bt	the	ant enna 	\b able 	t o 	the 	RF 	
antenna	in	s o\bket 	o f 	the 	V CR.
2. How to use
ꔛ	Set	VCR	output 	s wit\bh 	t o 	3 	or 	4 	and 	
then	tune	T V 	t o 	the 	s ame 	\bhannel 	num-
ber.
ꔛ	Insert	a	video	t ape	i nto	t he	V CR	a nd 	
press	PLAY	on	t he	V CR	( Refer	t o	t he 	
VCR	owner’s	manual).
1
2
Composite (RCA) Connection
DC-IN
RGB IN (PC)
AUDIO IN
RGB/DVI
(DVI)OPTICAL 
DIGITALAUDIO OUT
/DVI IN
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
12
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLRANTENNA/
CABLE INLRS-VIDEO VIDEO
AUDIO
OUTPUTSWITC\f
ANT IN
ANT OUT
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/DVI
(DVI)
OPTICAL  DIGITALAUDIO OUT
/DVI IN
CO\bPONENT IN
RS-232C IN(CONTROL&SERVICE)
12
VIDEO AUDIOY PBPRLR
AV INVIDEOAUDIOL(\bONO)R
S-VIDEO
OUTPUT
SWITC\f
ANT IN
ANT OUT
LRVIDEO AUDIO
1. How to connect
1Conne\bt	the	A\b\fIO/VI\fEO	ja\bks between	TV	
and	VCR.	Ma t\bh 	the 	ja\bk 	\b olors 	( Video 	= 	y ellow\f 	
Audio	Left	= 	whit e\f 	and 	A udio 	Right 	= 	r ed)
2. How to use
ꔛ		Insert	a	video 	tape 	int o 	the 	V CR 	and 	pr ess 	PLA Y 	
on	the	VCR. 	(Refer	to	the 	V CR 	o wner’s 	manual.)	
ꔛ	Sele\bt	the	AV or	AV1/2*	input	sour\be 	on 	the 	T V 	
using	the	INP\bT	button	on 	the 	r emote 	\b ontrol. 		
!
?
!
?
NOTE
►	If	you	have 	a 	mono 	V CR\f 	\b onne\bt 	the 	audio 	\b able 	
from	the	VCR 	t o 	the 	A\b\fIO L(MONO)	ja\bk	of 	the 	 TV.
1
*	AV2:	Ex\bept 	19 /22/26LE5300\f 	22/2 6LE5500   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
42
OTHER A/V SOURCE SETUP
ANTENNA/CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
COMPONENT IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEO AUDIOY PBPRLR
A\f IN\fIDEOAUDIOL(MONO)R
LR\fIDEO
Camcorder
Video Game Set
1. How to connect
1Conne\bt	t
he	A\b\fIO/VI\fEO	ja\bks 
between	TV 	and 	ext ernal 	equipment . 	
Mat\bh	the	ja\bk 	\b olors.
(
Video	=	yellow\f	A udio	L eft	=	w hite\f	a nd 	
Audio	Right	=	red)
2. How to use
ꔛ	Sele\bt	the	AV or	AV1/2* input	sour\be 	on 	
the	TV	using 	the 	INP\bT	button	on 	the 	
remote	\bontrol.
ꔛ	Operate	the	\b orresponding	e xternal 	
equipment.
1
*	AV2:	Ex\bept 	19 /22/26LE5300\f 	22/2 6LE5500 
						

							43
EXTERNAL  EQUIPMENT  SETUP
USB CONNECTION
USB IN
IN 3
H/P
Memory Key
or
1. How to connect
1	Conne\bt	the 	USB 	de vi\be 	t o 	the 	\bSB 
IN 
ja\bk	on 	the 	side 	o f 	 TV. 	
2. How to use
ꔛ	After	\bonne\bting	the 	\bSB IN ja\bk\f	you 	
use	the	USB 	f un\btion. 	(►p.78)
HEADPHONE SETUP (Except 37/42/47L\f450C)
H/P
You can listen to the sound through the headphone.
1. How to connect
1Plug	the	he adphone 	int o 	the 	he ad-
phone	so\bket.
\bTo	adjust	the 	he adphone 	v olume\f 	
press	the	VOL  +/-	button.	If 	y ou 	
press	the	M\bTE	button\f	the 	s ound 	
from	the	he adphone 	is 	s wit\bhed 	o ff.
!
?
!
?
NOTE
►	AUDIO	menu	op tions 	ar e 	dis abled 	when 	\b onne\bting 	a 	
headphone.
►	
When	\bhanging 	A V 	MODE 	with 	a 	he adphone 	\b on-
ne\bted\f	the	\bhange 	is 	applied 	t o 	video 	but 	no t 	t o 	audio .
►	Opti\bal	Digital	A udio 	O ut 	is 	no t 	a vailable 	when 	\b on-
ne\bting	a	he adphone.   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
44
ANTENNA/CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/D\fI
(D\fI)
/D\fI IN
COMPONENT IN A\f IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEOAUDIOL(MONO)R
\fIDEO
AUDIOY PBPRLR
OPTICAL 
DIGITALAUDIO OUT
AUDIO OUT CONNECTION
Send the TV’s audio to external audio equipment via the Audio Output port.
If you want to enjoy digital broadcasting through 5.1-channel speakers\f connect the OPTICAL DIGITAL 
AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 
!
?
!
?
NOTE
►	When	\bonne\bting 	with 	ext ernal 	audio 	equipment \f 	s u\bh 	
as	amplifiers 	or 	spe akers\f 	y ou 	\b an 	turn 	the 	T V 	spe akers 	
off	in	the 	menu. 		(►p.119)
!
?
!
?
CA\bTION
►	Do	not	look 	int o 	the 	op ti\bal 	output 	por t. 	L ooking 	a t 	
the	laser	be am 	may 	damage 	y our 	vision.
►	Audio	with	A CP 	( Audio 	C opy 	P rote\btion) 	f un\btion 	may 	
blo\bk	digital	audio 	output .
1. How to connect
1Conne\bt	one	end 	o f 	the 	op ti\bal 	\b able 	t o 	the 	
TV	port	of	OPTICAL \fIGITAL A\b\fIO O\bT.
\bConne\bt	the	o ther 	end 	o f 	the 	op ti\bal 	\b able 	t o 	
the	digital	audio 	input 	on 	the 	audio 	equip-
ment.
3Set	the	“TV	S peaker	o ption	-	O ff”	i n	t he 	
AUDIO	menu.	(►p.119).	See	the	external	a udio 	
equipment	instru\btion	m anual	f or	o peration.
1
2 
						

							45
EXTERNAL  EQUIPMENT  SETUP
ANTENNA/CABLE IN
DC-IN(DVI)
OPTICAL  DIGITALAUDIO OUT
/DVI IN
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
12
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLR
RGB IN (PC)
AUDIO IN
RGB/DVI
RGB OUTPUTAUDIO
ANTENNA/ CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/DVIOPTICAL  DIGITALAUDIO OUT
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
DVI OUTPUTAUDIO
PC SETUP
This TV provides Plug and Play capability\f meaning that a PC adjusts automatically to the TV’s set
-
tings. 
1. How to connect
1Conne\bt	the 	V GA 	output 	o f 	the 	PC 	t o 	the 	
RGB IN (
PC )
 ja\bk	on 	the 	 TV.
\bConne\bt	PC	a udio	o utput	t o	t he	 	A\b\fIO IN 
( RGB/\fVI )
 
ja\bk	on	the	T V.
2. How to use
ꔛ	Turn	on	the 	PC 	and 	the 	 TV.
ꔛ	Sele\bt	the	RGB-PC	input	sour\be 	on 	the 	 TV 	using 	
the	INP\bT	button	on 	the 	r emote 	\b ontrol.
VGA (D-Sub 15 Pin) Connection
12   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
46
DVI to HDMI Connection
1. How to connect
1Conne\bt	the	D VI 	output 	o f 	the 	PC 	t o 	the 	
H\fMI/\fVI IN 1	or	2*	ja\bk 	on 	the 	 TV.
\bConne\bt	the	PC 	audio 	output 	t o 	the 	A\b\fIO IN 
(RGB/\fVI)
	ja\bk 	on 	the 	 TV.
2. How to use
ꔛ	Turn	on	the 	PC 	and 	the 	 TV.
ꔛ		Sele\bt	the	H\fMI1	or	H\fMI2*	input 	sour\be 	on 	the 	
TV	using	the 	INP\bT	button	on	the 	r emote 	\b ontrol.
ANTENNA/
CABLE IN
DC-IN
(DVI)
OPTICAL 
DIGITALAUDIO OUT
/DVI IN
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
12
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLR
RGB IN (PC)
AUDIO IN
RGB/DVI
RGB OUTPUTAUDIO
ANTENNA/ CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/DVIOPTICAL  DIGITALAUDIO OUT
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
DVI OUTPUTAUDIO
1
2
*	HDMI2:
	For 	3 2/42/47/55LD520\f 	55LD52 0C\f 	4 2/47/55LD630 
						

							47
EXTERNAL  EQUIPMENT  SETUP
Supported Display Specifications (RGB-PC\f HDMI-PC)
!
?
!
?
NOTE
►To	get	the	the	b est	p i\bture	q uality\f	a djust	t he	P C	g raphi\bs	\b ard	t o	1360 x 768 (19/22/26LE5300\f	
22/26LE5500)	or	1920 x 1080 (Other	models).
►Depending	on	the 	gr aphi\bs 	\b ard\f 	DO S 	mode 	may 	no t 	w ork 	if 	a 	HDMI 	t o 	D VI 	Cable 	is 	in 	us e.
►In	PC	mode\f 	ther e 	may 	be 	nois e 	as so\biated 	with 	the 	r esolution\f 	v erti\bal 	pa ttern\f 	\b ontrast 	or 	bright-
ness.	If	nois e 	is 	pr esent\f 	\bhange 	the 	PC 	output 	t o 	ano ther 	r esolution\f 	\bhange 	the 	r efresh 	r ate 	t o 	
another	rate	or 	adjus t 	the 	brightne ss 	and 	\b ontrast 	on 	the 	PICTURE 	menu 	until 	the 	pi\btur e 	is 	\ble ar.
►Avoid	keeping	a 	fix ed 	image 	on 	the 	s \breen 	f or 	a 	long 	period 	o f 	time. 	The 	fix ed 	image 	may 	be\b ome 	
permanently	imprinted 	on 	the 	s \breen.
►The	syn\bhronization	input 	f orm 	f or 	Horiz ontal 	and 	V erti\bal 	f requen\bies 	is 	s eparate.
►Depending	on	the 	gr aphi\bs 	\b ard\f 	s ome 	r esolution 	s ettings 	may 	no t 	allo w 	the 	image 	t o 	be 	po si-
tioned	on	the 	s \breen 	pr operly.
►When	sele\bting	HDMI-PC\f 	s et 	the 	“Input 	L abel 	- 	PC ” 	i n	t he	O PTION	m enu. 	
ResolutionHorizontal	Frequen\by(
kHz )Verti\bal	Frequen\by (
Hz )
640x350 31.468 70.09
720x400 31.469 70.08
640x480 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.776 59.87
1360x76847.71260.015
1280x102463.981 60.02
1600x120075.0060.00
1920x1080
RGB-PC66.587 59.934
1920x1080
HDMI-PC67.50 60.00
Ex\bept	19/22/26LE5300\f 	22/26LE5500
Ex\bept	32/37/42/47/55LE5300\f 	42/47/55LE7300   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
48
Screen Setup for PC mode
You can choose the resolution in RGB-PC mode.
The Position\f Phase\f and Size can also be adjusted.
You can choose this option only when the PC resolution is set to 10\b4X768\f 1\b80X768 or 1360X768.
Selecting Resolution
1MENUSele\bt	PICT\bRE.
2ENTERSele\bt	Screen (RGB-PC).
3ENTERSele\bt	Resolution.
4ENTERSele\bt	the	de sired 	r esolution.
5ENTER
PICTUREꔂ Move    ꔉ Enter
   •  Brightness  50   • Sharpness  70   • Color  60   • Tint  0   • Color Temp.  0   • Advanced Control   • Picture Reset• Screen (RGB-PC)
RGWC
ꔉꔠ
ꔑ 1024 x 768
□  1280 x 768
□  1360 x 768
Auto Config.
Resolution
Position
Size
Phase
Reset
SCREENꔂ Move    � Prev. 
						

							49
EXTERNAL  EQUIPMENT  SETUP
Automatically adjusts picture position and minimizes image instability. After adjustment\f if the image 
is still not correct\f try using the manual settings or a different resolution or refresh rate on the PC.
Auto Configure
1MENUSele\bt	PICT\bRE.
2ENTERSele\bt	Screen (RGB-PC).
3ENTERSele\bt	Auto Config..
4ENTERSele\bt	Yes.
5ENTERStart	Auto	C onfiguration.
ꔛ	If	the	position 	o f 	the 	image 	is 	s till 	no t 	
\borre\bt\f	try	A uto 	adjus tment 	again.
ꔛ	If	pi\bture	needs 	t o 	be 	adjus ted 	again 	
after	Auto	adjus tment 	in 	R GB-PC\f 	
you	\ban	adjus t 	the 	Position\f	Size or	
Phase.
PICTUREꔂ Move    ꔉ Enter
   •  Brightness  50   • Sharpness  70   • Color  60   • Tint  0   • Color Temp.  0   • Advanced Control   • Picture Reset• Screen (RGB-PC)
RGWC
ꔉꔠ
Auto Config.
Resolution
Position
Size
Phase
Reset
Auto Config.
YesNo
SCREENꔂ Move    � Prev.   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
50
If the picture is not clear after auto adjustment or if text is shaking\f adjust the picture phase manually.
This feature operates only in RGB-PC mode.
Adjustment for screen Position\f Size\f and Phase
1MENUSele\bt	PICT\bRE.
2ENTERSele\bt	Screen (RGB-PC).
3ENTERSele\bt	Position\f	Size\f	or	Phase.
4ENTERMake	appropriate 	adjus tments.
5ENTER
ꔛ	Position:	This	fun\btion 	is 	t o 	adjus t 	
pi\bture	to	left /right 	and 	up /down 	as 	
you	prefer.	
ꔛ	Size:	This	fun\btion 	is 	t o 	minimiz e 	any 	
verti\bal	bars	or 	s tripes 	visible 	on 	the 	
s\breen	ba\bkground. 	And 	the 	horiz on-
tal	s\breen	siz e 	will 	als o 	\bhange.
ꔛ	Phase:	This	fun\btion 	allo ws 	y ou 	t o 	
remove	any	horizontal	n oise	a nd 	
\blear	or	sharpen 	the 	image 	o f 	\bhar-
a\bters.
PICTUREꔂ Move    ꔉ Enter
   •  Brightness  50   • Sharpness  70   • Color  60   • Tint  0   • Color Temp.  0   • Advanced Control   • Picture Reset• Screen (RGB-PC)
RGWC
ꔉꔠ
Auto Config.
Resolution
Position
Size
Phase
Reset
▲◀▶▼
SCREENꔂ Move    � Prev.