Lexmark Z2320 User Manual

6Click Browse, and then navigate to the XPS driver files on your computer:
aClick Computer, and then double-click (C:).
bDouble-click Drivers, and then double-click Printer.
cDouble-click the folder that has your printer model number, and then double-click Drivers.
dDouble-click xps, and then click Open.
eFrom the Install From Disk dialog, click OK.
7Click Next on the two additional dialogs that appear.
For more information on the XPS driver, see the XPS readme f i l e  o n  t h e  i n s t a l l a t i o...

Using the Macintosh printer software
Use theTo
Print dialogAdjust the print settings and schedule print jobs.
Printer Services dialogAccess the printer utility.
Troubleshoot.
Order ink or supplies.
Contact Lexmark.
Check the printer software version installed on the computer.
Applications are also installed with the printer software during installation. These applications are saved in the printer
folder that appears on the Finder desktop after installation.
1From the Finder desktop, double-click the...

Loading paper
Loading paper
1Make sure:
You use paper designed for inkjet printers.
The paper is not used or damaged.
If you are using specialty paper, you follow the instructions that came with it.
You do not force paper into the printer.
2Load the paper vertically against the right side of the paper support.
3Adjust the paper guide until it rests against the left edge of the paper.
Note: To avoid paper jams, make sure the paper does not buckle when you adjust the paper guide.
Loading various paper...

Iron-on transfers
Load up to 10 iron-on transfers.
Make sure:
You follow the loading instructions that came with the iron-on transfers.
The print side of the transfers faces you.
The transfers are loaded against the right side of the paper support.
The paper guide rests against the left edge of the transfers.
Note: For best results, load transfers one at a time.
Cards
Load up to 25 greeting cards, index cards, photo cards, or postcards.
Make sure:
The total thickness of the card stack does not exceed 10...

Make sure:
You follow the loading instructions that came with the labels.
The print side of the labels faces you.
The adhesive on the labels does not extend to within 1 mm of the edge of the label.
You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during
printing, resulting in a paper jam.
The labels are loaded against the right side of the paper support.
The paper guide rests against the left edge of the labels.
Transparencies
Load up to 10...

Printing
Printing basic documents
Printing a document
1Load the paper.
1
2
2Do one of the following to print:
Using Windows
aWith a document open in a Windows program , click File ΠPrint.
bClick Properties, Preferences, Options, or Setup.
cSelect the print quality, the number of copies to print, the type of paper to be used, and how the pages should
print.
dClick OK to close any printer software dialogs.
eClick OK or Print.
Using Macintosh
aWith a document open in a Macintosh application, click File Œ...

1Load paper.
2Open a Web page using a supported browser.
3Select a print option to print the page.
You can also adjust settings or preview the page before printing.
Printing multiple copies of a document
Using Windows
1With a document open, click File ΠPrint.
2Click Properties, Preferences, Options, or Setup.
3From the Copies section of the Print Setup tab, enter the number of copies that you want to print.
4Click OK to close any printer software dialogs.
5Click OK or Print.
Using Macintosh
1With a...

Using Macintosh
1With a document open, click File ΠPrint.
2In the Copies field, enter the number of copies that you want to print, and then select Collated.
3Click Print.
Note: To prevent smudging when printing photos, remove each photo as it exits the printer, and then let it dry before
stacking.
Printing the last page first (reverse page order)
Using Windows
1With a document open, click File ΠPrint.
2Click Properties, Preferences, Options, or Setup.
3From the Copies section of the Print Setup tab,...

3From the Advanced tab, select N-Up under the Layout drop-down menu.
4Select the number of page images to print on each page.
If you want each page image to be surrounded by a border, then select Print Page Borders.
5Click OK to close any printer software dialogs.
6Click OK or Print.
Using Macintosh
1With a document open, click File ΠPrint.
2From the print options pop-up menu, choose Layout.
From the Pages per Sheet pop-up menu, choose the number of page images that you want to print on one
sheet.
From...

3Do one of the following:
If you want to cancel a particular print job, right-click the document name, and then select Cancel.
If you want to cancel all print jobs in the queue, click Printer ΠCancel All Documents.
Using the taskbar in Windows
1Double-click the printer icon in the taskbar.
2Do one of the following:
If you want to cancel a particular print job, right-click the document name, and then select Cancel.
If you want to cancel all print jobs in the queue, click Printer ΠCancel All Documents....