Lexmark X864de User Manual

							Change  to  load 
You can change the current paper source for the remainder of the print job. The formatted page will print on the paper
loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:
Select the paper tray with the correct paper size or type.
Touch Use current [src] to ignore the message and print from the tray selected for the print job.
Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are
specified in the printer control panel Paper menu.
Note: If you touch Continue when there is no paper in the tray, the job is not continued.
Touch Cancel job to cancel the current job.
Change  to 
You can change the current paper source for the remainder of the print job. The formatted page will print on the paper
loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:
Select the paper tray with the correct paper size or type.
Touch Use current [src] to ignore the message and print from the tray selected for the print job.
Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are
specified in the printer control panel Paper menu.
Note: If you touch Continue when there is no paper in the tray, the job is not continued.
Touch Cancel job to cancel the current job.
Change  to  load 
You can change the current paper source for the remainder of the print job. The formatted page will print on the paper
loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:
Select the paper tray with the correct paper size or type.
Touch Use current [src] to ignore the message and print from the tray selected for the print job.
Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are
specified in the printer control panel Paper menu.
Note: If you touch Continue when there is no paper in the tray, the job is not continued.
Touch Cancel job to cancel the current job.
Change  to  
You can change the current paper source for the remainder of the print job. The formatted page will print on the paper
loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:
Select the paper tray with the correct paper size or type.
Touch Use current [src] to ignore the message and print from the tray selected for the print job.
Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are
specified in the printer control panel Paper menu.
Note: If you touch Continue when there is no paper in the tray, the job is not continued.
Touch Cancel job to cancel the current job. Troubleshooting221
Downloaded From ManualsPrinter.com Manuals 
						

							Change  to   load 
You can change the current paper source for the remainder of the print job. The formatted page will print on the paper
loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:
Select the paper tray with the correct paper size or type.
Touch Use current [src] to ignore the message and print from the tray selected for the print job.
Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are
specified in the printer control panel Paper menu.
Note: If you touch Continue when there is no paper in the tray, the job is not continued.
Touch Cancel job to cancel the current job.
Check  guides
The  refers to the multipurpose feeder. The printer cannot determine the size of the paper.
Try one or more of the following:
Readjust the paper guides.
Check the tray configuration.
Check  orientation or guides
The printer does not know the actual paper size that is loaded in a tray due to an incorrect paper orientation setting,
or because tray guides are not in the proper location.
Try one or more of the following:
Move the guides in the tray to the correct positions for the paper size loaded.
Make sure the paper size setting matches the paper loaded in the tray:
1From the printer control panel Paper menu, check the Paper Size setting.
2Before sending the job to print, specify the correct size setting:
–For Windows users, specify the size from Print Properties.
–For Macintosh users, specify the size from the Page Setup dialog.
Close door 
Close the specified door.
Close cover 
Close the specified cover to clear the message.
Close surface H
Close the specified cover to clear the message. Troubleshooting222
Downloaded From ManualsPrinter.com Manuals 
						

							Disk corrupted
The printer attempted a hard disk recovery on a corrupted hard disk, and the hard disk cannot be repaired. The hard
disk must be reformatted.
Touch Reformat disk to reformat the hard disk and clear the message.
Note: Reformatting the disk deletes all the files currently stored on the disk.
Empty the hole punch box
Empty the hole punch box, and then reinsert it into the finisher. Wait for the message to clear.
Weblink server not set up. Contact system administrator.
An error occurred on the Weblink server, or the server is not configured properly. Touch Continue to clear the message.
If the message appears again, contact your system support person.
Disk Full ‑ Scan Job Canceled
The scan job canceled or stopped due to insufficient printer hard disk space.
Touch Continue to clear the message.
Fax memory full
There is not enough memory to send the fax job.
Touch Continue to clear the message.
Fax server To Format not set up. Contact system administrator.
The printer is in Fax Server mode, but the Fax Server setup has not been completed.
Try one or more of the following:
Touch Continue to clear the message.
Complete the Fax Server setup. If the message appears again, contact your system support person.
Fax Station Name not set up
The Fax Station Name has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
Touch Continue to clear the message.
Complete the Analog Fax Setup. If the message appears again, contact your system support person.
Fax Station Number not set up
The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly. Troubleshooting223
Downloaded From ManualsPrinter.com Manuals 
						

							Try one or more of the following:
Touch Continue to clear the message.
Complete the Analog Fax Setup. If the message appears again, contact your system support person.
Insert Tray 
Insert the specified tray into the printer.
Load  with 
 is a tray or feeder, and  is a paper type or size.
Try one or more of the following:
Load the specified paper in the tray.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
Cancel the current job.
Load  with 
Try one or more of the following:
Load the specified paper in the tray.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
Cancel the current job.
Load  with 
Try one or more of the following:
Load the specified paper in the tray.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
Cancel the current job.
Load  with  
Try one or more of the following:
Load the specified paper in the tray.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source. Troubleshooting224
Downloaded From ManualsPrinter.com Manuals 
						

							Cancel the current job.
Load  with 
Try one or more of the following:
Load the specified paper in the tray.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
Cancel the current job.
Load manual feeder with 
 is a paper type or size.
Try one or more of the following:
Load the specified paper in the multipurpose feeder.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
Cancel the current job.
Load Manual Feeder with 
Try one or more of the following:
Load the specified paper in the multipurpose feeder.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
Cancel the current job.
Load Manual Feeder with 
Try one or more of the following:
Load the specified paper in the multipurpose feeder.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
Cancel the current job. Troubleshooting225
Downloaded From ManualsPrinter.com Manuals 
						

							Load Manual Feeder with 
Try one or more of the following:
Load the specified paper in the multipurpose feeder.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
Cancel the current job.
Load Manual Feeder with  
Try one or more of the following:
Load the specified paper in the multipurpose feeder.
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
Cancel the current job.
Load Staples [G5, G11, G12]
Try one or more of the following:
Replace the specified staple cartridge in the finisher.
Touch Continue to clear the message and continue printing.
Touch Cancel job to cancel the print job.
Memory full, cannot print faxes
There is not enough memory to print the fax job.
Touch Continue to clear the message without printing. Held faxes will attempt to print after the printer has been
restarted.
Remove paper from 
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Remove paper from all bins
Remove the paper from all of the bins. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Remove paper from bin 
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing. Troubleshooting226
Downloaded From ManualsPrinter.com Manuals 
						

							If removing the paper does not clear the message, then touch Continue.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Replace all originals if restarting job.
One or more messages which interrupted a scan job are now cleared. Replace the original documents in the scanner
to restart the scan job.
Try one or more of the following:
Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the message.
Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF
immediately after the last successfully scanned page.
Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass immediately after
the last successfully scanned page.
Touch Finish job without further scanning i f  p a g e  j a m  r e c o v e r y  i s  a c t i v e .  T h e  j o b  e n d s  a t  t h e  l a s t  s u c c e s s f u l l y  s c a n n e d
page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active. The message clears. A new scan job containing the same parameters as
the previous job starts.
Replace last scanned page and jammed originals if restarting job.
One or more messages which interrupted a scan job are now cleared. Replace the original documents in the scanner
to restart the scan job.
Try one or more of the following:
Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the message.
Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF
immediately after the last successfully scanned page.
Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass immediately after
the last successfully scanned page.
Touch Finish job without further scanning i f  p a g e  j a m  r e c o v e r y  i s  a c t i v e .  T h e  j o b  e n d s  a t  t h e  l a s t  s u c c e s s f u l l y  s c a n n e d
page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active. The message clears. A new scan job containing the same parameters as
the previous job starts.
Restore Held Jobs?
Try one or more of the following:
Touch Continue to restore all held jobs stored on the printer hard disk.
Touch Do not restore if you do not want any print jobs to be restored. Troubleshooting227
Downloaded From ManualsPrinter.com Manuals 
						

							Replace jammed originals if restarting job.
One or more messages which interrupted a scan job are now cleared. Replace the original documents in the scanner
to restart the scan job.
Try one or more of the following:
Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the message.
Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF
immediately after the last successfully scanned page.
Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass immediately after
the last successfully scanned page.
Touch Finish job without further scanning i f  p a g e  j a m  r e c o v e r y  i s  a c t i v e .  T h e  j o b  e n d s  a t  t h e  l a s t  s u c c e s s f u l l y  s c a n n e d
page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active. The message clears. A new scan job containing the same parameters as
the previous job starts.
Scan Document Too Long
The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message.
Scanner ADF Cover Open
The ADF cover is open. The message clears when the cover is closed.
Scanner jam, remove all originals from the scanner
Clear all original documents from the scanner.
Scanner Jam Access Cover Open
Close the bottom ADF door to clear the message.
Serial 
The printer is using a serial cable connection. The serial port is the active communication link.
Some held jobs were not restored
Touch Continue to delete the specified job.
Note: Some held jobs are not restored. They stay on the hard disk and are inaccessible.
30 Invalid refill, change cartridge
Remove the print cartridge, and then install a supported one. Troubleshooting228
Downloaded From ManualsPrinter.com Manuals 
						

							31.yy Replace defective or missing cartridge
The toner cartridge is either missing or not functioning properly.
Try one or more of the following:
Remove the toner cartridge, and then reinstall it.
Remove the toner cartridge, and then install a new one.
32 Cartridge part number unsupported by device
Remove the print cartridge, and then install a supported one.
34 Short paper
Try one or more of the following:
Load the appropriate paper or other specialty media in the proper tray.
Touch Continue to clear the message and print the job using a different paper tray.
Check tray length and width guides and make sure the paper is properly loaded in the tray.
Check the Print Properties or Print dialog settings to make sure the print job is requesting the correct paper size
and type.
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper
is large enough for the data being printed.
Cancel the current print job.
34 Incorrect media, check  guides
Try one or more of the following:
Load the appropriate paper or other specialty media in the tray.
Press the up or down arrow button until Continue appears, and then press  to clear the message and
print the job using a different tray.
35 Insufficient memory to support Resource Save feature
Try one or more of the following:
Touch Continue to disable Resource Save and continue printing.
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
Install additional memory.
37 Insufficient memory to collate job
Try one or more of the following:
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
Cancel the current print job. Troubleshooting229
Downloaded From ManualsPrinter.com Manuals 
						

							37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
Touch Continue to stop the defragment operation and continue printing.
Delete fonts, macros, and other data in printer memory.
Install additional printer memory.
37 Insufficient memory, some Held Jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Touch Continue to clear the message.
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the up or down arrow button until 
Continue appears, and then press  to clear the message.
38 Memory full
Try one or more of the following:
Touch Continue to clear the message.
Cancel the current print job.
Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
Touch Continue to clear the message and continue printing.
Cancel the current print job.
Install additional printer memory.
50 PPDS font error
Try one or more of the following:
Touch Continue to clear the message and continue printing.
The printer cannot find a requested font. From the PPDS menu, select Best Fit, and then select On. The printer will
find a similar font and reformat the affected text.
Cancel the current print job. Troubleshooting230
Downloaded From ManualsPrinter.com Manuals