Lexmark X6570 User Manual

							2Remove all tape and packing material from all areas of the printer.
3Raise the control panel.
4Extend the paper exit tray.
5Raise the paper support.
 
21
Downloaded From ManualsPrinter.com Manuals 
						

							6Extend the paper guides.
7Load paper.
8Connect the power cord.
2
1
9Make sure the power is on.
 
22
Downloaded From ManualsPrinter.com Manuals 
						

							10If prompted, set the language.
211
aUsing the control panel of the printer, press  or  repeatedly until the language you want appears on the
display.
bPress  to save.
11If prompted, set the country/region.
211
aUsing the control panel of the printer, press  or  repeatedly until the country or region you want appears
on the display.
bPress  to save.
12Open the printer.
13Press down on the cartridge carrier levers.
 
23
Downloaded From ManualsPrinter.com Manuals 
						

							14Remove the tape from the black print cartridge, and insert it in the left cartridge carrier.
15Close the black cartridge carrier lid
16Remove the tape from the color print cartridge, and insert it in the right cartridge carrier.
17Close the color cartridge lid.
 
24
Downloaded From ManualsPrinter.com Manuals 
						

							18Close the printer.
19Press .
An alignment page prints.
20Discard the alignment page.
Notes:
The alignment page that prints may differ from the one shown.
Streaks on the alignment page are normal and not an indication of a problem.
Installing the printer on additional network computers
If you are installing your network printer for use with multiple computers on the network, insert the installation CD
into each additional computer, and follow the instructions on the computer screen.
You do not need to repeat the connection steps for each computer you want to print to the printer.
The printer should appear as a highlighted printer in the installation. If multiple printers appear in the list, make
sure you select the printer with the correct IP address/MAC address. If you need help finding the IP or MAC
address, see “Finding the MAC address” on page 51.
 
25
Downloaded From ManualsPrinter.com Manuals 
						

							Setting up the printer on a Windows operating system
1Before you unpack the printer or attach anything, locate the CD for Windows.
2Make sure the computer is on, and then insert the CD for Windows.
Wait several seconds for the install screen to appear.
Note: If the install screen does not appear automatically, click Start ΠRun, and then type D:\setup.exe, where
D is the letter of your CD-ROM drive.
3Follow the instructions on the computer screen to set up the printer.
Your security software may notify you that Lexmark software is trying to communicate with your computer
system. Always allow these programs to communicate. This is necessary for the printer to work properly.
Lexmark XXXX Series Installation
Welcome...
To prevent errors during installation, close all
open programs.
Security InformationDocumentationSupport
Click Install to begin.
 
26
Downloaded From ManualsPrinter.com Manuals 
						

							Getting the printer ready to fax
Using an RJ11 adapter
Country/region
United Kingdom
Ireland
Finland
Norway
Denmark
Italy
Sweden
Netherlands
France
Portugal
To connect your printer to an answering machine or other telecommunications equipment, use the telephone line
adapter included in the box with the printer.
1Connect one end of the telephone cord into the Line port  of the printer.
2Connect the adapter to the telephone line that came with the printer.
Note: The UK adapter is shown. Your adapter may look different, but it will fit the telephone outlet used in your
location.
3Connect the telephone line of your chosen telecommunications equipment to the left outlet of the adapter.
 
27
Downloaded From ManualsPrinter.com Manuals 
						

							If your telecommunications equipment uses a US-style (RJ11) telephone line, follow these steps to connect the
equipment:
1Remove the plug from the EXT port on the back of the printer.
Note: Once this plug is removed, any country- or region-specific equipment you connect to the printer by the
adapter, as shown, will not function properly.
2Connect your telecommunications equipment directly to the EXT port on the back of the printer.
Warning: Do not touch cables or the printer in the area shown while actively sending or receiving a fax.
Country/region
Saudi Arabia
United Arab Emirates
Egypt
Bulgaria
Czech Republic
Belgium
Australia
South Africa
Greece
Israel
Hungary
Poland
Romania
Russia
Slovenia
Spain
Turkey
 
28
Downloaded From ManualsPrinter.com Manuals 
						

							To connect an answering machine or other telecommunications equipment to the printer:
1Remove the plug from the back of the printer.
Note: Once this plug is removed, any country- or region-specific equipment that you connect to the printer by
the adapter, as shown, will not function properly.
2Connect your telecommunications equipment directly to the EXT port on the back of the printer.
Warning: Do not touch cables or the printer in the area shown while actively sending or receiving a fax.
Country/region
Germany
Austria
Switzerland
There is a plug installed in the EXT port of the printer. This plug is necessary for the proper functioning of the printer.
Note: Do not remove the plug. If you remove it, other telecommunications devices in your home (such as telephones
or answering machines) may not work.
 
29
Downloaded From ManualsPrinter.com Manuals 
						

							Choosing a fax connection
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. If
problems occur, see “Setup Troubleshooting” on page 137.
Note: The printer is an analog device that works best when directly connected to the wall jack. Other devices (such
as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the
setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter)
is required.
You do not need to attach the printer to a computer, but you do need to connect it to a telephone line to send and
receive faxes.
You can connect the printer to other equipment. See the following table to determine the best way to set up the
printer.
EquipmentBenefitsSee this section
The printer
A telephone cord
Send and receive faxes without using a
computer.“Connecting directly to a telephone
wall jack” on page 32
The printer
A telephone
Two telephone cords
Use the fax line as a normal telephone
line.
Send and receive faxes without using a
computer.
“Connecting to a telephone” on
page 34
The printer
A telephone
An answering machine
Three telephone cords
Receive both incoming voice messages and
faxes.“Connecting to an answering
machine” on page 30
The printer
A telephone
A computer modem
Three telephone cords
Send faxes using the computer or the
printer.“Connecting to a computer with a
modem” on page 33
Connecting to an answering machine
Connect an answering machine to the printer to receive both incoming voice messages and faxes.
Note: Setup steps may vary depending on your country or region. For more information on connecting the printer
to telecommunications equipment, see the related topic, “Using an RJ11 adapter.”
1Make sure you have the following:
A telephone
An answering machine
Three telephone cords
A telephone wall jack
 
30
Downloaded From ManualsPrinter.com Manuals