Lexmark X5650 User Manual

Use theTo
6Automatic Document Feeder (ADF) trayLoad original documents in the ADF. Recommended for
scanning, copying, or faxing multiple-page documents.
Note: Do not load postcards, photos, small items, or thin
media (such as magazine clippings) into the ADF. Place
these items on the scanner glass.
7Automatic Document Feeder (ADF) output trayHold documents as they exit from the ADF.
8Automatic Document Feeder (ADF) paper guideKeep paper straight when feeding into the ADF.
9Printer control panelOperate...

6
7 5
83
4
1
2
9
Use theTo
1Top coverAccess the scanner glass.
2Scanner glassScan and copy photos and documents.
3Scanner unitAccess the print cartridges.
Remove paper jams.
4Print cartridge carrierInstall, replace, or remove a print cartridge.
5EXT Port
EXT
Connect additional devices, such as a data/fax
modem, telephone, or answering machine, to the
printer. This connection method may not be
available in all countries or regions.
Note: Remove the plug to access the port.
6LINE Port
LINE
Connect the...

Use theTo
8Rear USB portConnect the printer to a desktop computer using a
USB cable.
Warning—Potential Damage: Do not touch the
USB port except when plugging in or removing a
USB cable or installation cable.
9Internal wireless print server
Note: Your printer model may not have wireless
capability and may not have this print server.Connect the printer to a wireless network.
Using the printer control panel buttons and menus
Using the printer control panel
The printer control panel contains:
Power on/off...

123456
7891011
PressTo
1SetupAccess the setup menu and change printer settings.
Note: The Copy, Scan, and Photo button lights are off when this button is selected.
2Address BookAccess fax numbers from a saved list of numbers.
3Redial/PauseIn Fax mode:
Insert a three-second pause in the number to be dialed to wait for an outside line or get
through an automated answering system. Enter a pause only when you have already
begun entering the number.
Display the last number dialed. Press the arrow buttons to...

PressTo
10Access the copy menu and make copies.
11Turn the printer on and off.
Switch to Power Saver mode.
Note: Press 
 to switch to Power Saver mode. Press and hold  for two seconds to
turn off the printer.
12345
67
PressTo
1Decrease a number.
Delete a letter or number.
Move the cursor one place to the left.
Scroll through menus, submenus, or settings on the display.
2Select a menu item that appears on the display.
Save settings.
Move one level deeper in a submenu.
Feed or eject paper. Press and hold...

PressTo
5Cancel a print, copy, scan, or fax job in progress.
Exit from a menu level of the Copy, Scan, Fax, Photo, or File Print menu to the top level
of a menu.
Exit from a menu level of the Setup menu to the top level of the previous mode.
Clear current settings or error messages, and return to default settings.
6Color / BlackSwitch to color mode or black-and-white mode.
7Start a print, scan, or copy job, depending on which mode is selected.
Using the printer menus
A number of menus are available to...

Menus List
Setup menu Photo menu
Maintenance
Ink Levels
Clean Cartridges
Align Cartridges
Print Test Page
Device Setup
Language
Country
Date/Time
Host Fax Settings
Button Beep
Power Saver
Clear Settings Timeout
Fax Setup
Address Book
Reports
Ringing and Answering
Fax Printing
Dialing and Sending
Fax Blocking
Network Setup (appears only if the printer has an
internal wireless print server)
Print Setup Page
Wi-Fi Protected Setup
Wireless Information
TCP/IP
Network Time
File Print
Reset Network Adapter...

Copy menu Scan menu Fax menu PictBridge menu
Copies
Quality
Lighter/Darker
Resize
Original Size
Photo Reprint
Collate
Pages per Sheet
Copies per Sheet
Content TypeScan to
Computer
Network (appears only
if the printer is
connected to a
network)
USB Flash Drive
Memory Card
Quality
Original SizeFax to
Quality
Standard
Fine
Superfine
Ultrafine
Lighter/Darker
Original Size
Letter
A4
Schedule Fax
Send Now
Send Later
View Pending
Address BookNote: The PictBridge menu
is enabled only when you
insert a...

Temporary settings
Copy menuCopies
Resize
Lighter/Darker
Quality
Copies per Sheet
Pages per Sheet
Original Size
Content Type
Scan menuQuality
Original Size
Fax menuLighter / Darker
Quality
Photo menuThe following Photo options will not time out after two minutes of inactivity or after
turning off the power but will return to the default factory settings when a memory
card or flash drive is removed.
Photo Effects
Photo Size
Layout
Quality
To change the temporary settings into new default settings
1
From...

Changing the Power Saver timeout
You can customize the Power Saver timeout of the printer. The Power Saver timeout is the time it takes for the printer
to switch to Power Saver mode when the printer is left idle. Change the Power Saver timeout to avoid interruptions
when doing multiple jobs on your printer.
1From the printer control panel, press .
2Press the arrow buttons until Device Setup appears, and then press .
3Press the arrow buttons until Power Saver appears, and then press .
4Press the arrow...