Lexmark X463de User Manual

Understanding the ADF and scanner glass
Automatic Document Feeder (ADF)Scanner glass
Use the ADF for multiple‑page documents.
Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine
clippings).
You can use the ADF or the scanner glass to scan documents.
Using the ADF
The ADF can scan multiple pages, including duplex pages. If duplex settings are selected, the ADF scans both sides of
the page automatically. When using...

Understanding the printer control panel
12ABC3DEF6MNO5JKL4GHI9WXYZ8TUV7PQRS# 0*
1
2
4
5
6
7 8
3
ItemDescription
1Display View scanning, copying, faxing, and printing options as well as status and error messages.
2Keypad
12ABC3DEF
6MNO5JKL4GHI
9WXYZ8TUV7PQRS
# 0*
Enter numbers or symbols on the display.
3Dial Pause
Press  to cause a two- or three-second dial pause in a fax number. In the Fax To field, a
Dial Pause is represented by a comma (,).
From the home screen, press  to redial a fax number.
The...

ItemDescription
6Start
Press  to initiate the current job indicated on the display.
From the home screen, press  to start a copy job with the default settings.
If pressed while a job is scanning, the button has no effect.
7Indicator light Indicates the printer status:
Off—The power is off.
Blinking green—The printer is warming up, processing data, or printing.
Solid green—The printer is on, but idle.
Blinking red—Operator intervention is needed.
8Stop
Stops all printer activity
A list of options is...

Display itemDescription
5Status message bar
Shows the current printer status such as Ready or Busy.
Shows printer conditions such as Toner Low.
Shows intervention messages to give instructions on what you should do so the printer can
continue processing, such as Close door.
6Status/Supplies Appears on the display whenever the printer status includes a message requiring intervention.
Touch it to access the messages screen for more information on the message, including how
to clear it.
7Tips All menus have...

Sample touch screen
ButtonFunction
Home
Returns to the home screen
Down arrow
Opens an options screen
Left scroll decrease
Scrolls to another value in decreasing order
Right scroll increase
Scrolls to another value in increasing order
Left arrow
Scrolls left
Right arrow
Scrolls right
Back
Navigates back to the previous screen
Learning about the printer25
Downloaded From ManualsPrinter.com Manuals 

Other touch-screen buttons
ButtonFunction
Submit
Saves a value as the new default setting
Down arrow
Moves down to the next screen
Up arrow
Moves up to the next screen
Unselected radio button
This is an unselected radio button. The radio button is gray to show it is unselected.
Selected radio button
This is a selected radio button. The radio button is blue to show it is selected.
Cancel Jobs
Opens the Cancel Jobs screen. The Cancel Jobs screen shows three headings: Print,
Fax, and Network.
The following...

ButtonFunction
Cancel
Cancels an action or a selection
Cancels out of a screen and returns to the previous screen
Select
Opens the next related menu or menu item
Features
FeatureDescription
Menu trail line:
Menus > Settings > Copy Settings >
Number of CopiesA Menu trail line is located at the top of each menu screen. This feature acts as a
trail, showing the path taken to arrive at the current menu. It gives the exact location
within the menus.
Touch any of the underlined words to return to that menu or...

Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
You can customize your printer connectivity and memory capacity by adding optional...

Accessing the system board to install internal options
Note: This task requires a flathead screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
1Loosen the screws on the back of...

2Lift the front of the scanner unit to open the system board.
3Use the following illustration to locate the appropriate connector.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any system board electronic components or connectors.
1Flash memory or firmware card connectors
2Fax card connector
3Lexmark Internal Solutions Port or printer hard disk connector
4Memory card connector
Additional printer...