Lexmark X463de User Manual

Using the printer control panel
1
Make sure the printer is on and Ready appears.
2On the home screen, touch .
3Touch Settings.
4Touch General Settings.
5Touch the down arrow until Screen Brightness appears.
6Touch the arrows to select a setting.
7Touch Submit.
8Touch .
Setting the standard exit bin light
To save energy, you can dim or turn off the output lighting for the standard exit bin.
Available settings are Off, Dim, and Bright.
The factory default setting for Normal/Standby Mode is Bright.
The...

7Touch the arrow button next to Power Saver to select the light setting the standard exit bin will use when in
Power Saver mode.
Note: For more information on Power Saver mode, see “Adjusting Power Saver” on page 70.
8Touch Submit.
9Touch .
Recycling
Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information,
see:
The Notices chapter
The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment
The Lexmark recycling...

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and
use the pre‑paid shipping label. You can also:
1Visit our Web site at www.lexmark.com/recycle.
2From the Toner Cartridges section, select your country from the list.
3Follow the instructions on the computer screen.
Reducing printer noise
Use Quiet Mode to reduce the printer noise.
Note: See the table for the multiple settings that change when you select a Quiet Mode setting.
ChooseTo...

Loading paper and specialty media
This section explains how to load the trays and feeders. It also includes information about paper orientation, setting
the Paper Size and Paper Type, and linking and unlinking trays.
Setting the Paper Size and Paper Type
The Paper Size setting for the standard 250 tray and the multipurpose feeder must be set manually from the Paper size
menu. The factory default Paper Type setting is Plain Paper. The Paper Type setting must be set manually for all trays
that do not...

8Touch Submit to save your selection.
Submitting Selection appears, followed by the Paper menu.
9Touch  to return to the home screen.
Avoiding jams
The following hints can help you avoid jams:
Paper tray recommendations
Make sure the paper lies flat in the paper tray.
Do not remove the paper tray while the printer is printing.
Do not load the paper tray while the printer is printing. Load it prior to printing, or wait for a prompt to load it.
Do not load too much paper. Make sure the stack height does...

2Squeeze and slide the guides to the correct position for the paper size you are loading.
For long paper like A4 or legal, squeeze and slide the length guide backwards to accommodate the length of paper
you are loading.
Loading paper and specialty media76
Downloaded From ManualsPrinter.com Manuals 

If you are loading A6‑size paper:
aSqueeze and slide the length guide toward the center of the tray to the A5 size position.
bRaise the A6 backstop.
Notes:
The standard tray accommodates only 150 sheets of A6‑size paper. Notice the maximum fill line on the A6
backstop which indicates the maximum height for loading A6‑size paper. Do not try to overload the tray.
A6‑size paper cannot be loaded in the optional tray.
Note: Use the size indicators on the bottom of the tray to help position the guide.
3Flex a...

1
1Maximum fill line
Load letterhead with the top edge of the sheet toward the front of the tray and the design facedown.
LETTERHEAD
5Squeeze and slide the guides to lightly touch the side of the stack.
1
2
Loading paper and specialty media78
Downloaded From ManualsPrinter.com Manuals 

6Insert the tray.
7If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper
Size/Type setting on the Paper menu.
Using the multipurpose feeder
You may want to use the multipurpose feeder when you print on different sizes and types of papers or specialty media,
such as card stock, transparencies, paper labels, and envelopes. You may also want to use the multipurpose feeder for
single‑page print jobs on letterhead or on other specialty media you do...

2Grasp the raised handle, and pull the extension forward.
3Grasp the handle, and pull the extension so it flips forward.
4Guide the extension down gently so the multipurpose feeder is extended fully and open.
Loading paper and specialty media80
Downloaded From ManualsPrinter.com Manuals