Lexmark X3550 User Manual

							Limited Warranty
DescriptionWhere to find (US)Where to find (rest of world)
Limited Warranty Information
Lexmark International, Inc.
furnishes a limited warranty that this
printer will be free of defects in
materials and workmanship for a
period of 12 months after the
original date of purchase.To view the limitations and conditions of
this limited warranty, see the Statement of
Limited Warranty included with this
printer, or set forth at
www.lexmark.com.
1Click CUSTOMER SUPPORT.
2Click Warranty Information.
3From the Statement of Limited
Warranty section, click Inkjet &
All-In-One Printers.
4Scroll through the Web page to view
the warranty.
Warranty information varies by
country or region. See the printed
warranty that shipped with your
printer.
Record the following information (located on the store receipt and the back of the printer), and have it ready when
you contact us so that we may serve you faster:
Machine Type number
Serial number
Date purchased
Store where purchased
 
11
Downloaded From ManualsPrinter.com Manuals 
						

							Setting up the printer
Checking the box contents
NameDescription
1Black print cartridgeCartridges to be installed into the printer.
Note: Cartridge combinations vary depending on the product
purchased.
2Color print cartridge
3Power cordAttaches to the power supply port located at the back of the printer.
Note: Your power cord may look different from the one shown.
4Installation software CD for WindowsInstallation software for the printer
Help
Users Guide in electronic format
5Installation software CD for MacintoshInstallation software for the printer
Mac Help
6Getting StartedPrinted booklet that serves as a guide.
Note: Complete user information (Users Guide or Mac Help) can be
found on the installation software CDs.
7Quick Setup sheetInitial setup directions
8Installation cableConnects the printer to the computer temporarily during some
methods of installation.
 
12
Downloaded From ManualsPrinter.com Manuals 
						

							Installing another language control panel
These instructions apply only if you received one or more additional language control panels with the printer.
1Lift and remove the control panel (if one is installed).
2Choose the correct control panel for your language.
3Align the clips on the control panel with the holes on the printer, and then press down.
 
13
Downloaded From ManualsPrinter.com Manuals 
						

							Networking the printer
For complete networking information, please refer to the Getting Started booklet that came with the product.
Installing the printer on a network
Follow the instructions for the networking method you want to use. Make sure the selected network is set up and
working properly, and that all relevant devices are turned on. For more information on your specific network, see
your network documentation or consult the person who set up the network.
Installing an internal wireless print server
The printer you purchased may contain an internal wireless print server that allows the printer to be used on a wireless
network. If your printer does not have an internal wireless print server already installed, you can purchase one
separately. Use the following instructions to install the internal wireless print server:
1Turn off your printer, and then unplug the power cord from the wall outlet.
Warning: Failure to unplug the printer can cause damage to your printer and to the internal wireless print server.
Make sure the printer is turned off and the power cord is unplugged from the wall outlet before you proceed.
2Remove the back cover plate by pushing the tab down and then pulling the cover away from the printer.
3Unpack the internal wireless print server. Save the packaging materials.
Warning: Wireless print servers are easily damaged by static electricity. Touch something metal such as the
printer frame before you touch the wireless print server.
 
14
Downloaded From ManualsPrinter.com Manuals 
						

							4Align the edges of the internal wireless print server with the guides on the left and right, and then slide the wireless
print server into the printer until it snaps into place.
5Make sure the antenna points up.
6Attach the adhesive label with the MAC address to the back of the printer. You will need this later to in order to
network the printer.
You are now ready to configure the internal wireless print server to work on your wireless network.
Finding your MAC address
In order to complete the network configuration of your printer, you may need the media access control (MAC) address
of the printer or print server. The MAC address is a series of letters and numbers located on the back of your printer.
If you purchased the internal wireless print server separately, the MAC address appears on an adhesive label that
came with the wireless print server. Attach the adhesive label to your printer so you will be able to find the MAC
address when you need it.
 
15
Downloaded From ManualsPrinter.com Manuals 
						

							Learning about the printer
Understanding the parts of the printer
Use theTo
1Paper supportLoad paper.
2Wi-Fi indicatorCheck wireless status:
Off indicates that the printer is not turned on or that no wireless option is installed.
Orange indicates that the printer is ready for wireless connection, but not connected.
Orange blinking indicates that the printer is configured but unable to communicate
with the wireless network.
Green indicates that the printer is connected to a wireless network.
3PictBridge portConnect a PictBridge-enabled digital camera or a flash drive to the printer.
4Memory card slotsInsert a memory card.
5Control panelOperate the printer.
For more information, see “Using the control panel” on page 17.
6Paper exit trayHold paper as it exits.
7Paper feed guardPrevent items from falling into the paper slot.
8Paper guideKeep paper straight when feeding.
9Top coverAccess the scanner glass.
10Scanner glassCopy or remove an item.
 
16
Downloaded From ManualsPrinter.com Manuals 
						

							Use theTo
1Scanner unitAccess the print cartridges.
2Print cartridge carrierInstall, replace, or remove a print cartridge.
3Lexmark N2050 (internal wireless print server)Connect the printer to a wireless network.
Note: Only the 4500 Series comes with an internal wireless
print server installed.
4USB portConnect the printer to a computer using a USB cable.
5Power supply with portConnect the printer to a power source.
Using the control panel buttons and menus
Using the control panel
The display shows:
Printer status
Messages
Menus
12
3
45
7 6
PressTo
1Turn the printer on and off.
Stop the print, copy, or scan process.
 
17
Downloaded From ManualsPrinter.com Manuals 
						

							PressTo
2Copy ModeAccess the copy default screen and make copies.
Note: The mode is selected when the button light is on.
3Scan ModeAccess the scan default screen and scan documents.
Note: The mode is selected when the button light is on.
4Photo CardAccess the photo default screen and print photos.
Note: The mode is selected when the button light is on.
5SettingsAccess the settings default screen and change printer settings.
Note: Other button lights are off when this button is selected.
6Lighter / DarkerAdjust the brightness of a copy or photo.
7Display the Copy, Scan, or Photo Card menu, depending on which mode is selected.
3 2 1
4
5
PressTo
1Return to the previous screen.
Delete a letter or number.
2Decrease a number.
Delete a letter or number.
Scroll through menus, submenus, or settings on the display.
3Select a menu or submenu item that appears on the display.
Feed or eject paper.
4Increase a number.
Enter a space between letters or numbers.
Scroll through menus, submenus, or settings on the display.
5Cancel a print, copy, or scan job in progress.
Exit a menu or submenu, and return to the default copy, scan, or photo card screen.
Clear current settings or error messages, and return to default settings.
 
18
Downloaded From ManualsPrinter.com Manuals 
						

							PressTo
1Start ColorStart a color copy, scan, or photo print job, depending on which mode is selected.
2Start BlackStart a black-and-white copy, scan or photo print job, depending on which mode is selected.
Using the Copy menu
To access and navigate the Copy menu:
1From the control panel, press Copy Mode.
The copy default screen appears.
2If you do not want to change a setting, press Start Color or Start Black.
3If you want to change a setting, press .
4Press  or  repeatedly until the menu item you want appears.
5Press .
6Press  or  repeatedly until the submenu item you want or the setting you want appears.
7Press .
Note: Pressing 
 selects a setting. An * appears next to the selected setting.
8To go into additional submenus and settings, repeat step 6 and step 7 as needed.
9If necessary, press  repeatedly to return to the previous menus and make other setting selections.
10Press Start Color or Start Black.
 
19
Downloaded From ManualsPrinter.com Manuals 
						

							Use thisTo
Copies*Specify how many copies to print.
Resize*Specify the percentage for enlarging or reducing the original copy.
Specify a specific copy size.
Create a multiple-page poster.
Lighter / Darker*Adjust the brightness of a copy.
Quality*Adjust the quality of a copy.
Paper SetupSpecify the size and type of the paper loaded.
Repeat Image*Choose how many copies of an image to print on a page.
CollatePrint one or more copies in the correct order.
N-Up*Choose how many pages to print on a page.
Original Size*Specify the size of the original document.
Original Type*Specify the type of the original document.
* Temporary setting. For information on saving temporary and other settings, see “Saving settings” on
page 25.
Using the Scan menu
To access and navigate the Scan menu:
1From the control panel, press Scan Mode.
The scan default screen appears.
2Press  or  repeatedly until the scan destination you want appears.
3If you do not want to change a setting, press Start Color or Start Black.
4If you want to change a setting, press .
5Press  or  repeatedly until the menu item you want appears.
6Press .
7Press  or  repeatedly until the submenu item you want or the setting you want appears.
8Press .
Note: Pressing 
 selects a setting. An * appears next to the selected setting.
9To go into additional submenus and settings, repeat step 7 and step 8 as needed.
10If needed, press  repeatedly to return to the previous menus and make other setting selections.
11Press Start Color or Start Black.
 
20
Downloaded From ManualsPrinter.com Manuals