Home > Lexmark > Printer > Lexmark X264 Service Manual

Lexmark X264 Service Manual

Here you can view all the pages of manual Lexmark X264 Service Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 31

General information 1-11
7013-XXX
Fax specifications
Phone network connectivity
Fax resolutions
Miscellaneous FAX specifications
Phone networks types supportedPSTN or analog PABX (RJ-11)
ITU COMPATIBILITY   Standard Resolution   Fine   Superfine   Ultrafine   Coding
Group 3/ECM   8 x 3.85 pels/mm (200X100dpi) (204x98)   8 x 7.7 pels/mm (200X200dpi) (204x196)   11.8 x 11.8 pels/mm(300x300 dpi) (204x391)   15.7 x 15.7 pels/mm   (400x400 dpi) (408x391)   ITU T.4 and T.6(MH, MR, MMR, JPEG)
Modem speedV.34...

Page 32

1-12  Service Manual 7013-XXX
Tools 
The removal and adjustment procedures require the following tools and equipment:
•Spring hook
•Needle nose pliers
•Volt-ohmmeter 
•#1 and #2 Phillips screwdriver
•Slotted screwdriver
Acronyms
acAlternating Current 
ACMAutocompensator Mechanism (or paper feed)
ADFAutomatic document feeder
AFEAnalog front end
AIOAll-In-One
APSAutomatic Paper Size
ASICApplication Specific Integrated Circuit
BLDCBrushless DC Motor
BORBlack Only Retract
BUDBelt up down
CCyan...

Page 33

General information 1-13
7013-XXX
GBGigabyte
GFIGround Fault Interrupter
GHzGigahertz
HBPHost Based Printing 
HCFHigh-capacity feeder
HCITHigh-capacity Input Tray
HCOFHigh-Capacity Output Finisher
HCPFHigh-capacity feeder
HTMLHypertext markup language
HVHigh Voltage
HVPS High voltage power supply
HVUHigh voltage unit 
HzHertz
INTLInternational
ITCInternal Tray Card
ITUImage Transfer Unit
KBlack (Key)
LANLocal area network
LASER Light amplification by stimulated emission of radiation
LCD   Liquid crystal...

Page 34

1-14  Service Manual 7013-XXX
PIXEL Picture element
PJLPrinter Job Language
PORPower-on reset
POST Power-on self test
PPDS Personal Printer Data Stream 
ppmPages per minute
PQETPrint Quality Enhancement Technology
PRCPeoples Republic of China 
PSCParallel Synchronous Communications
PSDPosition Sensing Device
PSOParticipating Standards Organization
PWMPulse Width Modulation
RAMRandom access memory
RFIDRadio frequency identification
RHRelative humidity
RIPRaster image processor
ROMRead-only memory...

Page 35

Diagnostics information 2-1
7013-XXX
2.  Diagnostics information
Start
CAUTION: Unplug power from the printer before connecting or disconnecting any cable, 
assembly, or electronic card. This is a precaution for personal safety and to prevent damage to the 
printer. 
This chapter contains the codes and diagnostic tools to aid in providing corrective action for a malfunctioning 
printer. To determine the corrective action to repair a printer, look for the following information:
•A description of a...

Page 36

2-2  Service Manual 7013-XXX
Overview of the operator panel and menus
Understanding the operator panel
The printer operator panel has a four-line, back lit, grayscale display that can show both graphics and text. The 
Mode selection, job setup, Back, and Menu buttons are located to the left of the display, the navigation buttons 
are located below the display, and the start buttons, stop button, and numeric pad are located to the right of the 
display. In addition, there is a USB jack that enables...

Page 37

Diagnostics information 2-3
7013-XXX
6
Stop/Cancel buttonStops/cancels all printer activity
7Redial/Pause button• Press once to cause a two- or three-second dial pause 
in a fax number.
• Press to redial a fax number
8KeypadEnters numbers, letters, or symbols on the LCD display
9Front USB portScans to a flash drive or prints supported file types
Note: 
• The front USB port is not available on all models.
• When a USB flash memory device is inserted into the 
printer, the printer can only scan to the USB...

Page 38

2-4  Service Manual 7013-XXX
16
Select buttonAccepts menu selections and settings
17Left arrow buttonScrolls to the left on the display screen
18Indicator lightIndicates printer status:
• Off: the printer is off
• Blinking green: the printer is warming up, processing 
data, or printing
• Solid green: the printer is on, but idle
• Blinking red: operator intervention is needed
19Back buttonReturns one screen at a time to the Ready screen
Note: If a flash drive is connected and the USB menu is 
displayed,...

Page 39

Diagnostics information 2-5
7013-XXX
Diagram of the printer menus
Not all menus or selections will be available on all models or in all situations. These are accessed through the 
driver.
Paper Menu
Paper Source
Paper Size
Paper Type
Custom Types
Universal Setup
Substitute Size
Paper Texture
Paper Weight
Paper Loading
PostScript Menu
Print PS Error
USB Menu
Standard USB
Finishing Menu
Duplex
Duplex Bind
Copies
Blank Pages
Collation
Separator Sheets
Separator Source
Multipage Print
Multipage Order...

Page 40

2-6  Service Manual 7013-XXX
Messages and error codes
User attendance messages
The printer control panel displays messages describing the current state of the printer and indicates possible 
printer problems that must be resolved. This topic provides a list of all printer messages, explains what they 
mean, and tells how to clear the messages.
The following table lists the messages in alphanumerical order. A message can also be located using the index.
User status and attendance messages 
User primary...
Start reading Lexmark X264 Service Manual

Related Manuals for Lexmark X264 Service Manual

All Lexmark manuals