Lexmark E260dn User Manual

Menu itemDescription
Transparency Texture
Smooth
Normal
RoughSpecifies the relative texture of the transparencies loaded in a specific tray
Note: Normal is the factory default setting.
Recycled Texture
Smooth
Normal
RoughSpecifies the relative texture of the recycled paper loaded in a specific tray
Note: Normal is the factory default setting.
Labels Texture
Smooth
Normal
RoughSpecifies the relative texture of the labels loaded in a specific tray
Note: Normal is the factory default setting.
Bond Texture...

Menu itemDescription
Rough/Cotton Texture
RoughSpecifies the relative texture of the paper loaded in a specific tray
Note: Rough is the factory default setting.
Custom  Texture
Smooth
Normal
RoughSpecifies the relative texture of the custom paper loaded in a specific tray
Notes:
Normal is the factory default setting.
Settings appear only if the custom type is supported.
Paper Weight menu
Menu itemDescription
Select Type
Plain Weight
Card Stock Weight
Transparency Weight
Recycled Weight
Labels Weight
Bond...

Paper Loading menu
Menu itemDescription
Select Type
Recycled Loading
Bond Loading
Letterhead loading
Preprinted Loading
Colored Loading
Light Loading
Heavy Loading
Custom LoadingSpecifies the paper type
Note: After you select the type of paper, the Set Loading menu
appears.
Set Loading
Off
Duplex
Specifies whether duplex (2-sided) printing is turned on
Note: Off is the factory default setting.
Custom Types menu
Menu itemDescription
Custom Type 
Paper
Card Stock
Transparency
Rough/Cotton
Labels...

Universal Setup menu
These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user-defined paper size. It is listed with the other paper size settings and includes similar options, such
as support for duplex printing and printing multiple pages on one sheet.
Menu itemDescription
Units of Measure
Inches
MillimetersIdentifies the units of measure
Notes:
Inches is the US factory default setting.
Millimeters is the international...

Settings menu
General Settings menu
Menu itemDescription
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi
Russian
Polski
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSets the language of the text appearing on the display
Note: All languages may not be available for all printers.
Eco-Mode
Off
Energy
Paper
Energy/PaperNote: Off is the factory default setting.
Quiet Mode
Off
OnNote: Off is the factory default setting.
Run...

Menu itemDescription
Timeouts
Power Saver
Disabled
1–240Sets the amount of time in minutes the printer waits after a job is
printed before it goes into a reduced power state
Note: Disabled does not appear unless Energy Conserve is Off.
Timeouts
Print Timeout
Disabled
1–255Sets the amount of time in seconds the printer waits to receive an
end-of-job message before canceling the remainder of the print job
Notes:
90 seconds is the factory default setting.
When the timer expires, any partially printed page...

Menu itemDescription
Factory Defaults
Do Not Restore
Restore NowReturns the printer settings to the factory default settings
Notes:
Do Not Restore is the factory default setting. Do Not Restore
keeps the user-defined settings.
Restore Now returns all printer settings to the factory default
settings except those in the Network/Ports menu. All
downloads stored in RAM are deleted. Downloads stored in
flash memory are not affected.
Setup menu
Menu itemDescription
Printer Language
PCL Emulation
PS...

Menu itemDescription
Resource Save
Off
OnSpecifies how the printer handles temporary downloads, such as
fonts and macros stored in RAM, when the printer receives a job
that requires more memory than is available
Notes:
Off is the factory default setting. Off sets the printer to retain
the downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
The On setting retains the downloads during language changes
and printer resets. If the printer runs out of memory,
downloads...

Menu itemDescription
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)Stacks the pages of a print job in sequence when printing multiple copies
Notes:
Off is the factory default setting.
The On setting stacks the print job sequentially.
Both settings print the entire job the number of times specified by the Copies
menu setting.
Separator Sheets
None
Between Copies
Between Jobs
Between PagesSpecifies whether blank separator sheets are inserted
Notes:
None is the factory default setting.
Between Copies inserts a...

Menu itemDescription
N-up Border
None
SolidPrints a border around each page image when using N-up (pages-sides)
Note: None is the factory default setting.
Quality menu
Menu itemDescription
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image QSpecifies the printed output resolution
Note: 600 dpi is the factory default setting. The printer driver default is 2400 Image Q.
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both Directions
IsolatedEnhances the printed quality of small fonts and...