Lexmark C935dtn User Manual

7Open the lower staple drawer.
8Remove the staple cartridge identified on the display.
9Remove the jammed staples, and then place the staple cartridge into the stapler.
Clearing jams71
Downloaded From ManualsPrinter.com Manuals 

10Close the staple drawer.
11Close Door G.
12Press . Clearing jams72
Downloaded From ManualsPrinter.com Manuals 

Understanding printer menus
Menus list
Menu
Supplies Menu
Paper Menu
Reports
A number of menus are available to make it easy for you to change printer settings:
Supplies Menu Paper Menu Reports Settings
Cyan Toner
Magenta Toner
Yellow Toner
Black Toner
Color PC Units
Black PC Unit
Waste Toner Box
Staples G5
Staples G11
Staples G12
Hole Punch BoxDefault Source
Paper Size/Type
Configure MP
Substitute Size
Paper Texture
Paper Loading
Custom Types
Universal Setup
Bin SetupMenu Settings Page
Device...

Supplies menu
Menu itemDescription
Cyan, Magenta, Yellow, or Black Toner
Low
Replace
Missing or Defective
OK
UnsupportedShows the status of the toner cartridges
Color PC Units
Life Warning
Replace
Missing
OK
NormalShows the status of the cyan, yellow, and magenta
photoconductor units
Black PC Unit
Life Warning
Replace
Missing
OK
NormalShows the status of the black photoconductor unit
Waste Toner Box
Near Full
Replace
Missing
OKShows the status of the waste toner bottle
Staples G5, Staples G11, or Staples...

Paper menu
Default Source menu
Menu itemDescription
Default Source
Tray 
MP Feeder
Manual Paper
Manual EnvSets a default paper source for all print jobs
Notes:
From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder to appear as a menu setting.
Tray 1 (standard tray) is the factory default setting.
Only an installed paper source will appear as a menu setting.
A paper source selected by a print job will override the Default Source
setting for the duration of the print job.
If the...

Menu itemDescription
MP Feeder Size
11 x 17
A3
A4
A5
Executive
Folio
JIS B4
JIS B5
Legal
Letter
Statement
Universal
7 3/4 Envelope
10 Envelope
DL Envelope
C5 Envelope
B5 EnvelopeSpecifies the paper size loaded in the multipurpose feeder
Notes:
From the Paper menu, Configure MP must be set to Cassette in order
for MP Feeder to appear as a menu setting.
Letter is the US factory default setting. A4 is the international factory
default setting.
The multipurpose feeder does not automatically sense paper size....

Menu itemDescription
Manual Paper Type
Plain Paper
Card Stock
Transparency
Glossy
Labels
Bond
Letterhead
Preprinted
Colored Paper
Custom Type Specifies the type of paper being manually loaded
Note: Plain Paper is the factory default setting.
Manual Envelope Size
7 3/4 Envelope
10 Envelope
C5 Envelope
B5 Envelope
DL EnvelopeSpecifies the size of the envelope being manually loaded
Note: 10 Envelope is the US factory default setting. DL Envelope is the
international factory default setting.
Manual Envelope...

Substitute Size menu
Menu itemDescription
Substitute Size
Off
Statement/A5
Letter/A4
11 x 17/A3
All ListedSubstitutes a specified paper size if the requested paper size is not available
Notes:
All Listed is the factory default setting. All available substitutions are
allowed.
The Off setting indicates no size substitutions are allowed.
Setting a substitution lets the job print without a Change Paper message
appearing.
Paper Texture menu
Menu itemDescription
Plain Texture
Smooth
Normal
RoughSpecifies the...

Menu itemDescription
Letterhead Texture
Smooth
Normal
RoughSpecifies the relative texture of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Preprinted Texture
Smooth
Normal
RoughSpecifies the relative texture of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Colored Texture
Smooth
Normal
RoughSpecifies the relative texture of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Custom  Texture
Smooth
Normal...

Menu itemDescription
Colored Loading
Duplex
OffDetermines whether 2‑sided printing occurs for all jobs that specify
Colored as the paper type
Note: Off is the factory default setting.
Glossy Loading
Duplex
OffDetermines whether 2‑sided printing occurs for all jobs that Glossy as
the paper type
Note: Off is the factory default setting.
Custom  Loading
Duplex
OffDetermines whether 2‑sided printing occurs for all jobs that specify
Custom  as the paper type
Notes:
Off is the factory default setting.
Custom...