Lexmark C935dtn User Manual

Menu itemDescription
Scale
1–400%Scales the default font for HTML documents
Notes:
100% is the factory default setting.
Scaling can be increased in 1% increments.
Orientation
Portrait
LandscapeSets the page orientation for HTML documents
Note: Portrait is the factory default setting.
Margin Size
8–255 mmSets the page margin for HTML documents
Notes:
19 mm is the factory default setting.
Margin size can be increased in 1‑mm increments.
Backgrounds
Do Not Print
PrintSpecifies whether to print backgrounds...

Security menu
Menu itemDescription
Max Invalid PIN
Off
2–10Limits the number of times an invalid PIN can be entered
Notes:
Off is the factory default setting.
This menu item appears only if a printer hard disk is installed.
Once the limit is reached, the confidential print jobs for that user name are
deleted.
Job Expiration
Off
1 hour
4 hours
24 hours
1 weekLimits the amount of time a confidential job stays in the printer before it is deleted
Note: Off is the factory default setting.
Network/Ports menu...

Menu itemDescription
TCP/IP
Enable DHCP
On
Off
Enable RARP
On
Off
Enable BOOTP
On
Off
AutoIP
On
Off
Enable FTP/TFTP
On
Off
HTTP Server Enabled
On
OffLets you view or change the setting
Note: On is the factory default setting.
TCP/IP
WINS Server Address
DNS Server AddressLets you view or change the setting
Note: This is a four‑field IP address.
IPv6 menu
Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or...

Menu itemDescription
IPv6
Enable DHCPv6
Off
OnEnables DHCPv6 in the printer
Note: Off is the factory default setting.
Wireless menu
Use the following menu items to view or configure the wireless internal print server settings.
Note: This menu is available only for network models or printers attached to print servers when an optional wireless
internal print server is installed in the printer.
Menu itemDescription
Mode
Infrastructure
Ad hocLets you select a mode
Notes:
Infrastructure mode makes the printer...

Menu itemDescription
NPA Mode
Off
AutoSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
Changing this setting from the control panel and then exiting the menus
causes the printer to restart. The menu selection is updated.
Network Buffer
Auto
3k to Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in 1k...

Standard USB and USB  menus
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if the PS
Smartswitch setting is On. It uses the default printer language specified in the...

Menu itemDescription
Job Buffering
On
Off
AutoTemporarily stores jobs on the printer hard disk before printing
Notes:
Off is the factory default setting.
The On setting buffers jobs on the printer hard disk.
The Auto setting buffers print jobs only if the printer is busy processing data
from another input port.
Changing this setting from the control panel and then exiting the menus causes
the printer to restart. The menu selection is updated.
Mac Binary PS
On
Off
AutoSets the printer to process Macintosh...

Menu itemDescription
PS SmartSwitch
On
OffSets the printer to automatically switch to PS emulation when a print job received
through a serial port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PCL emulation if PCL
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PCL SmartSwitch is set to...

Menu itemDescription
Serial Protocol
DTR
DTR/DSR
XON/XOFF
XON/XOFF/DTR
XONXOFF/DTRDSRSelects the hardware and software handshaking settings for the serial port
Notes:
DTR is the factory default setting.
DTR/DSR is a hardware handshaking setting.
XON/XOFF is a software handshaking setting.
XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and
software handshaking settings.
Robust XON
On
OffDetermines whether or not the printer communicates availability to the computer
Notes:
Off is the factory...

NetWare menu
Menu itemDescription
View Login Name
Shows the assigned NetWare login name
View Print Mode
Shows the assigned NetWare print mode
View Network Number
Shows the assigned NetWare network number
Activate
On
OffActivates or deactivates NetWare support
Note: On is the factory default setting.
Ethernet 802.2
On
OffEnables the Ethernet 802.2 frame type setting
Note: On is the factory default setting.
Ethernet 802.3
On
OffEnables the Ethernet 802.3 frame type setting
Note: On is the factory default...