Lexmark C935dtn User Manual

When 88 Replace Cyan toner, 88 Replace Magenta toner, 88 Replace Yellow toner, or 88
Replace Black toner appears, you must replace the specified toner cartridge.
The recommended toner cartridges specifically designed for the printer are:
Part namePart number
Cyan High Yield Toner Cartridge C930H2CG
Magenta High Yield Toner Cartridge C930H2MG
Yellow High Yield Toner Cartridge C930H2YG
Black High Yield Toner Cartridge C930H2KG
Ordering photoconductors
When 84 Black pc unit life warning or 84 color pc unit...

Replacing supplies
Replacing the waste toner box
Replace the waste toner box when 82 Replace waste toner box appears. The printer will not continue printing
until the waste toner box is replaced.
1Waste toner box
2Door E6
3Door E
4Printhead lens cleaner
5E6 Door tab
Maintaining the printer132
Downloaded From ManualsPrinter.com Manuals 

1Unpack the replacement waste toner box and accessories.
2Open Door E (front printer door).
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more
than 10 minutes. Maintaining the printer133
Downloaded From ManualsPrinter.com Manuals 

3Grasp the E6 Door tab, and then push the door down.
4Remove the old printhead lens cleaner from Door E, and then discard it.
5Remove the waste toner box.
Maintaining the printer134
Downloaded From ManualsPrinter.com Manuals 

6Place the plastic cover over the waste toner box.
7Place the waste toner box in the recycling bag.
8Use the new printhead lens cleaner to clean the printhead lenses.
Maintaining the printer135
Downloaded From ManualsPrinter.com Manuals 

9Insert the new waste toner box.
10Place the new printhead lens cleaner in the notches of Door E.
11Close Door E6.
Maintaining the printer136
Downloaded From ManualsPrinter.com Manuals 

12Close Door E.
13Remove all paper from the printer paper path.
Visit www.lexmark.com/recycling to learn how to recycle the waste toner box.
Cleaning the printhead lenses
Clean the printhead lenses when you replace the waste toner box or when you encounter print quality problems.
1Waste toner box
2Door E6
3Door E (front door)
4Printhead lens cleaner
5E6 Door tab
Maintaining the printer137
Downloaded From ManualsPrinter.com Manuals 

1Open Door E (front door).
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more
than 10 minutes.
2Grasp the E6 Door tab, and then push the door down.
3Remove the waste toner box.
4Locate and remove the printhead lens cleaner from Door E.
Note: If you are replacing the waste toner box, use the printhead lens cleaner that shipped with it. Maintaining the printer138
Downloaded From ManualsPrinter.com Manuals 

5Insert the padded tip of the printhead lens cleaner into the first printhead lens opening.
6Push the printhead lens cleaner all the way to the back of the lens, and then pull it out.
7Clean the remaining three printhead lenses.
Maintaining the printer139
Downloaded From ManualsPrinter.com Manuals 

8Insert the waste toner box.
9Place the printhead lens cleaner in the notches of Door E.
10Close Door E6.
Maintaining the printer140
Downloaded From ManualsPrinter.com Manuals