Lexmark C935dtn User Manual

4Load the paper stack with the recommended print side faceup.
5Make sure the paper guides are secure against the edges of the paper.
6Insert the tray into the printer.
7If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting
for the tray from the control panel.
Using the multipurpose feeder
1Paper guides
2Size indicators
3Stack height limiter
Loading paper and specialty media31
Downloaded From ManualsPrinter.com Manuals 

1Pull the multipurpose feeder tray down.
2Grasp the extension, and gently pull it out until it is fully extended.
3Prepare the paper for loading.
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.
Note: Avoid touching the print side of the transparencies. Be careful not to scratch them.
Flex a stack of envelopes back...

4Load the paper, and then adjust the paper guides so that they lightly touch the edges of the paper stack.
Load letter, A4, and transparencies with the recommended print side facedown and the long edge of the paper
entering the printer first.
Load A3, A5, B4, folio, legal, and statement paper with the recommended print side facedown and the short
edge of the paper entering the printer first.
Notes:
–Adjust the additional paper guide to accommodate SRA3 and 12 x 19 paper sizes.
–Do not exceed the maximum...

Linking and unlinking trays
Linking trays
Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next
linked tray. When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked.
The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except the
multipurpose feeder. The Paper Size setting for the multipurpose feeder must be set manually from the Paper...

7Press  repeatedly until Custom Type  or another custom name appears, and then press .
Submitting selection appears, followed by Paper Menu.
8Verify that the correct Paper Type is associated with the custom name.
Note: Plain Paper is the factory default Paper Type associated with all Custom Type  names and user‑defined
custom names.
aFrom the Paper menu, press  repeatedly until Custom Types appears, and then press .
bPress  repeatedly until  appears next to the custom paper type name you selected in step...

Paper and specialty media guide
Paper guidelines
Paper characteristics
The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating
new paper stock.
Weight
The printer can automatically feed paper weights from 60 to 220 g/m2 (16 to 58 lb bond) grain long. Paper lighter than
60 g/m
2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75 g/m2 (20 lb
bond) grain long paper. For paper smaller than 182 x 257...

Fiber content
Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the
paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing
fibers such as cotton can negatively affect paper handling.
Unacceptable paper
The following paper types are not recommended for use with the printer:
Chemically treated papers used to make copies without carbon paper, also known as carbonless papers,...

Preprinted papers such as letterhead must be able to withstand temperatures up to 230°C (446°F) without melting or
releasing hazardous emissions.
Using recycled paper
As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for
use in laser (electrophotographic) printers. In 1998, Lexmark presented to the US government a study demonstrating
that recycled paper produced by major mills in the US fed as well as non-recycled paper. However, no blanket...

Loading letterhead in the 520‑sheet trays
Long‑edge orientation
Without finisherWith finisher installed
Short‑edge orientation
Without finisherWith finisher installed
Loading letterhead in the 867‑sheet tray
Without finisherWith finisher installed
Paper and specialty media guide39
Downloaded From ManualsPrinter.com Manuals 

Loading letterhead in the 1133‑sheet tray
Without finisherWith finisher installed
Using transparencies
Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
From MarkVision Professional, Print Properties, or the control panel, set the Paper Type to Transparency.
Feed transparencies from the standard tray or the multipurpose feeder.
Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to...