Lexmark C935dtn User Manual

–Have windows, holes, perforations, cutouts, or embossing
–Have metal clasps, string ties, or folding bars
–Have an interlocking design
–Have postage stamps attached
–Have any exposed adhesive when the flap is in the sealed or closed position
–Have bent corners
–Have rough, cockle, or laid finishes
Adjust the width guide to fit the width of the envelopes.
Note: A combination of high humidity (over 60%) and the high printing temperature may wrinkle or seal envelopes.
Using labels
Print samples on the...

Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or
other paper handling problems.
Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 230°C (446°F)
without releasing hazardous emissions.
Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting
introduces semi‑liquid and volatile components into the printer.
Use grain long card stock when possible....

Paper sizeDimensions520‑sheet trays
(standard or
optional)High capacity
feederMultipurpose
feederDuplex unit
Folio216 x 330 mm
(8.5 x 13 in.)
X
JIS B4257 x 364 mm
(10.1 x 14.3 in.)X
JIS B5182 x 257 mm
(7.2 x 10.1 in.)
Legal216 x 356 mm
(8.5 x 14 in.)X
Letter216 x 279 mm
(8.5 x 11 in.)
Statement1140 x 216 mm
(5.5 x 8.5 in.)XX
Tabloid279 x 432 mm
(11 x 17 in.)
X
Universal100 x 148 mm
(3.9 x 5.8 in.) up to
305 x 483 mm
(11.7 x 19 in.)
2
XX
7 3/4 Envelope
(Monarch)98 x 191 mm
(3.9 x 7.5 in.)XXX
B5...

Paper types and weights supported by the printer
The printer engine supports 60–220 g/m2 (16–60 lb) paper weights. The duplex unit supports 63–170 g/m2 (17–45 lb)
paper weights.
Paper type520‑sheet traysHigh capacity feederMultipurpose feederDuplex unit
Plain Paper
Bond
Letterhead
Preprinted
Colored Paper
Card stock
Glossy paper X XX
Paper labels
*XX
TransparenciesX
Envelopes X X
X
* Vinyl labels are not supported.
Paper types and weights supported by the finisher
Use this table to determine the possible...

Paper typeHorizontal transport
unit
(50 sheets)Finisher standard
bin (500 sheets)Bin 1 (1500/3000
sheets)*Bin 2
(300 sheets)
Glossy paper
XX
Labels
XX
Transparencies
XX
Envelopes
XX X
* Bin 1 of the booklet finisher supports 1500 sheets. Bin 1 of the standard finisher supports 3000 sheets.
Supported finishing features
1Horizontal transport unit
2Finisher standard bin
3Finisher bin 1
4Finisher bin 2 (booklet‑maker)
Notes:
The finisher shown above, is the booklet finisher. Bin 2 is available only when the...

Envelopes are routed here.
Universal paper is routed here when it is longer than 483 mm (19 in.) or shorter than 148 mm (5.8 in.).
Finisher standard bin
The paper capacity is 500 sheets.
Envelopes and executive‑size paper are not supported in this bin.
Finishing options are not supported in this bin.
Bin 1
The paper capacity is 3000 sheets when the standard finisher is installed.
The paper capacity is 1500 sheets when the booklet finisher is installed.
Bin 1 finishing features...

Bin 2 (booklet‑maker)
Bin 2 is available only when the booklet finisher is installed. The paper capacity of Bin 2 (booklet‑maker) is 300 sheets
or 20 sets of 15‑sheet booklets.
Bin 2 finishing features
SizeBi foldBooklet foldSaddle staple
A3
A4 (only SEF)
A5XXX
ExecutiveXXX
Folio
JIS B4
JIS B5XXX
Legal
Letter (only SEF)
Statement X X X
Tabloid
UniversalXXX
Envelopes (any size) X X X
SEF—The paper is loaded in the short edge orientation. The short edge of the paper enters the printer first.
Bi fold—Each...

Printing
This chapter covers printing, printer reports, and job cancellation. The selection and handling of paper and specialty
media can affect how reliably documents print. For more information, see Avoiding jams and Storing paper.
Installing printer software
A printer driver is software that lets the computer communicate with the printer. The printer software is typically
installed during the initial printer setup. For more information, see the Setup sheet or Setup Guide that shipped with
the printer...

Job typeDescription
Confidential When you send a Confidential print job to the printer, you must create a PIN in
Print Properties. The PIN must be four digits using the numbers 0–9. The job is held
in printer memory until you enter the PIN from the control panel and choose to
print or delete the job.
Repeat When you send a Repeat print job, the printer prints all requested copies of the
job and stores the job in memory so you can print additional copies later. You can
print additional copies as long as...

Printing confidential and other held jobs from a Macintosh computer
1With a document open, choose File > Print.
2From the Copies & Pages or General pop‑up menu, choose Job Routing.
aWhen using Mac OS 9 if Job Routing is not a choice from the pop‑up menu, choose Plug‑in Preferences >
Print Time Filters.
bTurn down the disclosure triangle to the left of Print Time Filters, and choose Job Routing.
3From the radio group, select your job type (Confidential, Reserve, Repeat, or Verify), and then assign a user...