Home > Lexmark > Printer > Lexmark C782n XL User Manual

Lexmark C782n XL User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lexmark C782n XL User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Conserving supplies
    61
    Maintaining the printer
    Conserving supplies
    Several settings in your application software or on the display let you conserve toner and paper. For more information on 
    changing these settings, see the Menus and Messages Guide.
    Ordering supplies
    To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark Authorized Supplies 
    Dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place 
    where you bought your printer.
    Note:All life estimates for printer supplies assume printing on letter or A4 size plain paper.
    Print cartridges
    The initial print cartridges that shipped with your printer will only operate in the printer those cartridges were shipped with. 
    Attempting to use these initial print cartridges in any other printer, even if it is the same model, may result in a cartridge 
    incompatibility failure message.
    When the 88.yy  cartridge low message appears or when you experience faded print, remove the print 
    cartridge. Firmly shake it side-to-side and front-to-back several times to redistribute the toner, then reinsert it and continue 
    printing. Repeat this procedure multiple times until the print remains faded. When the print remains faded replace the print 
    cartridge. Have a new cartridge available when the current one no longer prints satisfactorily.
    SupplyMenu selection itemWhat the setting does
    Toner Toner Darkness in the 
    Settings
    Æ Quality MenuLets you adjust the level of toner released on a sheet of print media. The 
    values range from 1 (lightest setting) to 5 (darkest setting).
    Color toner Color Saver in the Settings
    Æ 
    Quality MenuPrints colors less vividly to conserve your color toner.
    Print media Multipage Print in the 
    Settings
    Æ Finishing MenuCauses the printer to print two or more page images on one side of a 
    sheet. Values for Multipage Print are 2 Up, 3 Up, 4 Up, 6 Up, 9 Up, 12 
    Up, and 16 Up. Combined with the duplex setting, Multipage Print lets 
    you print up to 32 pages on one sheet of paper (16 images on the front 
    and 16 on the back).
    Duplex in the Settings
    Æ 
    Finishing MenuDuplex printing is available when you attach the optional duplex unit. It 
    lets you print on both sides of a sheet of paper.
    Use your software application 
    or printer driver to send a 
    Verify Print job.Lets you examine the first copy of a multiple-copy job to be sure it is 
    satisfactory before you print the other copies. If the job is unsatisfactory, 
    you can cancel the job.
    For more information about a Verify Print job, see Holding a job in the 
    printer.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Toner waste container
    62
    Maintaining the printer
    The following is a list of cartridges you can order:
    Toner waste container
    When an 82 Waste toner box nearly full message appears on the display, you should order a new toner waste 
    container. To order a new toner waste container, order part number 10B3100.
    Fuser and ITU
    Refer to the part number listed on the fuser or ITU for the appropriate reordering number for these items.
    Ordering a fuser
    Note:When the 87 Fuser Life Warning message appears on the display, you should order a new 
    fuser.Order the correct type of fuser for your printer. Only order a web oiler fuser if an authorized 
    servicer has installed a web oiler upgrade kit to allow your printer to print large quantities of vinyl or 
    dual web labels. C780 / C782 C782
    •Black print cartridge
    •Cyan print cartridge
    •Magenta print cartridge
    •Yellow print cartridge
    •Black high yield print cartridge
    •Cyan high yield print cartridge
    •Magenta high yield print cartridge
    •Yellow high yield print cartridge
    •Black Return Program print cartridge
    •Cyan Return Program print cartridge
    •Magenta Return Program print cartridge
    •Yellow Return Program print cartridge
    •Black high yield Return Program print cartridge
    •Cyan high yield Return Program print cartridge
    •Magenta high yield Return Program print cartridge
    •Yellow high yield Return Program print cartridge•Black high yield print cartridge
    •Cyan extra high yield print cartridge
    •Magenta extra high yield print cartridge
    •Yellow extra high yield print cartridge
    •Black extra high yield Return Program print 
    cartridge
    •Cyan extra high yield Return Program print 
    cartridge
    •Magenta extra high yield Return Program print 
    cartridge
    •Yellow extra high yield Return Program print 
    cartridge
    Type of fuserPrinter voltagePart number
    Standard fuser or 
    web oiler fuser100 V (Japan) 40X1667
    115 V 40X1651
    220 V 40X1666
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Recycling Lexmark products
    63
    Maintaining the printer
    Ordering an image transfer unit and transfer roller
    When the 83.yy ITU life warning message appears on the display, you should order a new image transfer unit. Use 
    part number 40X1680 to order an image transfer unit.
    For more information about warning messages, see the Menus and Messages Guide on the publications CD
    Ordering staple cartridges
    Staple cartridges hold 3,000 staples. Use part number 11K3188 to order a pack of three staple cartridges.
    Recycling Lexmark products
    To return Lexmark products to Lexmark for recycling:
    1Visit our Web site:
    www.lexmark.com/recycle
    2Follow the instructions on the computer screen.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing paper jams
    64
    5Clearing paper jams
    Identifying jams
    If the printer jams, the appropriate jam message will be displayed on the printer operator panel. If you select Show areas 
    on the operator panel, you can view one or more images to help you clear the jam.
    See the diagram on page 65 for an overview of the paper path and areas where jams may occur. The path varies 
    depending on the paper source and output bins.
    23.13 Paper jam, 
    2 pages jammed
    Continue
    Show areas
    1. Open 
    manual feed 
    door.
    Show areas
    Show duplex
    Show rear door
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Access doors and trays
    65
    Clearing paper jams
    Access doors and trays
    The following illustrations show areas where jams can occur.   
    Area A
    Multipurpose feeder
    250.yy Paper Jam
    Area B
    Left access door 
    (beside tray 1)
    200.yy Paper Jam
    24.yy Paper Jam
    Area C
    Paper input options:
    500-sheet drawer or 
    2000-sheet drawer
    24.yy Paper Jam
    Area D
    Front access door
    201.yy Paper Jam
    Area T1
    Standard tray (Tray 1)
    200.yy Paper Jam
    241.yy Paper Jam
    Area E
    Duplex mechanism
    230.yy Paper Jam
    Area T
    Paper input options:
    500-sheet trays or 
    2000-sheet tray
    24.yy Paper JamArea M
    Mailbox
    27.yy Paper Jam
    Area L
    Upper right access door
    (redrive area)
    201.yy Paper Jam
    202.yy Paper Jam
    Area K
    Lower right access door
    (fuser area)
    201.yy Paper Jam
    202.yy Paper Jam
    Area J
    Duplex tray
    230.yy Paper Jam
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Understanding jam messages
    66
    Clearing paper jams
    Understanding jam messages
    Note:Always clear the entire paper path when you receive any jam message.
    Paper jam messages
    MessageCheck AreasWhat to do
    200.yy Paper Jam
    (tray 1 and left access 
    door beside tray 1)B, T1 Follow the instructions for clearing Area B, and Area T1.
    If the jam message persists, paper may be caught in the image 
    transfer unit. For instructions, see Clearing image transfer unit jams.
    201.yy Paper Jam
    (fuser area)D, K, L Follow the instructions for clearing Area D, Area K, and Area L.
    If the jam message persists, paper may be caught in the fuser. For 
    instructions, see Clearing fuser jams.
    202.yy Paper Jam
    (fuser area)K, L Follow the instructions for clearing Area K and Area L.
    If the jam message persists, paper may be caught in the fuser. For 
    instructions, see Clearing fuser jams.
    230.yy Paper Jam
    (duplex area)E, J Follow the instructions for clearing Area E and Area J.
    24.yy Paper Jam
    (trays 1–4)B,C, T Follow the instructions for clearingArea B, Area C and Area T.
    250 Paper Jam
    (multipurpose feeder)A,D Follow the instructions for clearing Area A and Area D.
    27.yy Paper Jam
    (mailbox and output 
    expander)M Follow the instructions for Clearing mailbox, finisher, or output 
    expander jams (Area M).
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing the entire paper path
    67
    Clearing paper jams
    Clearing the entire paper path
    When a paper jam occurs, the printer stops operating and displays 2.yy Paper Jam and a message to clear certain 
    printer areas.
    After you have cleared the following areas, make sure all printer covers, doors, and trays are closed, and then press Go to 
    resume printing.
    Note:The printer also displays  Pages Jammed. Be sure to remove all the jammed pages before 
    pressing Go.
    Area A
    1If you are using the multipurpose feeder, 
    release the levers on each side of the feeder to 
    lay it flat.
    2Press the pick assembly release lever and 
    remove all media and jams.
    3Return the feeder to its working position and 
    reload your media.
    Area B
    1Open the left access door until it latches open.
    2Remove all visible media.
    Note:Remove any torn media from the 
    printer.
    3Close the door.
    Note:Open Tray 1 and make sure the 
    entire media stack is pushed all 
    the way down into the tray.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing the entire paper path
    68
    Clearing paper jams
    Area C
    1If you have one or more optional 500-sheet 
    drawers:
    aOpen the 500-sheet drawer access door. 
    Hold the door down while removing jams.
    Note:Make sure the entire paper stack 
    is loaded correctly and pushed all 
    the way down into the tray.
    bClose the door.
    2If you have an optional 2000-sheet drawer:
    aOpen the 2000-sheet drawer access door. 
    Pull the jam down and out of the rollers.
    bClose the door.
    Area D
    1Open the front access door.
    2Hold down the front access door. Remove jams 
    in the rollers under the image transfer unit.
    Note:Any image printed will not be fused 
    to the page.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing the entire paper path
    69
    Clearing paper jams
    Area T1
    1If clearing Area B did not clear the jam, then carefully open tray 1. Remove any jams.
    Note:Make sure the paper is pushed all the way down into the tray.
    2Close tray 1.
    Area E
    1Pull the duplex tray E completely out. Look 
    inside and remove any paper caught in the 
    rollers. Also, look up inside, as some jams may 
    be above the rollers.
    2Reinstall the duplex mechanism in the printer.
    Area T
    1If you cannot clear all the 500-sheet drawer jams from Area C:
    aCarefully open trays 2 through 4 (all 500-sheet trays) and remove jams.
    Note:Make sure the paper is pushed all the way down into the tray.
    bClose trays 2 through 4.
    2If you cannot clear the 2000-sheet drawer jam 
    from Area C:
    aOpen the 2000-sheet drawer.
    bRemove any jams, and then close the 
    2000-sheet drawer.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing the entire paper path
    70
    Clearing paper jams
    Area J
    1Remove the duplex tray J.
    2Remove any jams, and then reinstall the tray.
    Area K
    1Open the lower right access door.
    2Remove any jams, and then close the door.
    Area L
    1Open the upper right access door.
    2Remove jams from the rollers, and then close 
    the door.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Lexmark manuals Comments (0)

    Related Manuals for Lexmark C782n XL User Manual