Lexmark C782n XL User Manual

							Notices
101
8Notices
Cautions and warnings
Note:A note identifies something that could help you.
CAUTION:A caution identifies something that could cause you harm.
Warning:A warning identifies something that could damage your product hardware or software
.
Electronic emission notices
With a network cable or high-capacity output finisher installed
Federal Communications Commission (FCC) compliance information statement
The Lexmark C780, C780n, C782, C782n, types 5061-200, 5061-210, 5061-400, and 5061-410, have been tested and found to comply with 
the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation.
The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by 
unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the users authority to operate 
this equipment.
To assure compliance with FCC regulations on electromagnetic interference for a Class A computing device, use a properly shielded and 
grounded cable such as Lexmark part number 1021231 for parallel attach or 1021294 for USB attach. Use of a substitute cable not properly 
shielded and grounded may result in a violation of FCC regulations.
Industry Canada compliance statement
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.
Avis de conformité aux normes de l’industrie du Canada 
Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des 
interférences NMB-003.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation 
and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed 
for use within certain voltage limits. 
A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, 
Lexmark International, S.A., Boigny, France.
This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.
Downloaded From ManualsPrinter.com Manuals 
						

							Notices
102
Notices
Radio interference notice
Warning:When a network cable is attached, this is a Class A product. In a domestic environment, this product may cause radio 
interference, in which case, the user may be required to take adequate measures.
Taiwan BSMI notice
Japanese VCCI notice
Korean MIC statement
Downloaded From ManualsPrinter.com Manuals 
						

							Notices
103
Notices
Without a network cable or high-capacity output finisher installed
Federal Communications Commission (FCC) compliance information statement
The Lexmark C780, C780n, C782, and C782n, types 5061-200, 5061-210, 5061-400, and 5061-410, has been tested and found to 
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult your point of purchase or service representative for additional suggestions.
The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by 
unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the users authority to 
operate this equipment.
Note:
Any questions regarding this compliance information statement should be directed to:  
Industry Canada compliance statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.
Avis de conformité aux normes de l’industrie du Canada
Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer 
des interférences NMB-003.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the 
approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical 
equipment designed for use within certain voltage limits.
A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical 
Support, Lexmark International, S.A., Boigny, France.
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
Japanese VCCI notice
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY   40550
(859) 232-3000
Downloaded From ManualsPrinter.com Manuals 
						

							Notices
104
Notices
Korean MIC statement
Noise emission levels
Hinweis zum GS-Zeichen 
Die folgenden Messungen wurden gemäß ISO 7779 durchgeführt und gemäß ISO 9296 gemeldet.
German GS mark notice
Modell: Lexmark C780, C780n, C782, C782n
Gerätetyp: 5061-200, 5061-210, 5061-400, and 5061-410
Postanschrift
Lexmark Deutschland GmbH
Postfach 1560 
63115 Dietzenbach
Adresse
Lexmark Deutschland GmbH
Max-Planck-Straße 12
63128 Dietzenbach
Telefon: 0180 - 564 56 44 (Produktinformationen)
Telefon: 
01805 - 00 01 15 (Technischer Kundendienst)
E-Mail: [email protected]
Durchschnittlicher Schallpegel (dB(A)) in 1 m Umkrei
Drucken 52 dBA
Leerlauf 30 dBA
Machine type: 5061-200, 5061-210, 5061-400, 5061-410
Mailing address
Lexmark Deutschland GmbH
Postfach 1560 
Downloaded From ManualsPrinter.com Manuals 
						

							Notices
105
Notices
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Product energy consumption
The following table documents the power consumption characteristics of the product.
Power Saver
As part of the ENERGY STAR program, this product is designed with an energy-saving mode called Power Saver. The Power Saver 
Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended 
periods of inactivity.
 The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called 
the Power Saver Timeout. 
By using the configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power 
Saver Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Power 
Saver Timeout to a high value maintains a fast response, but uses more energy.
Total energy usage
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of 
Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. 
The total product energy usage is the sum of each modes energy usage.63115 Dietzenbach
Physical address
Lexmark Deutschland GmbH
Max-Planck-Straße 12
63128 Dietzenbach
Phone: 0180 - 564 56 44 
(Produktinformationen)
Telefon: 01805 - 00 01 15 (Technischer Kundendienst)
E-mail: [email protected]
1-meter average sound pressure, dBA 
Printing 52 dBA
Idling 30 dBA
ModeDescriptionPower consumption
Printing The product is generating hard-
copy output from electronic inputs.650 W
Ready The product is waiting for a print 
job.190 W
Power Saver The product is in energy-saving 
mode.25 W
Off The product is plugged into a wall 
outlet, but the switch is turned off.150 mW
Downloaded From ManualsPrinter.com Manuals 
						

							Notices
106
Notices
Waste from Electrical and Electronic Equipment (WEEE) 
directive
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We 
encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at 
www.lexmark.com for your local sales office phone number.
Downloaded From ManualsPrinter.com Manuals 
						

							Notices
107
Notices
China RoHS
ENERGY STAR
Laser advisory label
A laser notice label may be affixed to this printer.
LUOKAN 1 LASERLAITE
VAROITUS! Laitteen käyttäminen muulla kuin tässä käyttoohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 
ylittävälle  näkymättömälle lasersäteilylle.
KLASS 1 LASER APPARAT
VARNING! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan avnändaren utsättas för osynlig 
laserstrålning, som överskrider gränsen för laserklass 1.
Part NameHazardous Substances or Elements
Lead (Pb) Mercury 
(Hg)Cadmium 
(Cd)Hexavalent 
Chromium 
(CrVI)Polybrominated 
biphenyl (PBB)Polybrominated 
diphenylether 
(PBDE)
Circuit boards X O O O O O
Power supply X O O O O O
Metal shaftsXOOOOO
Metal rollers X O O O O O
Motors X O O O O O
O: Indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is 
below the concentration limit requirement as described in SJ/T11363-2006.
X: Indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the part 
exceeds the concentration limit requirement as described in SJ/T11363-2006.
This product is compliant with the European Union Directive 2002/95/EC concerning the restriction of use of certain 
hazardous substances.
C780n/C780dn/C780dtn
C782dn/C782dtn
Downloaded From ManualsPrinter.com Manuals 
						

							Notices
108
Notices
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and 
elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 5 
milliwatt gallium arsenide laser operating in the wavelength region of 770-795 nanometers. The laser system and printer are designed 
so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed 
service condition.
Statement of Limited Warranty
C780, C780n, C782, C782n printer
Lexmark International, Inc. Lexington, KY
This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country-specific warranty 
information that came with your product.
This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a 
Lexmark Remarketer, referred to in this statement as “Remarketer.”
Limited warranty
Lexmark warrants that this product:
Is manufactured from new parts, or new and serviceable used parts, which perform like new parts
Is, during normal use, free from defects in material and workmanship
If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement 
(at Lexmarks option).
If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was 
intended. To obtain warranty service, you may be required to present the feature or option with the product.
If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder 
of the warranty period. You should transfer proof of original purchase and this statement to that user.
Limited warranty service
The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that 
the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, 
are substantially used up, depleted, or consumed. Fuser Units, Image Transfer Units, Waste Toner Bottles, and Paper Feed items, 
and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or 
“Scheduled Maintenance” message for such item.
To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to 
the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss 
of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.
When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or 
Lexmark. The replacement may be a new or repaired item.
The replacement item assumes the remaining warranty period of the original product.
Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in 
warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.
Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless 
directed otherwise by Lexmark).
For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the 
World Wide Web at http://support.lexmark.com.
Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark 
warranty, technical support may not be available or only be available for a fee.
Extent of limited warranty
Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any 
product.
Warranty service does not include repair of failures caused by:
Modification or unauthorized attachments
Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance
Unsuitable physical or operating environment
Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
Operation of a product beyond the limit of its duty cycle
Use of printing media outside of Lexmark specifications
Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
Downloaded From ManualsPrinter.com Manuals 
						

							Notices
109
Notices
Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark
TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR 
REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH 
RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF 
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT 
MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO 
WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, 
AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.
Limitation of liability
Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance 
of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in 
the following paragraph.
Lexmarks liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused 
the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal 
property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, 
INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a 
Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.
This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmarks and its Suppliers and 
Remarketers limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.
Additional rights
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or 
consequential damages, so the limitations or exclusions contained above may not apply to you.
This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.
Downloaded From ManualsPrinter.com Manuals 
						

							110
 Index
Numerics
5-bin mailbox 13
A
access doors 65
adjusting
Power Saver 80
areas
Area A 67
Area B 67
Area C 68
Area E 69
Area G 68
Area J 70
Area K 70
Area L 70
Area M 71
Area T 69
Area T1 69
attaching
option cards 20
print server 20
auto size sensing 40
disabling 85
special sizes 85
automatic tray linking 40
avoiding paper jams 47
B
Back button 27
bins
linking 41
button
back 27
menu 27
stop 27
C
card stock guidelines 53
characteristics, media 48
letterhead 50
confidential jobs
entering user name 42
sending 42
D
disabling operator panel menus 78disabling size sensing 85
display panel 28
E
Embedded Web Server 81
enabling operator panel menus 79
envelope sizes
7 3/4 (Monarch) 55
F
firmware card
installing 17
flash memory 22
removing 22
G
guidelines
media 48
printing letterhead 51
H
hard disk 23
Held jobs 41
held jobs
entering user name 42
overview 42
types of 42
I
image transfer unit
ordering 63
installing
Coax/Twinax Adapter 20
firmware card 17
hard disk with adapter card 20
installing
MarkNet print server 20
internal print server 20
option cards 20
Parallel Interface Card 20
print servers 20
USB/Parallel Interface Card 20
internal print server
See print server
Internet Protocol Security 82
Downloaded From ManualsPrinter.com Manuals