Lexmark C734dtn User Manual

8After selecting your job type, use the keypad to enter your PIN.
If you enter an invalid PIN, the Invalid PIN screen appears.
To re‑enter the PIN, make sure Try again appears, and then press .
To cancel the PIN, press the up or down arrow button until Cancel appears, and then press .
9Press the up or down arrow button until  appears next to the job you want to print, and then press .
10Press the up or down arrow button until  appears next to the number of copies you want to print, and then press
.
Note:...

3Press the up or down arrow button until  appears next to the document you want to print, and then press .
Note: Folders found on the flash drive appear as folders. File names are appended by the extension type (for
example, .jpg).
4Press  to print one copy, or enter the number of copies using the keypad, and then press  to initiate the print
job.
Note: Do not remove the flash drive from the printer until the document has finished printing.
If you leave the flash drive in the printer after leaving the...

4Press the up or down arrow button until Print Fonts appears, and then press .
5Press the up or down arrow button until  appears next to PCL Fonts, PostScript Fonts, or PPDS
Fonts, and then press 
.
After the font sample list prints, Ready appears.
Printing a directory list
A directory list shows the resources stored in flash memory or on the hard disk.
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the up or down arrow button until Reports appears, and...

Canceling a print job from the computer
For Windows users
1Open the printers folder:
aClick , or click Start and then click Run.
bIn the Start Search or Run box, type control printers.
cPress Enter, or click OK.
The printers folder opens.
2Double‑click the printer icon.
3Select the job to cancel.
4From the keyboard, press Delete.
From the Windows taskbar:
When you send a job to print, a small printer icon appears in the right corner of the taskbar.
1Double‑click the printer icon.
A list of print jobs...

Printing in black and white
To print all text and graphics using only the black toner cartridge, set the printer to Black Only.
Note: The printer driver is capable of overriding this setting.
1From the printer control panel, press .
2Press the up or down arrow button until Settings appears, and then press .
3Press the up or down arrow button until Quality Menu appears, and then press .
4Press the up or down arrow button until Print Mode appears, and then press .
5Press the up or down arrow button until...

Understanding printer menus
Menus list
Supplies Paper Menu Reports Settings
Replace Supply
Cyan Cartridge
Magenta Cartridge
Yellow Cartridge
Black Cartridge
Cyan Photoconductor
Magenta Photoconductor
Yellow Photoconductor
Black Photoconductor
Waste Toner Box
Fuser
Transfer ModuleDefault Source
Paper Size/Type
Configure MP
Substitute Size
Paper Texture
Paper Weight
Paper Loading
Custom Types
Universal SetupMenu Settings Page
Device Statistics
Network Setup Page
Network  Setup Page
Profiles List
NetWare...

Supplies menu
Supplies menu
Menu itemDescription
Replace Supply
All
Cyan Photoconductor
Magenta Photoconductor
Yellow Photoconductor
Black PhotoconductorProvides the option to reset the supply counter for the
photoconductor just replaced, or for all photoconductors
Select the photoconductor, and then select Yes or No:
Select Yes to reset the supply counter.
Select No to exit.
Note: A supply counter must be reset manually after a
photoconductor is replaced.
Cyan, Magenta, Yellow, or Black Cartridge
Early...

Paper menu
Default Source menu
Menu itemDescription
Default Source
Tray 
MP Feeder
Manual Paper
Manual EnvSets a default paper source for all print jobs
Notes:
From the Paper menu, Configure MP must be set to Cassette for MP
Feeder to appear as a menu setting.
Tray 1 (standard tray) is the factory default setting.
If the same size and type of paper are in two trays and the Paper Size and
Paper Type settings match, then the trays are automatically linked. When
one tray is empty, the job prints using the...

Menu itemDescription
Tray  Type
Plain Paper
Card Stock
Transparency
Glossy
Heavy Glossy
Labels
Vinyl Labels
Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton
Recycled
Custom Type Specifies the type of paper loaded in each tray
Notes:
Plain Paper is the factory default setting for Tray 1. Custom Type  is
the factory default setting for all other trays.
If available, a user‑defined name will appear instead of Custom
Type .
Use this menu item to configure automatic tray linking....

Menu itemDescription
MP Feeder Type
Plain Paper
Card Stock
Transparency
Glossy
Heavy Glossy
Labels
Vinyl Labels
Bond
Envelope
Rough Envelope
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton
Recycled
Custom Type Specifies the type of paper loaded in the multipurpose feeder
Notes:
From the Paper menu, Configure MP must be set to Cassette for MP
Feeder Type to appear as a menu item.
Plain paper is the factory default setting.
Manual Paper Size
A4
A5
A6
JIS B5
Letter
Legal
Executive...