Home > Lexmark > Printer > Lexmark C734dtn User Manual

Lexmark C734dtn User Manual

Here you can view all the pages of manual Lexmark C734dtn User Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 101

Menu itemDescription
NPA Mode
On
Off
AutoSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
When the On setting is used, the printer performs NPA processing. If the data
is not in NPA format, it is rejected as bad data.
When the Off setting is used, the printer does not perform NPA processing.
When the Auto setting is used, the printer examines data, determines the...

Page 102

Menu itemDescription
Robust XON
On
OffDetermines whether or not the printer communicates availability to the computer
Notes:
Off is the factory default setting.
This menu item applies only to the serial port if Serial Protocol is set to
XON/XOFF.
Baud
1200
2400
4800
9600
19200
38400
57600
115200
138200
172800
230400
345600Specifies the rate at which data can be received through the serial port
Notes:
9600 is the factory default setting.
138200, 172800, 230400, and 345600 baud rates are only displayed in...

Page 103

Menu itemDescription
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway PortSpecifies SMTP server port information
Note: 25 is the default SMTP gateway port. Range is 1‑65536.
SMTP Timeout
5–30Specifies the amount of time in seconds before the server stops trying to
send the e‑mail
Note: 30 seconds is the factory default setting.
Reply AddressSpecifies a reply address of up to 128 characters in e-mail sent by the
printer
Use SSL
Disabled
Negotiate
RequiredSets...

Page 104

Security menu
Miscellaneous menu
Menu itemDescription
Login Restriction
Login failures
1-10 (3 attempts)
Failure time frame
1-60 (5 minutes)
Lockout time
1-60 (5 minutes)
Panel Login Timeout
1-900 (3 seconds)
Remote Login Timeout
1-120 (10 minutes)Limits the number and time frames of failed login attempts from the printer control
panel before all users are locked out
Notes:
“Login failures” specifies the number of failed login attempts before users are
locked out. 3 attempts is the factory default...

Page 105

Disk Wiping menu
Menu itemDescription
Wiping Mode
Off
Auto
ManualDisk Wiping erases only print job data that is not currently in use by the file system
from the printer hard disk. All permanent data on the printer hard disk is preserved,
such as downloaded fonts, macros, and held jobs.
Notes:
This menu item appears only if a formatted, non-defective printer hard disk is
installed.
Off is the factory default setting.
Due to the large amount of resources required for Automatic Wiping,
activating this...

Page 106

Menu itemDescription
Manual Method
Single pass
Multiple passDisk Wiping erases only print job data that is not currently in use by the file system
from the printer hard disk. All permanent data on the printer hard disk is preserved,
such as downloaded fonts, macros, and held jobs.
Both manual and scheduled wiping allow the file system to reuse marked disk space
without first having to wipe it.
Notes:
This menu item appears only if a formatted, non-defective printer hard disk is
installed.
Single pass is...

Page 107

Menu itemDescription
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
Yes
No
Remote Syslog Facility
0‑23
Severity of events to log
0‑7Specifies whether and how the audit logs are created
Notes:
Enable audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
Enable remote syslog determines if logs are being sent to a remote server. No
is the factory default setting.
Remote syslog facility determines the value used to send logs to the...

Page 108

Settings menu
General Settings menu
Menu itemDescription
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi
Russian
Polski
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSets the language of the text appearing on the display
Note: All languages may not be available for all printers.
Eco-Mode
Off
Energy
Energy/Paper
PaperMinimizes the use of energy, paper, or specialty media
Notes:
Off is the factory default setting. Off...

Page 109

Menu itemDescription
Quiet Mode
Off (Image/Photo)
On (Text/Graphics)Reduces the amount of noise produced by the printer
Notes:
Off is the factory default setting. This setting supports the
performance specifications for your printer.
On configures the printer to produce as little noise as
possible. This setting is best suited for printing text and line
graphics.
For optimal printing of color‑rich documents, set Quiet Mode
to Off.
Selecting Photo from the driver may disable Quiet Mode and
provide better...

Page 110

Menu itemDescription
Timeouts
Power Saver
1–240Sets the amount of time the printer waits after a job is printed
before it goes into a reduced power state
Notes:
30 minutes is the factory default setting.
Lower settings conserve more energy, but may require
longer warm‑up times.
Select the lowest setting if the printer shares an electrical
circuit with room lighting or you notice lights flickering in the
room.
Select a high setting if the printer is in constant use. Under
most circumstances, this keeps...
Start reading Lexmark C734dtn User Manual

Related Manuals for Lexmark C734dtn User Manual

All Lexmark manuals