Lexmark C734dtn User Manual

Menu itemDescription
Print Recovery
Jam Recovery
On
Off
AutoSpecifies whether the printer reprints jammed pages
Notes:
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
On sets the printer to always reprint jammed pages.
Off sets the printer to never reprint jammed pages.
Print Recovery
Page Protect
Off
OnLets the printer successfully print a page that may not have printed
otherwise
Notes:
Off is the...

Setup menu
Menu itemDescription
Printer Language
PCL Emulation
PS EmulationSets the default printer language
Notes:
PCL emulation uses a PCL interpreter for processing print
jobs. PostScript emulation uses a PS interpreter for
processing print jobs.
PCL is the factory default printer language.
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Job Waiting
On
OffSpecifies that print jobs be removed from the print queue...

Menu itemDescription
Download Target
RAM
Flash
DiskSets the storage location for downloads
Notes:
RAM is the factory default setting.
Storing downloads in flash memory or on a printer hard disk
places them in permanent storage. Downloads remain in
flash memory or on the printer hard disk even when the
printer is turned off.
Storing downloads in RAM is temporary.
This menu appears only if a flash and/or disk option is
installed.
Job Accounting
Off
OnSpecifies whether the printer stores statistical...

Finishing menu
Menu itemDescription
Sides (Duplex)
1 sided
2 sidedSpecifies whether duplex (2‑sided) printing is set as the default for all print jobs
Notes:
1 sided is the factory default setting.
To set 2‑sided printing from the software program: for Windows users, click
File > Print, and then click Properties, Preferences, Options, or Setup; for
Macintosh users, choose File > Print, and then adjust the settings from the
print dialog and pop‑up menus.
Duplex Binding
Long Edge
Short EdgeDefines the way...

Menu itemDescription
Separator Source
Tray 
Multi‑Purpose FeederSpecifies the paper source for separator sheets
Notes:
Tray 1 (standard tray) is the factory default setting.
From the Paper menu, Configure MP must be set to Cassette for
Multi‑Purpose Feeder to appear as a menu setting.
N‑up (pages‑side)
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑UpSpecifies that multiple‑page images be printed on one side of a sheet of paper.
Notes:
Off is the factory default setting.
The number selected is the number of page...

Menu itemDescription
Color Correction
Auto
Off
ManualAdjusts the color output on the printed page
Notes:
Auto is the factory default setting. Auto applies different color conversion tables
to each object on the printed page.
Off turns off color correction.
Manual allows customization of the color tables using the settings available from
the Manual Color menu.
Due to the differences in additive and subtractive colors, certain colors that
appear on computer monitors are impossible to duplicate on the...