Land Rover Freelander 2002my Electrical Library 3rd Edition Rover Manual

DESCRIPTION AND OPERATION
4.20FREELANDER 02MY
SUNROOF
DESCRIPTION
General
An electrically operated sunroof is fitted to 5 door vehicles only. The sunroof will only operate 
when the ignition switch is in the ignition position, and is controlled via a non-latching rocker 
switch mounted on the centre console. 
When the upper half of the switch is pressed and held, the sunroof will move to its tilt 
position. When the lower half of the switch is pressed and held, the sunroof will return to its 
closed...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.21
Close
When the top half of the sunroof switch is depressed (with the sunroof in the fully open 
position), a feed is provided to the sunroof motor (C0614) from the switch (C0363) on an S 
wire. Current flows across the motor (C0614) and back to the switch (C0363) on a G wire. 
The switch (C0363) is earthed on a B wire. The motor will now power the sunroof back to 
the fully closed position.
Tilt
When the top half of the sunroof switch is depressed (with the...

DESCRIPTION AND OPERATION
4.22FREELANDER 02MY
DOOR MIRRORS
DESCRIPTION
General
The electrically operated door mirrors are controlled via the multi-directional switch mounted 
on the fascia adjacent the instrument pack. Rotating the switch to the left, allows movement 
of the LH door mirror. A movement in the switch position will now be replicated by the LH 
door mirror. Rotating the switch to the right allows movement of the RH door mirror in the 
same way. The central switch position inhibits operation...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.23
Left
When the door mirror switch is moved to the left, it provides a feed to the LH horizontal mirror 
(C0319) on an SW wire. Current flows across the motor (C0319) and back to the switch 
(C0066) on a BN then BU wire. The switch (C0066) provides the motor an earth path on a 
B wire. The motor will move the mirror left until the switch is released, or it reaches the end 
of its travel.
Right
When the door mirror switch is moved to the right, it provides a...

DESCRIPTION AND OPERATION
4.24FREELANDER 02MY
Right
When the door mirror switch is moved to the right, it provides a feed to the RH horizontal 
mirror (C0319) on a BN wire. Current flows across the motor (C0319) and back to the switch 
(C0066) on an SW wire. The switch (C0066) provides the motor an earth path on a B wire. 
The motor will move the mirror right until the switch is released, or it reaches the end of its 
travel.
NOTE: Both the LH and RH door mirror motors have the same connector number as...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.25
FOLDING DOOR MIRRORS
DESCRIPTION
General
Certain markets are fitted with folding door mirrors. When the centre of the multi-directional 
mirror switch is pressed, both door mirrors move to the folded position simultaneously. 
Pressing the switch a second time returns the mirrors to their original position. 
For more information on door mirror operation, refer to the  Door Mirrors  section of this 
manual.
 
+  DOOR MIRRORS. 
OPERATION
General
Feed from the...

DESCRIPTION AND OPERATION
4.26FREELANDER 02MY
HEATED SEATS
DESCRIPTION
General
The heated front seats are switched on and off by pressing either of the switches mounted 
on the centre console. The heated front seats are operated independently of each other. The 
switches also incorporate an illumination LED to show when the seat heaters are switched 
on.
OPERATION
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and fusible link 
4 of the engine compartment fuse box...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.27
RH Seat
When the RH heated seat switch is pressed, current flows across the switch contacts 
(C0250) to the RH heated seat relay (C1221) on a UK then R wire. Operation of the heated 
seat relay (C1221) is controlled by the temperature sensor on a G wire. The temperature 
sensor is a normally closed switch. Current flows across the switch to earth on a G then N 
then B wire.
When the temperature of the seat is within acceptable levels, the heated seat relay...

DESCRIPTION AND OPERATION
4.28FREELANDER 02MY
DIAGNOSTIC SOCKET
DESCRIPTION
General
The diagnostic socket is located behind the centre console, and is accessible from the 
drivers footwell on NAS vehicles, or the passenger footwell on all other vehicle derivatives. 
The socket is compliant with SAE directive J1962 standard, and allows attachment of 
TestBook, T4, or any other suitable diagnostic software tool. It allows detailed fault diagnosis 
checks to be carried out on the vehicle via an ISO 9141 K...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.29
CENTRAL CONTROL UNIT (CCU)
DESCRIPTION
General
For a full description of the CCU, refer to the  Control Units  section of the System 
Description and Operation Workshop manual.
OPERATION
General
For a full description of CCU operation, refer to the  Control Units  section of the System 
Description and Operation Workshop manual.