Land Rover Freelander 2002my Electrical Library 3rd Edition Rover Manual

DESCRIPTION AND OPERATION
4.10FREELANDER 02MY
Starter Relay
If the vehicle has been successfully re-mobilised, the immobilisation ECU (C0059) provides 
a feed to the starter relay coil (C0576) on an RW wire. The relay coil (C0576) is earthed on 
a B wire. The energised relay allows a feed from fusible link 7 to flow across the relay switch 
contacts (C0572) to the starter motor (C0179) on an NR wire (NR then B on Td4 vehicles). 
For more details of starter motor operation, refer to the  Charging and...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.11
WINDOWS
DESCRIPTION
Door Windows
The front and rear electrically operated windows are opened and closed by using the 
appropriate non-latching switch mounted on the centre console. Rear window switches (if 
fitted) are also located on the rear door trim casings. Rear window operation can be 
controlled by the driver by pressing the rear window inhibit switch, which is also mounted on 
the centre console.
The window lift system is controlled by the window...

DESCRIPTION AND OPERATION
4.12FREELANDER 02MY
Tail Door Window Calibration
When the CCU is changed from transit mode to a valid market mode, and after the vehicle 
battery has been disconnected, the tail door window must be calibrated to provide the CCU 
with a window position datum. When the CCU mode is changed to a valid market, or the 
battery reconnected, the CCU automatically begins the calibration process by energising the 
down contacts in the window lift relay module until the window lift motor...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.13
OPERATION
Front Door Windows
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and fusible link 
4 of the engine compartment fuse box (C0632) on an R wire. Fusible link 4 (C0574) provides 
a constant battery feed to the window lift relay (C0587) on an NW wire. Fusible link 4 
(C0574) also provides a constant battery feed to the Central Control Unit (CCU) (C0592) on 
an NW wire. The CCU is mounted directly onto the rear of...

DESCRIPTION AND OPERATION
4.14FREELANDER 02MY
Driver Door Window – RHD Vehicles
Fuse 34 of the passenger compartment fuse box (C0586) provides a feed to the driver door 
window switch (C0242) and the window lift ECU (C0341) on SO wires. The window lift ECU 
(C0341) is earthed on a B wire.
When the driver door window switch is pressed to lower the window, current flows across 
the switch (C0242) to the window lift ECU (C0341) on an OG wire. The window lift ECU 
(C0341) now provides a feed to the driver...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.15
Front Passenger Door Window – RHD Vehicles
Fuse 33 of the passenger compartment fuse box (C0586) provides a feed to the front 
passenger door window switch (C0321) on an RG wire. 
When the passenger door window switch is pressed to lower the window, current flows 
across the switch (C0321) to the passenger door window lift motor (C0326) on an R then 
OR wire. Current flows across the motor (C0326) and back to the passenger door window 
switch (C0321) on an...

DESCRIPTION AND OPERATION
4.16FREELANDER 02MY
LH Rear Window
Fuse 26 of the passenger compartment fuse box (C0585) provides a feed to the console 
mounted LH rear window switch (C0264) on a WK wire. 
When the LH rear console switch is pressed to lower the window, current flows across the 
switch (C0264) to the door mounted switch (C0732) on a GR then WR wire. The door 
mounted switch (C0732) now provides a feed to the window lift motor (C0304) on an R wire. 
Current flows across the motor (C0304) and...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.17
The console mounted switch (C0263) is earthed on a B wire. The window will now move 
upwards until the switch is released.
NOTE: Both rear door window lift motors, and both rear door mounted switches have the 
same connector numbers as they utilise the same harness.
Tail Door Window 
General
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and fusible link 
4 of the engine compartment fuse box (C0632) on an R wire. Fusible link 4...

DESCRIPTION AND OPERATION
4.18FREELANDER 02MY
Roof On Switch (3 Door Vehicles Only)
The roof on switch (C0497) is located on the RH D post, and is provided a constant battery 
feed by fuse 14 of the passenger compartment fuse box (C0583) on a P wire. The roof on 
switch is closed when the hard back is fitted, or the soft back is in the fitted position. In this 
instance current flows across the switch (C0497) to the CCU (C0428) on a PY wire.
If the hard back is removed (or the soft back is folded down)...

DESCRIPTION AND OPERATION
FREELANDER 02MY 4.19
Tail Door Open Switch
The CCU (C0428) monitors the condition of the tail door exterior handle by providing a feed 
to the tail door open switch (C0615) on an N wire. When the tail door handle is operated, 
current flows across the switch (C0615) to earth on a B wire. When the CCU registers this 
earth, it delays opening the tail door and lowers the tail door window approximately 17 mm. 
The CCU (C0428) also monitors the condition of the tail door barrel...