Home > Land Rover > Automobile > Land Rover Body And Paint Air Bag And Safety Belt Rover Manual

Land Rover Body And Paint Air Bag And Safety Belt Rover Manual

Here you can view all the pages of manual Land Rover Body And Paint Air Bag And Safety Belt Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.

Page 21

•RH side impact.
•Roll-over.
The front impact thresholds increase in severity from
pretensioners, through to driver and passenger air bag
stage 2, belt fastened.
Firing Strategies
The seat belt pretensioners are fired when either the
pretensioner impact limit or the roll-over limit is
exceeded. The restraints control module only fires the
pretensioners if the related safety belt is fastened. For
the front passenger pretensioner to fire, the seat must
also be occupied by a large person, i.e. someone over...

Page 22

•Activates all of the courtesy lamps, except for the
approach lamps. The activated courtesy lamps
remain on until they are manually switched off
at the lamp unit, or the CJB crash mode is
cancelled, when they return to normal operation.
•Activates the hazard warning lamps. The hazard
warning lamps remain on until cancelled by
turning the ignition switch from position II to
position I or 0, or until the crash mode is
cancelled.
The crash mode is cancelled by cycling the ignition
switch.
Air Bag and Safety...

Page 23

SRS CONTROL DIAGRAM - SHEET 1 OF 2 (ALL EXCEPT NAS)
NOTE: A = Hardwired connections; D = High speed CAN bus
(G421346) Technical Training276
Lesson 3 – Body and PaintAir Bag and Safety Belt Pretensioner
Supplemental Restraint System (SRS) 

Page 24

Fusible link 11E, battery junction box1
Battery2
Left front impact sensor3
Right front impact sensor4
Left side impact sensor5
Right side impact sensor6
Passenger air bag deactivation switch7
Left safety belt buckle sensor8
Instrument cluster9
Right safety belt buckle sensor10
Occupant detection pressure sensor11
Seat position sensor12
Restraints Control Module13
Fuse 9P, central junction box14
Ignition switch15
Fuse 68P, central junction box16
Passenger air bag deactivation indicator17
Air Bag and...

Page 25

SRS CONTROL DIAGRAM - SHEET 1 OF 2 (NAS ONLY)
NOTE: A = Hardwired connections; D = High speed CAN bus
(G421346) Technical Training278
Lesson 3 – Body and PaintAir Bag and Safety Belt Pretensioner
Supplemental Restraint System (SRS) 

Page 26

Fusible link 11E, battery junction box1
Battery2
Left front impact sensor3
Right front impact sensor4
Left side impact sensor5
Right side impact sensor6
Left safety belt buckle switch7
Right safety belt buckle switch8
Instrument cluster9
Safety belt tension sensor10
Occupant classification module11
Pressure pad and sensor12
Seat position sensor13
Restraints Control Module14
Fuse 9P, central junction box15
Ignition switch16
Fuse 68P, central junction box17
Passenger air bag deactivation indicator18
Air...

Page 27

SRS CONTROL DIAGRAM - SHEET 2 OF 2 (ALL MARKETS)
NOTE: A = Hardwired connections
(G421346) Technical Training280
Lesson 3 – Body and PaintAir Bag and Safety Belt Pretensioner
Supplemental Restraint System (SRS) 

Page 28

Passenger air bag1
Driver air bag2
Clockspring3
ECM4
Diagnostic socket5
Left pretensioner6
Left side air bag7
Left third row side air curtain8
Left first and second row side air curtain9
Right third row side air curtain10
Right first and second row side air curtain11
Restraints Control Module12
Right side air bag13
Right pretensioner14
Air Bag and Safety Belt Pretensioner
Supplemental Restraint System (SRS)
Lesson 3 – Body and Paint
281Technical Training (G421346) 

Page 29

COMPONENT LOCATIONS
Evaporator1
Thermostatic expansion valve2
Connections for auxiliary climate control (where
fitted)
3
Low pressure line4
A/C compressor5
Condenser6
Receiver drier7
High pressure line8
Low pressure servicing connection9
Refrigerant pressure sensor (reference)10
High pressure servicing connection11
Air ConditioningLesson 2 – Electrical
13Technical Training (G421234) 

Page 30

GENERAL
The Air Conditioning (A/C) system transfers heat from
the vehicle interior to the outside atmosphere to provide
the heater assembly with dehumidified cool air. The
system consists of:
•A compressor.
•A condenser.
•A receiver drier.
•A thermostatic expansion valve.
•An evaporator.
•Low and high pressure refrigerant lines.
The system is a sealed, closed loop, filled with a charge
weight of R134a refrigerant as the heat transfer medium.
Oil is added to the refrigerant to lubricate the internal...
Start reading Land Rover Body And Paint Air Bag And Safety Belt Rover Manual

Related Manuals for Land Rover Body And Paint Air Bag And Safety Belt Rover Manual

All Land Rover manuals