Kyocera TASKalfa 550c User Manual

12
3
4
5
CD-ROM
CD-ROM
The software included in the Client Utilities CD-ROM is shown below.
9
The following pieces of client software are included in the Client Utilities CD-ROM.
Client software
For Windows Client Software Installer
PCL printer driver
PS3 printer driver
XPS printer driver
TWAIN driver
File downloader
N/W-Fax driver
AddressBook Viewer
Remote Scan driver
WIA driver
e-Filing Backup/Restore Utility
For MacintoshPPD file for Mac OS X 0.2. to Mac OS X 0.5.x
For...

Chapter 1 PREPARATIONS
Client Software
This product provides you with Client software for the printing, scanning e-Filing, network management and network fax 
functions.
0
For details, refer to the Software Installation Guide, Operator’s Manual for TWAIN Driver / File Downloader, e-Filing Guide and Operator’s Manual for Backup/Restore Utility.
For details, refer to the Software Installation Guide,
Operator’s Manual for Remote Scan Driver and Scanning Guide.
For details, refer to the Software...

12
3
4
5
Client Software

Client software for the network management
COMMAND CENTER COMMAND CENTER enables you to view the device information, monitor jobs, create templates and 
manage address book from your computers using a browser. The device can be set up and 
maintained with the administrator’s function from your computers using a browser.
Software for the network fax functions
N/W-Fax driverThe N/W-Fax driver enables you to send electronic documents as faxes or Internet faxes from your...

Chapter 1 PREPARATIONS
2
Front / Right side
9
8
7
21
10
4
5
3
6
13
11
12
1.  Reversing Automatic Document Feeder
The stack of originals is scanned one sheet at a time. Both 
sides of the originals can be scanned. A maximum of 00 
originals (80 g/m2 or 20 lb. Bond) (or stack height  mm 
or 0.2”) can be placed in one go. (The maximum number 
of sheets that can be set may vary depending on the 
media type of the originals.)
2.  Operator’s manual pocket (back side)
Keep the manual in...

12
3
4
5
Description of Each Component
3
Left side / Inner side
10
9
11
6
15141312
4
3
2
8
7
1
5
1.  Platen sheet
&P.0 “Regular Maintenance”
2.  Original glass
Use this to copy three-dimensional originals, book-type 
originals and special paper such as OHP film or tracing 
paper, as well as plain paper.
3.  Bridge unit
Open it when paper jams occur.
4.  Waste toner box
&P.5 “Replacing Waste Toner Box”
5.  USB port
Use this port when printing files stored in a USB device or 
storing scanned...

Chapter 1 PREPARATIONS
14
Configuration of options
34
2 1
1.  Saddle Stitch Finisher (DF-810)
This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. The Hole Punch Unit 
(optional, PH-6) can be installed in this Finisher.
2.  Finisher (DF-800)
This Finisher enables sort/group finishing and stapling. 
The Hole Punch Unit (optional, PH-6) can be installed in 
this Finisher.
3.  Hole Punch Unit (PH-6)
This unit enables you to punch holes on printed sheets.
4.  External...

12
3
4
5
Description of Each Component
5
IPSec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Finisher Guide Rail (AK-800)
This unit is used when the equipment is installed on soft surface 
flooring. This allows you to separate/install an optional finisher 
from/to the equipment easily.
Downloaded From ManualsPrinter.com Manuals 

Chapter 1 PREPARATIONS

Control panel
Use the buttons on the control panel for various operations and settings in the equipment.
231243
5
6
7
8
9
10
11
12
14
15
16
171819202122
13
1.  PRINT DATA lamp
This lamp lights during reception of data such as print 
data.
2.  ALARM lamp
This lamp lights when an error occurs and the equipment 
needs some actions to be taken.
3.  MAIN POWER lamp
This lamp lights when the main power switch of this 
equipment is ON.
4.  ON/OFF lamp
This lamp lights when the...

12
3
4
5
Description of Each Component
7
17.  [ACCESS] button
Use this button when the department code or user 
information has been set. If this button is pressed after 
copying, etc., the next user cannot use functions such as 
copying without keying in the department code or user 
information. Refer to the MFP Management Guide for the 
department and user management.
18.  [CLEAR] button
Use this button to correct the numbers keyed in, such as 
the number of copy sets.
19.  Digital keys
Use these...

Chapter 1 PREPARATIONS
8
Adjustment of the height and angle of the control panel
Adjusting the height of the control panel
The height of the control panel is adjustable for your convenience.
Adjustment of the angle of the control panel
The control panel is adjustable at any angle, right or left, up or down.
Downloaded From ManualsPrinter.com Manuals