Home > Kyocera > Printer > Kyocera TASKalfa 181 User Manual

Kyocera TASKalfa 181 User Manual

Here you can view all the pages of manual Kyocera TASKalfa 181 User Manual. The Kyocera manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 51

Basic Operation
3-10
Combined Copying
Two or four originals are reduced and copied onto a 
single sheet. Also, borderlines of each original can be 
marked with solid or dotted lines.
NoteBoth the original size and the copy paper size must be standard size.
The following modes are available for combine copying.
OriginalCopy
2
112
Mode Description
2-in-1 Use this mode to copy two originals onto one sheet.
4-in-1
(horizontal)
4-in-1  
(vertical) Use this mode to copy four originals onto one sheet.
Original...

Page 52

Basic Operation3-11
2-in-1
The orientations of the originals and the finished copy are shown below.
Using the platen:
Using the document processor:
Copy
Original Copy
Original
Copy
Original Copy
Original
Downloaded From ManualsPrinter.com Manuals 

Page 53

Basic Operation
3-12
4-in-1 (horizontal)
The orientations of the originals and the finished copy are shown below.
Using the platen:
Using the document processor:
Copy
Original Copy
Original
Copy
Original Copy
Original
Downloaded From ManualsPrinter.com Manuals 

Page 54

Basic Operation3-13
4-in-1 (vertical)
The orientations of the originals and the finished copy are shown below.
Using the platen:
Using the document processor:
Copy
Original Copy
Original
Copy
Original Copy
Original
Downloaded From ManualsPrinter.com Manuals 

Page 55

Basic Operation
3-14
Interrupt Mode
The interrupt mode temporarily stops the output of 
copy jobs, etc. and allows the output of urgent copy-, 
print- or received fax data. After the urgent interrupt job 
is finished, the interrupted job will be automatically 
resumed.
The following modes are available for the interrupt mode:
Interrupting Copying
1During a copy job press the  Interrupt key.
Interrupt mode  is displayed.
2Remove the originals of the ongoing copy job.
3Set the original for interrupt...

Page 56

Basic Operation3-15
Interrupting Printing
1Press the Interrupt key during a print job. Select Interrupt mode  is displayed.
NoteIf the machine has neither print data nor received fax data, Interrupt mode OK  Interrupt 
mode is displayed. Proceed to step 4.
2The example at the right shows the machine has both 
printing data (2) and received FAX data (3) queued 
inside. Press the  S key or the  T key to select from the 
following options:
• To make copying by interrupting the ongoing print  job or FAX...

Page 57

Basic Operation
3-16
Low Power Mode
Pressing the Energy Saver  key puts the machine into a resting state (low power mode) even when 
the main power switch is on. Only the  Energy Saver indicator, Power indicator, and main power 
indicator will light up and the other indicators will go out on the operation panel.
Press the  Energy Saver  key again to resume copying operations. The recovery time before copies 
can be made is 10 seconds.
NoteIf the machine detects print data or received fax data in the low...

Page 58

Basic Operation3-17
Sleep Mode
Pressing the  Power key puts the machine into a resting state (sleep mode) even when the main 
power switch is on. Only the main power indicator lights up and all other indicators are turned off on 
the operation panel. Consumed power in this mode is still less than in the low power mode.
Press the  Power key again to resume copying operations. The recovery time before copies can be 
made is 17.2 seconds.
NoteIf the machine detects print data or received fax data in the...

Page 59

Basic Operation
3-18
Basic Printing Procedure
Make sure that the machine’s printer or network cable and the power cord are properly connected 
before using this machine as a printer.
Installing the Printer Driver
To print a document from a Windows software, you must first install the printer driver software for the 
machine, which is contained in the CD-ROM supplied.  For information on how to install the printer 
driver software, refer to the  KX Printer Driver Operation Guide  in the CD-ROM.
Printing...

Page 60

4-1
4 Optional Equipment
The following options are available for this machine.
• Document Processor
• Paper Feeder
• Duplex Unit
• Finisher
• Job Separator
• Key Counter
•Fax Kit
• Network Scanner Kit
• Network Interface Card (IB-23)
• Additional Memory
Document Processor
This equipment automatically feeds and scans multiple-sheet originals one by one. Two-sided 
originals are automatically turned over  so that both sides can be scanned.
Acceptable Originals
• Sheet originals only
• Paper weight...
Start reading Kyocera TASKalfa 181 User Manual

Related Manuals for Kyocera TASKalfa 181 User Manual

All Kyocera manuals