Kyocera TASKalfa 181 User Manual

OPERATION GUIDE
F S -11 0 0
F S -13 0 0 D
870CKGB20008
*870CKGB20008*
TASKalfa 181/221
Downloaded From ManualsPrinter.com Manuals 

Introduction
Thank you for your purchase of Taskalfa 181/221.
This Operation Guide is intended to help you operate the machine correctly, perform routine 
maintenance and take a simple troubleshooting ac tion as necessary, so that you can always use 
the machine in good condition. Please read this Operation Guide before you start using the 
machine, and keep it close to the machine for  easy reference. We recommend the use of our 
own brand supplies. We will not be liable for  any damage caused by the...

i
CONTENTS
1 Names of Parts ............................................................................................... 1-1
Main Body  ..................................................................................................................... ...........1-1
Operation Panel  ............................................................................................................... ........1-4
2 Preparations ...............................................................

ii
Fax Kit  ................................................................................................................................... 4-10
Network Scanner Kit  ...... ........................................................ ............................................. ... 4-10
Network Interface Card (IB-23) ........................... ................................................................... 4-10
Additional Memory  .....................

iii
NoticeThe information in this guide is subject to change without notification. Additional pages may be 
inserted in future editions. The user is asked to excuse any technical inaccuracies or 
typographical errors in the present edition.
No responsibility is assumed if accidents occur while the user is following the instructions in this 
guide. No responsibility is assumed for defects in  the printer’s firmware (contents of its read-only 
memory).
This guide, any copyrightable subject matter sold or...

iv
Energy Saving Contol Function
The device comes equipped with a Low Power Mode where energy consumption is reduced 
after a certain amount of time elapses since the device was last used, as well as a  Sleep Mode 
where printer and fax functions remain in a wait ing state but power consumption is still reduced 
to a minimum when there is no activity with the dev ice within a set amount of time. If the auto low 
power time is equal to the auto sleep time, a Sleep Mode is proceded.
Low Power Mode
The...

v
Please read this Operation Guide before using this machine. Keep it close to the machine for easy reference.
Please read this Operation Guide before using this machine. Keep it close to the machine 
for easy reference.
The sections of this guide and parts of the ma chine marked with symbols are safety warnings 
meant to protect the user, other individuals and surrounding objects, and ensure correct and 
safe usage of the machine. The symbols and their meanings are indicated below.
Symbols
The   symbol...

vi
The z symbol indicates that the related section in cludes information on actions which must be 
performed. Specifics of the required ac tion are indicated inside the symbol. 
Please contact your service representative to order  a replacement if the safety warnings in this 
Operation Guide are illegible  or if the guide itself is missing. (fee required)
.... [Alert of required action]
.... [Remove the power plug from the outlet]
.... [Always connect the machine to an outlet with a ground connection]...

vii
IMPORTANT! PLEASE READ FIRST.
CAUTION LABELS
Caution labels have been attached to the machine at the following locations for safety purposes. 
Be sufficiently careful to avoid fire or electric shock when removing a paper jam or when 
replacing toner.
NOTE: Do not remove these labels.
Label 2
High temperature inside. Do not touch 
parts in this area, because there is a 
danger of getting burned.Label 3
Do not attempt to incinerate the 
toner container. Dangerous sparks 
may cause burns.
Label 1
High...

viii
INSTALLATION PRECAUTIONS
Environment
Caution
Avoid placing the machine on or in locations which are unstable or not level. Such 
locations may cause the machine to fall down or fall over. This type of situation 
presents a danger of personal injury or damage to the machine.
Avoid locations with humidity or dust and di rt. If dust or dirt become attached to the 
power plug, clean the plug to avoid the danger of fire or electrical shock.
Avoid locations near radiators, heaters, or  other heat sources,...