Kyocera KM C3232 User Manual

Preparation for Usage
2-45
NOTE: For Address of Address Book installed PC, enter the address of the computer on which 
Scanner File Utility is installed. 
For Save Number, enter the file save folder number you entered in the No. column in Step 5 of 
Registering File Save Folders on page2-41. 
6Click the Registration button. 
NOTE: Be sure to click the Registration button. Settings are not saved if you change screens or 
close the browser window without pressing Registration. 
After the above settings...

Preparation for Usage
2-46
Downloaded From ManualsPrinter.com Manuals 

3-1
3 Basic Operation
This chapter explains the following operations.
• Basic Copying Procedures...3-2
• Selecting Image Quality...3-5
• Adjusting Exposure...3-6
• Reducing/Enlarging...3-7
• Duplex Mode...3-11
• Split Mode...3-14
• Sort Mode...3-16
• Interrupt Copy...3-17
• Job Reservation...3-18
• Canceling a Print Job...3-19
• Scanner Operation...3-20
• Low-Power Mode...3-35
• Sleep Mode...3-36
Downloaded From ManualsPrinter.com Manuals 

Basic Operation
3-2
Basic Copying Procedures
Follow the steps as below for basic copying.
1Open the main power switch cover and move the main 
power switch to on ( | position).
After warm-up is complete, the Start key’s Start 
indicator will glow green. 
2Press the Copier key. 
3Place the original. 
NOTE: Refer to Placing Originals on page2-16 for 
original placement instructions. 
4Press the Auto Color, Full Color or Black&White key 
to select a color mode. 
Color Mode Description
Auto color mode...

Basic Operation
3-3
5Confirm that [APS] is selected. In this 
mode, paper that matches the size of the 
originals will be selected automatically. 
To change the paper size, press the 
desired paper size to select the paper 
source.
6Use the numeric keys to enter the copy quantity. You 
can specify up to 999 copies.
7Press the Start key. 
NOTE: Adjust the angle of the operation panel by 
pulling the operation panel lower lever. 
8Remove the finished copies from the output tray. 
The output tray can hold...

Basic Operation
3-4
Turning off the main power switch
Press the Power key on the operation panel, and after 
verifying the Power indicator has gone off, switch off 
the main power switch. Switching off the main power 
switch before pressing the Power key may cause 
damage to the internal hard disk.
If the optional fax kit is installed, when the main power 
switch is off ({ position), fax send/receive is disabled. 
To turn the power off, press the Power key on the 
operation panel.
Downloaded From...

Basic Operation
3-5
Selecting Image Quality
Choose the image quality suited to the type of original.
1Place the original. 
2Press [Function]. 
3Press [Orig. Image Quality] ([Image 
Quality]). 
4Select the image quality. 
5Press the Start key. Copying begins.  Image Quality Description
Text+Photo Appropriate for mixed text and photo originals. 
Photo  Appropriate for photo originals taken with a camera. 
Print  Appropriate for photo originals from magazines or printed media. 
Text  Appropriate for...

Basic Operation
3-6
Adjusting Exposure
Adjust the exposure automatically or manually. The default setting is [Manual]. Follow the steps as 
below for Manual mode. 
1Place the original. 
2Press the exposure adjustment key 
( / ) to adjust the exposure level. 
Press [Auto Exposure] to use Auto 
Exposure mode. The machine 
determines a suitable exposure level for 
copying. To change the exposure mode 
from [Auto] to [Manual], press the 
exposure adjustment key ( / ).
NOTE: Auto Exposure mode is only...

Basic Operation
3-7
Reducing/Enlarging
Adjust the magnification to reduce or enlarge the original image.
The following zoom modes are available.
• Auto Zoom – Automatically reduces or enlarges the original image suited to the selected paper 
size.
• Manual Zoom – Reduces or enlarges the original image in 1 % increments between 25 - 400 %. 
• Preset Zoom – Reduces or enlarges at preset magnifications.
• XY Zoom – Independently adjust vertical and horizontal magnifications. Set zoom size in 1 % 
increments...

Basic Operation
3-8
Manual Zoom
Reduces or enlarges the original image in 1 % 
increments between 25 - 400 %. 
Follow the steps as below to use manual zoom.
1Place the original and press 
[Reduce/Enlarge]. 
2Press [+] and [–] to set the displayed 
magnification. 
Press [# keys] ([#-Keys]) to enter with 
numeric keys. 
3Press the Start key. Copying begins. 
25 %
400 %
11×8Paper  Si ze
Col or  func. Function User choice
Ba si c 11×8½
Pl ai n
11×17
Co l o r
11×8½
Pl ai n
11×8½
Pl ai nMP  tr a y
Pl ai n...