Kyocera KM C3232 User Manual

Preparation for Usage
2-5
NOTE: Before loading the paper, be sure that it is not 
curled or folded. Curled or folded paper may cause 
paper jams. 
Ensure that the loaded paper does not exceed the 
level indicated.
3Gently push the cassette back in.
Loading Paper in the MP Tray
In addition to standard and recycled paper, special paper (60 - 220 g/m2) may be loaded. 100 sheets 
of 11 × 8
1/2 or A4 or smaller size paper (80 g/m2) or 50 sheets of 81/2× 14 or B4 or larger paper 
(80 g/m2) may be loaded....

Preparation for Usage
2-6
2Adjust the sliders to fit the width of the paper. 
3Insert the paper along the sliders into the tray until it 
stops. 
Ensure that the sliders are flush against the edges of 
the paper.
IMPORTANT: Before loading postcards and other 
types of thick paper that may be curled, straighten out 
the paper. The paper may not be fed depending on the 
paper quality.
To print both front and back side of the post card, be 
sure to print the back side before printing the address 
side.
Only...

Preparation for Usage
2-7
Setting Paper Type and Size for the Cassettes and MP Tray
When loading paper into Cassette 1 and 2 and the optional paper feeders (Cassette 3 and 4), set 
the paper size and type. Refer to Specifying Paper Size and Specifying the Paper Type on page2-8 
below.
When loading paper into the optional 3000 sheet paper feeder (Cassette 3), set the paper type. 
Refer to Specifying the Paper Type on page2-8.
After loading paper in the MP tray, specify both the paper type and size. Refer...

Preparation for Usage
2-8
4Press [S] or [T], select the cassette you 
wish to set the paper size from Paper 
size (1st cassette) - Paper size (4th 
cassette) and press [Change #]. 
NOTE: 3rd cassette and 4th cassette are shown when the optional paper feeder or 3000 sheet 
paper feeder have been installed. 
5If [Auto Detection] is selected, choose 
the unit type. If [Standard sizes] is 
selected, choose the paper size. 
Press [Close]. 
6Press [Close]. 
7Press [End]. The display returns to the [Basic]...

Preparation for Usage
2-9
2Press [Machine Default]. 
3Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 
25/20 ppm model and 3200 for the 32/25 and 32/32 ppm models. 
If the correct management code has been entered, the Machine Default screen will be displayed. 
NOTE: If the optional security kit has been installed, the management code is 8 digits long. The 
default setting is 25002500 for the 25/20 ppm model and 32003200 for the 32/25 and 32/32 ppm 
models....

Preparation for Usage
2-10
Specifying the Paper Size to the MP Tray
Specify the paper size when using the MP tray.
The following paper sizes are available.
Auto Detect
The paper size is automatically detected. Select between [Centimeter] ([Centimetre]) and [Inch] 
measurement units. 
1Press the System Menu/Counter key.
2Press [MP tray Setting].  Setting method Unit Paper size
Auto Detect Inch 11 × 17, 8
1/2×14, 11×81/2, 81/2×11, 51/2×81/2
Centimeter A3, B4, A4, A4R, B5, B5R, A5R, B6R, A6R
Other Standard...

Preparation for Usage
2-11
3Press [Auto Detection]. 
4Select [Centimeter] ([Centimetre]) or [Inch]. 
5Press [Close]. The display returns to the [Basic] screen.
Other Standard Sizes
Specify special standard sizes.
1Press the System Menu/Counter key. 
2Press [MP tray Setting]. 
3Press [Others Standard] and press 
[Select size].
4Select the paper size.
5Press [Close]. 
MP tr a y  Se tti ng
AutoBa ck
System Menu / Counter
Input size
Other s
Standar dPaper  Si ze Paper  Ty pe
Plain
Centimeter
Inch Unit...

Preparation for Usage
2-12
6Press [Close]. The display returns to the [Basic] screen.
Input Size
Specify the required paper size.
1Press the System Menu/Counter key. 
2Press [MP tray Setting]. 
3Press [Input size]. 
4Press [+] and [–] to set the Y (height) and X (width) sizes. 
With the metric models, you may enter the size directly using the numeric keys by pressing 
[#-Keys].
5Press [Close]. The display returns to the [Basic] screen.
System Menu / Counter
Sy stem Menu
Defaul t Co p y
L anguage
Accounti...

Preparation for Usage
2-13
Custom Size
Store frequently used paper sizes as custom sizes. Also, the paper type can be set for each custom 
size. 
Assignment Method
1Press the System Menu/Counter key.
2Press [Machine Default]. 
3Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 
25/20 ppm model and 3200 for the 32/25 and 32/32 ppm models. 
If the correct management code has been entered, the Machine Default screen will be displayed. 
NOTE: If the optional...

Preparation for Usage
2-14
6Press [On] and press [+] or [–] to set the 
Y (Length) and X (Width) sizes. 
With the metric models, you may enter 
the size directly using the numeric keys 
by pressing [#-Keys].
To specify a paper type, press [Select 
Paper Type]. Select the paper type and 
press [Close]. 
7Press [Close]. 
8Press [Close]. 
9Press [End]. The display returns to the [Basic] screen.
Setting Method
1Press the System Menu/Counter key. 
2Press [MP tray Setting]. 
3Press [Others Standard] and press...