Kyocera KM C3232 User Manual

Preparation for Usage
2-15
6Press [Close]. The display returns to the [Basic] screen.
Specifying the Paper Type to the MP Tray
Set the paper type when using the MP tray.
The following paper types are available.
Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock, Color 
(Colour), Prepunched, Letterhead, Thick paper, Envelope, Coated, High Quality, Custom 1 - 8
NOTE: Paper type cannot be changed for MP tray paper size when a Custom size has been 
selected that has already set...

Preparation for Usage
2-16
Placing Originals
This section explains how to place an original for copying or scanning. 
Loading Originals on the Platen 
Open the original platen and place the original on the platen. You may also place non-sheet 
originals such as books or magazines. 
1Open the original platen. 
NOTE: If the optional document processor has been 
installed, open the document processor. Before 
opening the document processor, be sure that there 
are no originals left on the original tray or...

Preparation for Usage
2-17
(Metric models)
3Close the original platen. 
IMPORTANT: Do not push the original platen or document processor forcefully when you close it. 
Excessive pressure may crack the platen glass.
Shadows may appear around the edges and in the middle of copies of open-faced originals such as 
books.
Caution: Do not leave the document processor open as there is a danger of 
personal injury.
Downloaded From ManualsPrinter.com Manuals 

Preparation for Usage
2-18
Loading Originals in the Document Processor (option)
Use the optional document processor to automatically read multi-page originals one page at a time. 
Also automatically turn over and read both sides of two-sided originals. 
The document processor supports the following types of originals.
Precautions on Types of Originals for Document Processor 
Do not use the document processor for the following types of originals. Additionally, if originals have 
punched holes or...

Preparation for Usage
2-19
1Adjust the original width guides to fit the originals. 
2Place the originals. Place the side to be read facing up 
(the front side up for two-sided originals) and push the 
front edge of the original deep into the document 
processor. 
IMPORTANT: Confirm that the original width guides 
exactly fits the originals. If there is a gap, readjust the 
original width guides. Failure to do so may cause the 
originals to jam. 
Ensure that loaded originals do not exceed the level...

Preparation for Usage
2-20
Language
Select the language displayed on the touch panel. 
The following languages are available.
1Press the System Menu/Counter key. 
2Press [Language]. 
3Select the key for the language you 
would like to set. The touch panel 
display will change to that language.  Model Type Language
Inch models English, French (Français), Spanish (Español), Japanese ( ), 
Portuguese (Português)
Metric models English, German (Deutsch), French (Français), Spanish (Español), 
Italian...

Preparation for Usage
2-21
Connecting Cables
Connect to a computer to use the printer and scanner features. This device has the following 
interfaces for connecting to computers. 
Use the type of cable appropriate for the interface used. 
NOTE: Use shielded USB, 10Base-T and 100Base-TX cables. 
1Open the main power switch cover, and switch the 
main power switch to off ({ position). 
Turn off the computer’s power when connecting a 
parallel port cable. 
2Open the interface cover on the right side of the...

Preparation for Usage
2-22
Preparing the Printer
Network (TCP/IP) Settings
To use this device as a network printer, first set the device IP address. 
NOTE: Set the IP address according to the operating environment. Obtain this address from your 
network administrator. 
For environments that use DHCP or BOOTP to automatically assign the IP address, this setting is 
not required because the DHCP or BOOTP setting is enabled by default. 
1Press the Printer key. 
2Press [Printer Menu]. 
3Press [Interface]....

Preparation for Usage
2-23
5Press [S] or [T] to select TCP/IP and 
press [Change #]. 
6Press [On] below TCP/IP. 
7Press [S] or [T] to select DHCP and 
press [Change #]. 
8Press [Off] and press [Close]. 
9Press [S] or [T] to select BOOTP and press [Change #]. 
10Press [Off] and press [Close]. 
Interface
NetWare
Parallel NetworkCha ng e  # Setti ng Item Val ue
On
TCP/ I P On
Ether tal k On
Network Status Page Off
USB
Pr inter  menu
TCP/ I P
Off
OnDHCP On
BOOTP On
I P Addr ess   0.   0.   0.   0
Subne t...

Preparation for Usage
2-24
11Press [S] or [T] to select IP Address 
and press [Change #]. 
12Enter the IP address using the numeric 
keys. Input the address for the 3 digits 
displayed in reverse black and white and 
press the # key. 
Verify the 3 digits entered # key. 
13Input the address for the next 3 digits displayed in reverse black and white and press the # key. 
To correct an address entry, press the # key to select the 3 digit address you would like to correct 
and reenter the address using the...