Kyocera KM 8030 User Manual

Basic Operation
3-15
2Press [2 sided/Separation] 
([2-sided/Split]).
3Select the desired Split mode.
4Specify the binding edge of the originals.
5If you choose [2 sided J 1 sided] 
([2-sided J 1-sided]), select the 
orientation of the originals.
6Place the originals in the document processor or on the 
platen and press the Start key. 
If the original is placed on the platen, Scan next 
original(s) will be displayed. Place the next original and 
press the Start key. 
After scanning all originals, press...

Basic Operation
3-16
Sort Mode
By using the document processor, scans multiple 
originals to deliver complete sets of copies as required 
according to page number.
Follow the steps as below to use Sort mode.
1Press [Function].
2Press [Sort/Offset] ([Sort/Group]).
3Press [Sort:On].
4Use the numeric keys to enter the copy quantity.
5Place the originals in the document processor. Press 
the Start key to start copy.
Complete sets of copies will be delivered on the output 
tray.
3
2
1
321321321
Originals...

Basic Operation
3-17
Interrupt Mode
Interrupt copying is useful to pause one copy job and 
copy other originals with different copy settings. After 
you complete the urgent job, you can resume the 
interrupted copy job with the settings as it was.
Follow the steps as below to use interrupt copying.
1Press the Interrupt key. 
Interrupt Mode OK will be displayed.
2Temporarily remove the originals for the current job.
3Place the originals for the interrupt job in the document 
processor or on the platen....

Basic Operation
3-18
Job Reservation
Use Job Reservation mode to scan 
another original and queue the job while 
processing current job. The reserved job 
will be started after the current job is 
completed.
Follow the steps as below to use Job 
Reservation mode.
1Press [Reserve next copy].
Ready to copy. (Job reservation) will be 
displayed.
2Place the originals for the queued job in t he document processor or on the platen.
3Specify the copy settings for the queued 
job.
To finish queuing the job,...

Basic Operation
3-19
Low-Power Mode
To activate Low-Power mode, press the Energy Saver 
key. 
On the operation panel, only the Energy Saver, 
Power, and Main Power indicators will remain lit. 
To resume copying, perform one of the following 
actions. The copier returns to a copy-ready condition.
• Press any key on the operation panel. 
• Place originals in the document processor. 
• Open the document processor. 
The copier will be ready to copy in 10 seconds. 
NOTE: If the copier receives print data in...

Basic Operation
3-20
Sleep Mode
To activate Sleep mode, press the Power key. 
On the operation panel, only the Main Power indicator 
will remain lit. 
The copier will use much less power than Low-Power 
mode. 
To resume copying, press the Power key again. The 
copier will be ready to copy in 30 seconds. 
NOTE: If the copier receives print data in Sleep mode 
through an optional printer unit, it will automatically 
return and process the job.
Auto Sleep mode
In Auto Sleep mode, the copier automatically...

4-1
4 Optional Equipment
This chapter introduces optional equipment available for the copier.
• Overview of Optional Equipment...4-2
• Side Feeder...4-3
• Document Finisher...4-3
• Key Counter...4-3
• Printer Kit...4-4
• Scanner Kit...4-4
• Security Kit...4-4
Downloaded From ManualsPrinter.com Manuals 

Optional Equipment
4-2
Overview of Optional Equipment
The following optional equipments are available for the copier.
Key Counter
Side FeederScanner Kit
Security Kit
Document Finisher Folding UnitMulti-Job Tray
Printer Kit
Downloaded From ManualsPrinter.com Manuals 

Optional Equipment
4-3
Side Feeder
The side feeder has a capacity of 4,000 sheets 
measuring 11 × 8
1/2 (A4 or B5). It can be used in 
conjunction with the copiers built-in cassettes to 
provide a generous supply of paper for copying.
Document Finisher
The document finisher holds a large quantity of finished 
copies. The finisher offers a convenient means of 
sorting. It can also staple finished sets and punch holes 
if equipped with the appropriate optional accessories. 
Other options include the...

Optional Equipment
4-4
How to Insert the Key Counter
Insert the key counter securely into the key counter 
slot.
NOTE: When the key counter function is activated, 
copies can only be made when a key counter is 
inserted into the copier. If the key counter is not 
inserted securely, Insert key counter will be displayed.
Printer Kit
Install the printer kit to use the copier as a printer as 
well. The copier comes equipped with a network board 
and can be used as a network printer accessible from 
several...