Kyocera KM 5050 User Manual

							OPERATION GUIDE4-1
4 Optional Equipment
This chapter introduces the optional equipment available for 
the machine.
• Overview of Optional Equipment.................................. 4-2
• Document Processor .................................................... 4-4
• Paper Feeder ............................................................... 4-4
• 3000 Sheet Paper Feeder ............................................ 4-5
• Built-in Finisher............................................................. 4-5
• Document Finisher ....................................................... 4-9
• 3000 Sheet Document Finisher .................................... 4-9
• Job Separator ............................................................. 4-10
• Document Table ......................................................... 4-10
• Key Counter ................................................................4-11
• Fax Kit ........................................................................ 4-12
• Data Backup Kit.......................................................... 4-12
• Security Kit (USB Key)............................................... 4-13
• Serial Interface ........................................................... 4-13
• PDF Upgrade Kit (USB Key) ...................................... 4-14
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-2OPERATION GUIDE
Overview of Optional Equipment
The following optional equipment is available for the machine.
Document Processor
Paper FeederJob Separator
3000 Sheet Document 
FinisherFolding Unit Built-in FinisherDocument Table
3000 Sheet
Paper Feeder Document FinisherMailbox
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
OPERATION GUIDE4-3
Data Backup KitKey Counter
Fax KitPDF Upgrade KitSecurity Kit
Serial Interface
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-4OPERATION GUIDE
Document Processor
Automatically scans originals. Also you can perform duplex copying and 
split copying.
For document processor operation, refer to Loading Originals in the 
Document Processor on page 2-42.
Paper Feeder
Add an additional 2 paper cassettes like Cassette 2 of the machine. Paper 
capacity and loading method are the same as Cassettes 1 and 2. Refer to 
Loading Paper in the Cassettes on page 2-31.
NOTE: Left cover 3 is located on the left side of the paper feeder for use 
in clearing paper jams.
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
OPERATION GUIDE4-5
3000 Sheet Paper Feeder
In addition to the standard cassettes, a 3000 sheet paper feeder holding 
3,000 sheets of A4, Letter or B5 paper can be added.
NOTE: Left cover 3 is located on the left side of the 3000 sheet paper 
feeder for use in clearing paper jams.
Built-in Finisher
The built-in finisher holds a large quantity of finished prints. The finisher 
offers a convenient means of sorting. Sorted finished prints may also be 
stapled.
1Finisher tray
2Finisher process tray
1
2
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-6OPERATION GUIDE Finisher tray serves as an output tray of sorted prints.
Use the auxiliary tray to sort Ledger, Legal, 8.5×13.5, Oficio II, Letter, 
Letter-R, A3, B4, A4, A4-R, B5, Folio, 8K or 16K prints.
Adding Staples
1Pull to open the stapler front 
cover.
2Pull out the staple holder.
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
OPERATION GUIDE4-7
3Remove the empty staple case 
from the staple holder.
4Holding the staple holder in 
your left hand and a new 
staple case in your right hand, 
insert the staple case into the 
staple holder in the direction of 
an arrow.
5Insert the staple case fully to 
the end. Pull to remove the 
paper tape wound on the 
staple case.
6Insert the staple holder into the 
slot of the staple unit again. 
When fully inserted, the staple 
holder locks with a clicking 
sound.
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-8OPERATION GUIDE
Clearing Staple Jam
1Pull out the staple holder referring to Steps 1 and 2 of Adding Staples.
2Holding the knob A on the face 
plate of the staple holder, lift 
the face plate.
3Clear the staple jammed in the 
cartridge end (staple-loaded 
side).
4Lower the face plate of the 
staple holder.
5Insert the face plate back in place. When fully inserted, the face plate locks 
with a clicking sound.
6After lifting the staple unit slightly, lower it and insert it again into its place.
7Close the stapler front cover.
A
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
OPERATION GUIDE4-9
Document Finisher
The document finisher holds a large quantity of finished copies. The 
finisher offers a convenient means of sorting. Sorted finished copies may 
also be stapled. For further details, refer to the document finisher 
Operation Guide.
3000 Sheet Document Finisher
The document finisher holds a large quantity of finished copies. The 
finisher offers a convenient means of sorting. It can also staple finished 
sets and punch holes if equipped with the appropriate optional 
accessories. For further details, refer to the 3000 sheet document finisher 
Operation Guide. Other options include the mailbox and folding unit.
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-10OPERATION GUIDE
Job Separator
Separates paper according to output tray for easier sorting. Specify an 
output tray for copy or print jobs. Or, specify the default output tray for 
printing from the copy or document box screen, printing from the PC, and 
printing of the received fax data.
Document Table
Place original or other documents when using the machine. It has a drawer 
to accommodate clips.
Downloaded From ManualsPrinter.com Manuals