Home > Kyocera > Printer > Kyocera KM 2550 User Manual

Kyocera KM 2550 User Manual

Here you can view all the pages of manual Kyocera KM 2550 User Manual. The Kyocera manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 61

Basic Operation 
BASIC OPERATION GUIDE3-11 If [1 sided ¼ 2 sided] is selected, 
press S or T to select the Saddle 
Stitch Direction required and 
press [Enter].
3Press [Start]. 
If using the optional Document 
Processor, copying completes 
automatically.
If using the platen, a message 
displays when the next original is 
required. Position the next original 
and press [Start].
When all originals have been scanned, press [Enter].
Saddle Stitch Direction:
Left Side
Top Side
Downloaded From...

Page 62

Basic Operation 
3-12BASIC OPERATION GUIDE
Split Mode
Use this mode to produce one-
sided copies from two-sided or 
double-page spread originals, for 
example a magazine or book.
The following Split Modes are available:
Original Copy
2121
2112
Mode Description
2 sided ¼ 1 sidedOne-sided copies are produced from two-sided originals.
The following Original Stitch Side options are available:
•Left Side Æ Binding edge at left of originals: The images on 
the second side of the originals are copied without...

Page 63

Basic Operation 
BASIC OPERATION GUIDE3-13
1Position the original and press 
[Duplex/Split Page].
If copying from a double-page 
spread original, place the original 
face-down on the platen. Align the 
original flush up against the left 
rear corner of the Platen.
NOTE: Use the Original Size Indicator plates located along the top and 
left edges of the platen to ensure the original is positioned correctly.
2Press S or T to select the Split 
Mode required and press [Enter].
If [2 sided ¼ 1 sided] is...

Page 64

Basic Operation 
3-14BASIC OPERATION GUIDE
Sort Mode
Multiple originals can be scanned 
into memory in a single operation 
and the required number of copy 
sets created.
The maximum number of originals 
which can be scanned depends 
on the machine’s available 
memory.
NOTE: If the optional Document Processor is installed, Sort mode can be 
set as default. For details refer to Chapter 3, Advanced Operation Guide.
1Position the original and press 
[Sort].
2Use the keypad to enter the number of copies...

Page 65

Basic Operation 
BASIC OPERATION GUIDE3-15
Interrupt Mode
Interrupt Mode can be used to 
stop copying or printing 
temporarily to run a more urgent 
job.
After the urgent job is complete, 
the interrupted job can be 
resumed.
The following Interrupt Modes are available:
Interrupting Copying
1Press [Interrupt].
An Interrupt mode OK message 
displays.
2Remove and store the original for the current copying job.
Mode Description
Interrupt Copy• This mode can be used to interrupt a copy job which is...

Page 66

Basic Operation 
3-16BASIC OPERATION GUIDE
3Position the original for the 
interrupt job.
4Select the functions required for 
the interrupt job and press [Start].
5When the interrupt job completes remove the original and press 
[Interrupt].
The settings for the interrupted job are restored.
6Position the previous original and press [Start] to resume copying.
Interrupting Printing or Fax
1Press [Interrupt] when the 
machine is printing.
Select Interrupt mode displays.
2Press S or T to select the...

Page 67

Basic Operation 
BASIC OPERATION GUIDE3-17
3If Priority:Printer or Priority:Fax is selected the output prints automatically.
To perform a copying job, position 
the original, select the functions 
required and press [Start].
4When the interrupt job completes, press [Interrupt].
The interrupted job resumes.
Downloaded From ManualsPrinter.com Manuals 

Page 68

Basic Operation 
3-18BASIC OPERATION GUIDE
Low Power Mode
Energy Saver
1Press [Energy Saver] to place 
the machine into an energy-
saving state.
Only the Energy Saver indicator, 
Power indicator, and the Main 
Power indicator remain lit on the 
operation panel.
2Press [Energy Saver] again to resume copying operations. The recovery 
time before copies can be made is 10 seconds.
NOTE: In Low Power mode, if the machine receives print or fax data it 
will automatically engage and output the data.
Auto Low...

Page 69

Basic Operation 
BASIC OPERATION GUIDE3-19
Auto Sleep Mode
Auto Sleep mode puts the machine into a state of sleep if no operation has 
been performed for a preset period of time. The factory default setting is 
30 minutes (16 and 20 ppm models) and 45 minutes (25 ppm model).
Time that can be set: 
• Inch Specification — 1 to 240 minutes (in 1 minute increments)
• Metric Specification — 1 to 120 minutes (in 1 minute increments)
NOTE: It is possible to set the amount of time before Auto Sleep mode...

Page 70

Basic Operation 
3-20BASIC OPERATION GUIDE
Basic Printing Procedure
Ensure the machine’s printer and network cables and the power cord are 
connected correctly.
Installing the Printer Driver
To use the printer function of your machine, the printer driver software 
must be installed in your computer. For information on how to install the 
printer driver software, refer to the KX Printer Drivers Operation Guide.
Printing from Application Software
The steps required to print a document created with an...
Start reading Kyocera KM 2550 User Manual

Related Manuals for Kyocera KM 2550 User Manual

All Kyocera manuals