Kyocera FS 3140MFP User Manual
Here you can view all the pages of manual Kyocera FS 3140MFP User Manual. The Kyocera manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
5
5-7
Sending Functions
Duplex Sending
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Use the procedure below to select the original type and binding direction when sending scanned originals.
1Press the Send key.
2Place the originals on the document processor.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [Duplex].
5Press the OK key. Duplex appears.
6Press the U or V key to...](http://img.usermanuals.tech/thumb/2828/37279/w300_Kyocera_FS-3140MFP-140.png "Page 141
5
5-7
Sending Functions
Duplex Sending
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Use the procedure below to select the original type and binding direction when sending scanned originals.
1Press the Send key.
2Place the originals on the document processor.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [Duplex].
5Press the OK key. Duplex appears.
6Press the U or V key to...")
5 5-7 Sending Functions Duplex Sending Select the type and binding of original depending on the original. The table below lists the binding directions for each original type. Use the procedure below to select the original type and binding direction when sending scanned originals. 1Press the Send key. 2Place the originals on the document processor. 3Press the Function Menu key. Function Menu appears. 4Press the U or V key to select [Duplex]. 5Press the OK key. Duplex appears. 6Press the U or V key to...
Page 142
5-8 Sending Functions Original Orientation To send the document in the orientation that can be read properly, specify the upper orientation of original. To use the functions below, select th e orientation in which the original is set on the platen. • 1-sided / 2-sided Selection When placing the original on the platen When placing the original on the document processor Use the procedure below to select the orientation w hen placing the originals on the platen for sending. 1Press the Send key. 2Place the...
Page 143
![Page 143
5
5-9
Sending Functions
6Press the U or V key to select [Top Edge Top] or [Top
Edge Left].
7Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
8Specify the destination, and press the Start key to start
sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2828/37279/w300_Kyocera_FS-3140MFP-142.png "Page 143
5
5-9
Sending Functions
6Press the U or V key to select [Top Edge Top] or [Top
Edge Left].
7Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
8Specify the destination, and press the Start key to start
sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Downloaded From ManualsPrinter.com Manuals")
5 5-9 Sending Functions 6Press the U or V key to select [Top Edge Top] or [Top Edge Left]. 7Press the OK key. Completed. is displayed and the screen returns to the basic screen for sending. 8Specify the destination, and press the Start key to start sending. NOTE: Press the Reset key to reset the settings selected in Function Menu. Downloaded From ManualsPrinter.com Manuals
Page 144
![Page 144
5-10
Sending Functions
File Format
Select the file format of the image to send.
The table below lists the file formats and their details.
NOTE: You cannot select [JPEG] if [Black and Wh ite] is selected for the color mode.
Use the procedure below to select the file format for transmission.
1Press the Send key.
2Place the original.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [File Format].
5Press the OK key. File Format appears.
6Press the U or V key to select...](http://img.usermanuals.tech/thumb/2828/37279/w300_Kyocera_FS-3140MFP-143.png "Page 144
5-10
Sending Functions
File Format
Select the file format of the image to send.
The table below lists the file formats and their details.
NOTE: You cannot select [JPEG] if [Black and Wh ite] is selected for the color mode.
Use the procedure below to select the file format for transmission.
1Press the Send key.
2Place the original.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [File Format].
5Press the OK key. File Format appears.
6Press the U or V key to select...")
5-10 Sending Functions File Format Select the file format of the image to send. The table below lists the file formats and their details. NOTE: You cannot select [JPEG] if [Black and Wh ite] is selected for the color mode. Use the procedure below to select the file format for transmission. 1Press the Send key. 2Place the original. 3Press the Function Menu key. Function Menu appears. 4Press the U or V key to select [File Format]. 5Press the OK key. File Format appears. 6Press the U or V key to select...
Page 145
5 5-11 Sending Functions 8Specify the destination, and press the Start key to start sending. NOTE: Press the Reset key to reset the settings selected in Function Menu. Downloaded From ManualsPrinter.com Manuals
Page 146
![Page 146
5-12
Sending Functions
Original Image
Select image quality suitable to the type of original.
The table below shows the quality options.
Use the procedure below to select the quality when sending scanned originals.
1Press the Send key.
2Place the originals.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [Original Image].
5Press the OK key. Original Image appears.
6Press the U or V key to select the desired image quality.
7Press the OK key.
Completed. is displayed...](http://img.usermanuals.tech/thumb/2828/37279/w300_Kyocera_FS-3140MFP-145.png "Page 146
5-12
Sending Functions
Original Image
Select image quality suitable to the type of original.
The table below shows the quality options.
Use the procedure below to select the quality when sending scanned originals.
1Press the Send key.
2Place the originals.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [Original Image].
5Press the OK key. Original Image appears.
6Press the U or V key to select the desired image quality.
7Press the OK key.
Completed. is displayed...")
5-12 Sending Functions Original Image Select image quality suitable to the type of original. The table below shows the quality options. Use the procedure below to select the quality when sending scanned originals. 1Press the Send key. 2Place the originals. 3Press the Function Menu key. Function Menu appears. 4Press the U or V key to select [Original Image]. 5Press the OK key. Original Image appears. 6Press the U or V key to select the desired image quality. 7Press the OK key. Completed. is displayed...
Page 147
![Page 147
5
5-13
Sending Functions
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
The procedure for adjusting the density is explained below.
1Press the Send key.
2Place the original.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [Density].
5Press the OK key. Density appears.
6Press the U or V key to select [Auto] or [Manual].
If you select [Manual], press the OK key, and then...](http://img.usermanuals.tech/thumb/2828/37279/w300_Kyocera_FS-3140MFP-146.png "Page 147
5
5-13
Sending Functions
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
The procedure for adjusting the density is explained below.
1Press the Send key.
2Place the original.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [Density].
5Press the OK key. Density appears.
6Press the U or V key to select [Auto] or [Manual].
If you select [Manual], press the OK key, and then...")
5 5-13 Sending Functions Adjusting Density Use the procedure below to adjust the density when scanning the originals. The table below shows the available settings. The procedure for adjusting the density is explained below. 1Press the Send key. 2Place the original. 3Press the Function Menu key. Function Menu appears. 4Press the U or V key to select [Density]. 5Press the OK key. Density appears. 6Press the U or V key to select [Auto] or [Manual]. If you select [Manual], press the OK key, and then...
Page 148
5-14 Sending Functions Scan Resolution Select the fineness of scanning resolution. The finer the scanning becomes (the larger the number becomes), the better the image quality becomes. However, better resolution also results in larger file size (file capacity) and longer scanning and sending times. The selectable resolution is 200x100dpi Normal, 200x200dpi Fine, 200x400dpi Super Fine, 300x300dpi, 400x400dpi Ultra Fine, or 600x600dpi. The procedure for adjusting the scanning resolution when sending a...
Page 149
![Page 149
5
5-15
Sending Functions
Color / Grayscale / Black and White Selection
This feature allows you to select the select the color mode used for scanning when sending images. You can select
from Full Color, Grayscale or Black & White.
Use the procedure below to select the co lor mode when sending scanned images.
1Press the Send key.
2Place the original.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [Color Selection].
5Press the OK key. Color Selection appears.
6Press...](http://img.usermanuals.tech/thumb/2828/37279/w300_Kyocera_FS-3140MFP-148.png "Page 149
5
5-15
Sending Functions
Color / Grayscale / Black and White Selection
This feature allows you to select the select the color mode used for scanning when sending images. You can select
from Full Color, Grayscale or Black & White.
Use the procedure below to select the co lor mode when sending scanned images.
1Press the Send key.
2Place the original.
3Press the Function Menu key. Function Menu appears.
4Press the U or V key to select [Color Selection].
5Press the OK key. Color Selection appears.
6Press...")
5 5-15 Sending Functions Color / Grayscale / Black and White Selection This feature allows you to select the select the color mode used for scanning when sending images. You can select from Full Color, Grayscale or Black & White. Use the procedure below to select the co lor mode when sending scanned images. 1Press the Send key. 2Place the original. 3Press the Function Menu key. Function Menu appears. 4Press the U or V key to select [Color Selection]. 5Press the OK key. Color Selection appears. 6Press...
Page 150
![Page 150
5-16
Sending Functions
Continuous Scan
When the multi-page originals cannot be placed in the document processor at one time, the originals can be scanned
in separate batches and then sent as one job. With this function, originals can be scanned one after another until you
press [End Scan] (the Right Select key).
The procedure for using continuous scanning w hen sending scanned images is explained below.
1Press the Send key.
2Press the Function Menu key. Function Menu appears.
3Press the U or V key...](http://img.usermanuals.tech/thumb/2828/37279/w300_Kyocera_FS-3140MFP-149.png "Page 150
5-16
Sending Functions
Continuous Scan
When the multi-page originals cannot be placed in the document processor at one time, the originals can be scanned
in separate batches and then sent as one job. With this function, originals can be scanned one after another until you
press [End Scan] (the Right Select key).
The procedure for using continuous scanning w hen sending scanned images is explained below.
1Press the Send key.
2Press the Function Menu key. Function Menu appears.
3Press the U or V key...")
5-16 Sending Functions Continuous Scan When the multi-page originals cannot be placed in the document processor at one time, the originals can be scanned in separate batches and then sent as one job. With this function, originals can be scanned one after another until you press [End Scan] (the Right Select key). The procedure for using continuous scanning w hen sending scanned images is explained below. 1Press the Send key. 2Press the Function Menu key. Function Menu appears. 3Press the U or V key...