Kyocera FS 3040MFP User Manual

Appendix-11
Basic Paper Specifications
This machine is designed to print on standard copy paper as used in regular (dry) copiers and page printers such as 
laser printers. It also supports a variety of other types of  paper that conform to the specifications given in this 
appendix. 
Be careful when choosing paper. Paper unsuitable for the machine may cause jams or may be wrinkled. 
Supported Paper 
Use standard copy paper  for regular copiers or laser printers. The printing quality will be  affected by...

Appendix-12
Choosing the Appropriate Paper
This section describes guidelines for choosing paper. 
Condition 
Avoid using paper with bent corners or that  is curled, dirty, or torn. Do not use paper that has a rough surface or paper 
fiber lint, or that is especially delicat e. Use of paper in any of these conditions will not only  deliver poor copies but may 
also cause jams and shorten the useful life of the mach ine. Choose paper with a smooth and even surface; however, 
avoid coated paper or paper...

Appendix-13
Basis Weight
In countries that use the metric system, basis weight is the weight in grams of one sheet of paper one square meter 
in area. In the United States, basis weight is the weight  in pounds of one ream (500 sheets) of paper cut to the 
standard size (or trade size) for a specific grade of paper . Paper that is too heavy or too light may be supplied 
incorrectly or cause paper jams, which may cause excess ive wear of the machine. Mixed paper weight (i.e., 
thickness) may cause several...

Appendix-14
Packaging: Choose paper that is properly packaged and sta cked in boxes. Ideally, the packaging itself should have 
been treated with a coating to inhibit moisture.
Specially treated paper:  We do not recommend printing onto the following types of paper, even if it conforms to the 
basic specifications. When you use t hese kinds of paper, purchase a small amount first as a sample to test.
• Glossy paper
• Watermarked paper
• Paper with an uneven surface
• Perforated paper
Special Paper
This...

Appendix-15
Transparency (OHP film)
Transparencies must be able to withstand the heat of printing. Transparencies must meet the following conditions.
To avoid problems, use the multi purpose tray for transparencies and load transparencies with the long side facing 
the machine.
If transparencies jam frequent ly at output, try pulling the leading edge of sheets gent ly as they are ejected. 
Cardstock Before loading Hagaki into the multi purpose tray, fan them 
and align the edges. If the Hagaki paper is...

Appendix-16
Envelopes
Use the multi purpose tray for envelopes.
Due to the structure of envelopes, printing evenly over the entire surface may not be possible in some cases. Thin 
envelopes in particular may be wrinkled by the machine in some cases as  they pass through. Before purchasing 
envelopes in volume, try testing a sample to ensure the print quality.
Storing envelopes for a long period may cause them to be come wrinkled. Thus, keep the package sealed until you 
are ready to use them. 
Keep the...

Appendix-17
Some label paper has large margins on the top sheet. When using such paper, do not peel these margins from the 
carrier sheet before completing output.
Use label paper that conforms to the following specifications. 
Colored Paper
Colored paper must conform to the specifications listed on  the page 11 of the Appendix. In addition, the pigments in 
the paper must be able to withstand the heat of printing (up to 200°C or 392°F).
Preprinted Paper
Preprinted paper must conform to the...

Appendix-18
Specifications
NOTE: Specifications are subject to change without notice.
Machine
ItemDescription
FS-3040MFP FS-3140MFP
Ty p e Desktop
Printing Method Electrophotography by semiconductor laser, single drum system
Supported Original Types Sheet, Book, 3-dimensional objects (m aximum original size: Folio/Legal)
Original Feed System Fixed
Paper Weight Front Cassette 60 to 120 g/m
2 (Duplex: 60 to 120 g/m2)
MP Tray 60 to 220 g/m
2, 230 µm2 (Cardstock)
Paper Type Front Cassette Plain, Rough,...

Appendix-19
Printer
Image Write SystemSemiconductor laser (1 beam)
Main Memory Standard: 256MB     Maximum: 768MB
Interface USB Interface Connector: 1 (USB Hi-Speed)
USB Host: 1
Network interface: 1 (10 BASE-T/100 BASE-TX)
Resolution 600 × 600 dpi
Operating 
Environment Te m p e r a t u r e
10 to 32.5°C/50 to 90.5°F
Humidity 15 to 80 %
Altitude 8,200 feet/2,500 m or less
Brightness 1,500 lux or less
Dimension (W × D × H) 11 1/2 × 19 9/16 × 21 1/2
494 × 497.1 × 545.5 mm
Weight (without toner container)...

Appendix-20
Scanner
*1  Available Operating System : Windows 2000 (Service Pack 4), Windows XP, Windows Vista
*2 Available Operating  System : Windows Vista
Operating System Windows 2000, Windows XP, Windows XP Professional, Windows Server 
2003, Windows Server 2003 x64 Edit ion, Windows Vista x86 Edition, 
Windows Vista x64 Edition, Windows  Server 2008, Windows Server 2008 
x64 Edition, Windows 7, Apple Macintosh OS 10.x
Interface Standard USB Interface Connector: 1 (USB Hi-Speed)
USB Host: 1
Network...