Kyocera FS 1350DN User Manual

7-14Using the Operation Panel
1 Firmware Version
This item shows the version and release date of the printer firmware.
2 Printer Settings Information
This item shows various printer settings for hardware-related items:
•MP tray paper size and type
•Paper cassette size and type
•Sleep time
•Formfeed timeout time
3 Installed Options
This item shows the option installed in the printer:
•Memory card (CompactFlash card)
4 Network Status
This item shows the IP address, subnet mask address, and default 
gateway...

Using the Operation Panel7-15
Print Fonts List
To help you decide in selecting a font, you can printout lists of the 
internal fonts or the optional fonts.
1Press Z while Report Print > is displayed.
2Press U or V repeatedly until >Print Fonts List appears.
3Press [OK]. A question mark (?) appears.
4Press [OK] again. The message Processing appears and the 
printer prints a list of fonts with a sample and font ID (number) for 
each of them.
Print RAM Disk File List
This allows you to print a list of the...

7-16Using the Operation Panel
USB Memory (USB flash memory selection)
This specifies the settings for removing the USB flash memory and 
printing USB flash memory content. The USB Memory menu 
automatically appears when you install the USB memory.
The options available in USB flash memory are as follows:
•Print File (Printing a file)
• Copies (Number of copies)
• Paper Source (Selecting the paper feed source)
• Remove Device (Removing the USB flash memory)
• Print File List (Printing a list of the files...

Using the Operation Panel7-17
Copies (Number of copies)
Sets the number of copies printed of the specified file in USB flash 
memory.
While Copies  in step 5 above is displayed, press   and   or   and   
to display the number of copies. (E.g.:  10)
7Press [OK]. Paper Source  and a question mark ( ?) appears.
Paper Source (Selecting the paper feed source)
Sets the paper used for printing the specified file in USB flash memory.
1While  Paper Source  in step 2 above is displayed, press   and   
or  ...

7-18Using the Operation Panel
Counter (Viewing the counter value)
This only displays the total number of pages printed. You cannot change 
the displayed number.
1Press [MENU].
2Press U or V repeatedly until Counter > appears.
3Press Z. >Printed Pages appears as he total number of pages 
printed. (E.g.: 2000)
4Press [MENU]. The display returns to Ready.
Counter        >
>Printed Pages
           0002000
Downloaded From ManualsPrinter.com Manuals 

Using the Operation Panel7-19
Paper Settings
This sets the paper size and type for the MP tray and cassettes from 
which paper is supplied.
The options available in Paper Settings are as follows:
•MP Tray Size (Setting MP tray paper size)
•MP Tray Type (Setting the MP tray paper type)
•Cassette (1 to 3) Size (Setting the cassette paper size)
•Cassette (1 to 3) Type (Setting the cassette paper type)
•Type Adjust (Creating custom paper type)
•Reset Type Adjust (Resetting the custom paper type)
1Press...

7-20Using the Operation Panel
MP Tray Size (Setting MP tray paper size)
When you use the MP tray, you should set the MP tray size to the paper 
size that is used to format the job to print. If the sizes do not match, 
printing will not be performed on the correct size paper. 
The default setting is Letter size for the U.S. and Canada and A4 for 
other countries. For more information about the paper sizes that you can 
feed from the MP tray, refer to Paper Specifications on page2-2.
1Press Z while Paper...

Using the Operation Panel7-21
3Press [OK]. A blinking question mark (?) appears.
4Press U or V to display the desired paper type. The message 
display toggles through the following paper types:
PLAIN
TRANSPARENCY
PREPRINTED
LABELS
BOND
RECYCLED
VELLUM
ROUGH
LETTERHEAD
COLOR
PREPUNCHED
ENVELOPE
CARDSTOCK
THICK
HIGH QUALITY
CUSTOM 1 (to 8)
5Press [OK].
6Press [MENU]. The display returns to Ready.
Cassette (1 to 3) Size (Setting the cassette paper size)
To set the size for the paper cassette, load the paper...

7-22Using the Operation Panel
Setting the Paper Size from the Operation Panel
Use the operation panel to set the size of paper loaded in the cassette 
on the printer.
1Press Z while Paper Settings > is displayed.
2Press U or V repeatedly until >Cassette Size > appears. If 
optional paper feeders are added, Cassette1 Size will appear for 
the standard paper cassette and Cassette2 Size, and 
Cassette3 Size will appear for the optional paper feeders.
3Press [OK]. A blinking question mark (?) appears.
4Press...

Using the Operation Panel7-23
Unit (Selecting the unit of measurement)
1Press Z.
2Press U or V repeatedly until >>Unit appears. The unit of 
measurement can be selected between millimeters and inches. The 
current unit of measurement is displayed (the default setting is mm).
3Press [OK]. A blinking question mark (?) appears.
4Select mm or inch using U or V. 
5Press [OK]. 
Set the dimensions of the paper as described in the next section.
Entering the Width and Length
Enter the paper size for X Dimension...