Kyocera FS 1350DN User Manual

7-64Using the Operation Panel
Each time you press U or V, the following settings to be changed 
appear in succession.
•Change ID
•Change Password
4Press [OK] again. The administrator ID and password are 
confirmed.
5Press [MENU]. The display returns to Ready.
Change ID (Administrator ID change)
You can use this to change the administrator ID.
1In step 3 in Password (Administrator Password input) above, press 
U or V while the Admin (Change) screen is displayed until 
>Change ID appears. (E.g.: Where the...

Using the Operation Panel7-65
Adjust/Maintenance (Adjust/Maintenance 
selection/setting)
Adjust/Maintenance is used to adjust the print quality and to carry out 
printer maintenance. 
The options available in Adjust/Maintenance are as follows:
•Restart Printer
•Service (for maintenance)
1Press [MENU].
2Press U or V repeatedly until Adjust/Maintenance > appears.
Restart Printer
The procedure described below resets the printer’s temporary 
conditions, such as the current page orientation, font, etc., set...

7-66Using the Operation Panel
Service (for maintenance)
The options available in Service are as follows:
•Print Status Page (Printing the service status page)
•Print Network Status Page (Printing the network status page)
•Print Test Page
•Developer (Initializing the developer unit)
1Press Z while Adjust/Maintenance > is displayed.
2Press U or V repeatedly until >Service > appears.
Print Status Page (Printing the service status page)
The service status page contains printer settings information that is...

Using the Operation Panel7-67
2Press U or V repeatedly until >>Print Test Page appears.
3Press [OK]. A question mark (?) appears.
4Press [OK] again. Processing appears and a test page is printed 
out.
5When printing ends, the display returns to Ready.
Developer (Initializing the developer unit)
The replaced developer can be automatically fill up the toner using this 
menu when a toner container is installed and the printer is turned on. 
This is primarily used for maintenance by service representative....

7-68Using the Operation Panel
Downloaded From ManualsPrinter.com Manuals 

Option8-1
8Option
This chapter explains the options for this printer.
General Information 8-2
Expansion Memory Modules 8-3
Paper Feeder (PF-100) 8-5
CompactFlash (CF) Card 8-6
USB Flash Memory 8-6
Downloaded From ManualsPrinter.com Manuals 

8-2Option
General Information
The printers have the following options available to satisfy your printing 
requirements. 
For instructions on installing individual options, refer to the 
documentation included with the option. Some options are explained in 
the following sections.
NoteInstall the memory module before installing the optional 
paper feeder (PF-100).
Expansion Memory 
Module (DIMM 
128/256/512/1024 MB)
Paper Feeder (PF-100) 
Up to two cassettes can 
be attached.CF Card
USB Flash Memory...

Option8-3
Expansion Memory Modules
To expand the printer memory for more complex print jobs and faster 
print speed, you can plug in optional memory module (dual in line 
memory module) in the memory slot provided on the printer main 
controller board. You can select additional memory module from 128, 
256, 512, or 1024 MB. The maximum memory size is 1152 MB.
Precautions for Handling the Printers Main 
Controller Board and Memory Module
To protect electronic parts, discharge static electricity from your...

8-4Option
3Remove the fixing tape in case of the first installation. Then, remove 
the memory slot cover as shown in the figure.
4Remove the memory module from its package.
5Aligning the cutouts of the memory module with the matching keys of 
the socket, carefully plug the memory module into the memory 
socket until it clicks in place. Then, push down the memory module 
to secure.
6Push down the memory module to secure.
7Reinstall the memory slot cover and the right cover.
Removing a Memory Module
To...

Option8-5
Paper Feeder (PF-100)
The PF-100 allows you to add two more paper cassette to the bottom of 
the printer for continuous feeding of a large volume of paper. Each paper 
cassette can hold up to approximately 250 sheets of ISO A4, ISO A5, 
JIS B5, Letter, or Legal size (80g/m
2) paper. This feeder is attached at 
the bottom of the printer as shown on the left.
CAUTION  Before attaching the PF-100 to the printer, make 
sure that the printer is switched off.
Downloaded From ManualsPrinter.com Manuals