Kyocera FS 1350DN User Manual

7-54Using the Operation Panel
For setting the time until the panel is reset, refer to the next section 
Panel Reset Timer (Setting the panel reset timer).
1Press Z while >Timer > is displayed.
2Press U or V repeatedly until >>Auto Panel Reset appears.
3Press [OK]. A blinking question mark (?) appears.
4Select On or Off using U or V.
5Press [OK].
6Press [MENU]. The display returns to Ready.
Panel Reset Timer (Setting the panel reset timer)
When Auto Panel Reset is set to On, this sets the time until the...

Using the Operation Panel7-55
Security
The security functions can be set up to protect printer operation and the 
print data.
The options available in Security are as follows:
•ID (Administrator ID input)
•Password (Administrator password input)
•I/F Block (Interface (external device) block setting)
•NetWare (NetWare setting)
•AppleTalk (AppleTalk setting)
•IPP (IPP setting)
•SSL Server (SSL Server setting)
•IPSec (IPSec setting)
•Security Level (Security level setting)
1Press [MENU].
2Press U or V...

7-56Using the Operation Panel
Password (Administrator Password input)
To set up the Security functions, you must enter an administrator ID and 
administrator password. For information on how to set the administrator 
password, refer to Admin (Administrator settings) on page7-63.
1When you entered the ID in the previous step (ID (Administrator ID 
input)), the message display shows 
Password (Administrator 
password input) and a blinking cursor (_).
2Press U or V to increase or decrease, respectively, the...

Using the Operation Panel7-57
USB Device (USB interface setting)
This locks and protects the USB interface. The default setting is 
Unblock.
1Press Z while >I/F Block > is displayed. >>USB Device 
appears.
2Press [OK]. A blinking question mark (?) appears.
3Select Block or Unblock using U or V.
4Press [OK].
5Press [MENU]. The display returns to Ready.
>>USB Device
? Unblock
Downloaded From ManualsPrinter.com Manuals 

7-58Using the Operation Panel
NetWare (NetWare setting)
NetWare is a PC-based network operating system specifically for 
servers. 
NetWare is a client-server system that operates by installing the 
NetWare OS on the server and dedicated client modules (NetWare 
clients) on the client machines (running MS-DOS, OS/2, Windows, etc.). 
The basic network layer protocol used is NetWares own IPX 
(Internetwork Packet eXchange)/SPX (Sequenced Packet eXchange), 
but the system also supports TCP/IP. 
The feature...

Using the Operation Panel7-59
AppleTalk (AppleTalk setting)
AppleTalk is a communications protocol used primarily on Macintosh 
computers and also refers to the Mac OS network functions. 
AppleTalk assigns 24-bit network addresses (a 16-bit network section 
and an 8-bit node address) that are used to identify devices (computers, 
printers, etc.) on the network. 
When the power is turned on, a broadcast signal is sent out onto the 
network and the addresses and machine names are automatically 
assigned....

7-60Using the Operation Panel
SSL Server (SSL Server setting)
SSL (Secure Sockets Layer) refers to a protocol used to encrypt 
information sent and received over a network. SSL can currently be used 
to encrypt data such as the WWW or FTP files widely used on the 
Internet so that privacy-related information, credit card numbers, 
corporate secrets and other confidential information can be sent and 
received safely.
SSL servers use this protocol to authenticate servers and clients.
The default setting is...

Using the Operation Panel7-61
3DES (SSL Server 3DES setting)
3DES (Triple Data Encryption Standard) is a high level of encryption in 
which DES encryption is repeated threefold.
The default setting is Off.
1Press Z while >SSL Server On > is displayed. >>3DES appears.
2Press [OK]. A blinking question mark (?) appears.
3Select On or Off using U or V.
4Press [OK].
5Press [MENU]. The display returns to Ready.
AES (SSL Server AES setting)
AES (Advanced Encryption Standard) was developed to replace DES as 
the...

7-62Using the Operation Panel
HTTPS (SSL Server HTTPS setting)
HTTPS (HyperText Transfer Protocol Secure) is a protocol that adds 
SSL data encryption, message authentication and a digital signature 
function to the HTTP protocol used for data transfer between WWW 
servers and clients.
S-HTTP is a similar protocol, but HTTPS differs in that it uses SSL.
The default setting is Off.
1Press Z while >SSL Server On > is displayed. >>HTTPS 
appears.
2Press [OK]. A blinking question mark (?) appears.
3Select On...

Using the Operation Panel7-63
Admin (Administrator settings)
The administrator setting is a function that identifies the user who can 
use the printer and can be used to manage users. The administrator is 
authenticated by the entered administrator ID and password and can 
then use the printers security functions. 
The options available in Admin are as follows:
•ID (Administrator ID input)
•Password (Administrator password input)
•Change ID (Administrator ID change)
•Change Password (Administrator...