Home > Kyocera > Printer > Kyocera FS 1350DN User Manual

Kyocera FS 1350DN User Manual

Here you can view all the pages of manual Kyocera FS 1350DN User Manual. The Kyocera manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 91

6-12Troubleshooting
MP Tray
1
Remove the paper jammed at the MP tray.
2Reload the MP tray. Open and close the top cover to clear the error 
and the printer warms up and resumes printing.
IMPORTANTDo not try to remove paper that has already been 
partially fed. Proceed to Inside the Printer on page6-15.
Downloaded From ManualsPrinter.com Manuals 

Page 92

Troubleshooting6-13
Paper Cassette/Paper Feeder
1
Pull out the cassette or optional paper feeder.
2Remove any partially fed paper. 
3Push the cassette back in securely. The printer warms up and 
resumes printing.
IMPORTANTDo not try to remove paper that has already been 
partially fed. Proceed to Inside the Printer on page6-15.
NoteCheck to see if paper is loaded correctly. If not, reload 
the paper.
Downloaded From ManualsPrinter.com Manuals 

Page 93

6-14Troubleshooting
Duplexer
Paper is jammed in the duplexer. Remove the jammed paper using the 
procedure given below.
1Pull the paper cassette all the way out of the printer.
2Open the duplexers cover in front of the printer and remove any 
jammed paper.
Open the duplexers cover at the rear of the printer and remove any 
jammed paper.
3Push the cassette back in securely, and open and close the top 
cover to clear the error. The printer warms up and resumes printing.
Downloaded From ManualsPrinter.com...

Page 94

Troubleshooting6-15
Inside the Printer
1
Pull the paper cassette all the way out of the printer. Remove any 
partially fed paper.
2Open the top cover and front cover, and lift the developer unit 
together with the toner container out of the printer.
3Remove the drum unit from the printer by holding the green levers 
with both hands.
4If the jammed paper appears to be pinched by rollers, pull it along 
the normal running direction of the paper.
IMPORTANTDo not try to remove paper that has already been...

Page 95

6-16Troubleshooting
5Return the drum unit to its position, aligning the guides at both ends 
with the slots in the printer.
6Insert the developer unit together with the toner container, back into 
the machine. Close the top cover and the front cover. The printer 
warms up and resumes printing.
Downloaded From ManualsPrinter.com Manuals 

Page 96

Troubleshooting6-17
Rear Cover
1
Open the rear cover and remove the jammed paper by pulling it out.
If the paper is jammed inside the fuser unit, open the fuser cover and 
remove the paper by pulling it out.
2Close the rear cover, and open and close the top cover to clear the 
error. The printer warms up and resumes printing.
CAUTION  The fuser unit inside the printer is hot. Do not 
touch it, as it may result in burn injury.
Downloaded From ManualsPrinter.com Manuals 

Page 97

6-18Troubleshooting
Downloaded From ManualsPrinter.com Manuals 

Page 98

Using the Operation Panel7-1
7 Using the Operation 
Panel
This chapter contains explanations on the following topics:
General Information 7-2
Understanding the Operation Panel 7-3
Using the Menu Selection System 7-8
Report Print 7-11
USB Memory (USB flash memory selection) 7-16
Counter (Viewing the counter value) 7-18
Paper Settings 7-19
Print Settings 7-27
Network (Network settings) 7-39
Device Common (Selecting/Setting the common device) 7-44
Security 7-55
Admin (Administrator settings) 7-63...

Page 99

7-2Using the Operation Panel
General Information
This chapter provides the information you need to configure the Ecosys 
printer. In general you need to use the operation panel only to make 
default settings. You can make most changes to the printer settings 
using the printer driver through the application software.
You can also access the printers various settings from a remote 
location, by using the control panel, the printer driver or other utilities 
such as the Status Monitor Utility. Other...

Page 100

Using the Operation Panel7-3
Understanding the Operation Panel
The operation panel on the top of the printer has a 2-line by 16-character 
liquid crystal display (LCD), eight keys, and three indicators (LED).
Messages that appear on the display and functions of indicators and 
keys are explained in this chapter.
Downloaded From ManualsPrinter.com Manuals 
Start reading Kyocera FS 1350DN User Manual

Related Manuals for Kyocera FS 1350DN User Manual

All Kyocera manuals