Kyocera FS 1128MFP User Manual

							Default Setting (System Menu) 
OPERATION GUIDE8-63
8
Use the procedure below to set Select Key Set.
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Send].
2Press the  OK key. The Send menu appears.
3Press the  U or  V key to select [Select Key Set.].
4Press the  OK key. Select Key Set. appears.
5Press the  U or  V key to select [Left] or [Right].
6Press the  OK key. This displays the function 
selection screen for the flex ible key selected in step 
5. The screen shown is the one when [Left] is 
selected.
7Press the  U or  V key to select the function you 
want to register to the flexible key.
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the Send menu.
IMPORTANT:  If you try to set th e function that is 
registered to the other flexible  key, you cannot set it and 
This function is already registered. is displayed.
Sys. Menu/Count.:a  b 
7  Copy
8  Printer
*********************
[ Exit ]
9  Send
Send:
a  b 
*********************
2  DestinationCheck [ Exit ]
1  Select Key Set.
Select Key Set.:
a  b 
*********************
2  Right [ Exit ]
1  Left
Left:
a  b 
2  Color Selection
*********************
4  Original Image
3  Original Size
This function is
already registered.
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-64OPERATION GUIDE
DestinationCheck
Set whether or not to display the destination confirmation screen before transmission. The setting items are as 
follows:
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Send].
2Press the  OK key. The Send menu appears.
3Press the U  or V key to select [DestinationCheck].
4Press the  OK key. The DestinationCheck menu 
appears.
5Press the  U or  V key to select [Dest. Confirm] or 
[Check New Dest.].
6Press the  OK key. This displays the setting screen 
for the selected function.
The screen shown is the one when Dest. Confirm 
is selected.
Item
Description
Dest. Confirm. Sets whether or not to display the 
destination confirmation screen before 
transmission.
Check New Dest. Sets whether or not to display the  destination confirmation screen for a new 
destination.
Sys. Menu/Count.:a  b 
7  Copy
8  Printer
*********************
[ Exit ]
9  Send
Send:
a  b 
*********************
2  DestinationCheck [ Exit ]
1  Select Key Set.
DestinationCheck:
a  b 
*********************
2  Check New Dest. [ Exit ]
1  Dest. Confirm.
Dest. Confirm.:
a  b 
*********************
2  On
1 *Off
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-65
8
7Press the U or  V key to select [Off] or [On].
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the Send menu.
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-66OPERATION GUIDE
Document Box Settings
The following settings are available for Document Box.
• Select Key Set …8-66
Select Key Set
If you register a function to the Left Select key or Right Select key, you can quickly set the function when 
printing from or saving to a document box. 
You can register one of the following functions to each key for either of printing from and saving to a document 
box. 
Print
•None
• Collate
• Paper Selection
•Duplex
• File Name Entry
• JobFinish Notice
• Print Override
• Encrypted PDF
Store
•None
• Color Selection
• Original Size
• Original Image
• Scan Resolution
• Storing Size
•Zoom
• Orig.Orientation
• Continuous Scan
• File Format
• File Name Entry
• JobFinish Notice
•Density
•Duplex
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-67
8
Use the procedure below to set Select Key Set.
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Document Box].
2Press the  OK key. The Document Box menu 
appears.
3Press the  U or  V key to select [Select Key Set.].
4Press the  OK key. Select Key Set. appears.
5Press the  U or  V key to select [P rint] or [Store].
6Press the OK key. This displays the flexible key 
selection screen for the function selected in step 5. 
The screen shown is the one when [Print] is 
selected. 
7Press the  U or  V key to select [Left] or [Right].
8Press the  OK key. This displays the function 
selection screen for the flex ible key selected in step 
7. The screen shown is the one when [Left] is 
selected. 
9Press the  U or  V key to select the function you 
want to register to the flexible key. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Document Box menu.
Sys. Menu/Count.:a  b 
*********************
<  Edit Destination
=  Adjust/Maint.
[ Exit ]
;  Document Box
Document Box:
a  b 
*********************
2  Select Key Set.
3  Polling Box [ Exit ]
1  Sub Address Box
Select Key Set.:
a  b 
*********************
2  Store [ Exit ]
1  Print
Print:
a  b 
*********************
2  Right [ Exit ]
1  Left
Left:
a  b 
*********************
2  Collate
3  Paper Selection
1  None
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-68OPERATION GUIDE
IMPORTANT: If you try to set th e function that is 
registered to the other flexible  key, you cannot set it and 
This function is already registered. is displayed.
This function is
already registered.
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-69
8
Printer Settings
Printing from computers, settings are generally made on the application software screen. However, the following 
settings are available for configuring the defaults to customize the machine.
• Emu lation Set …8-69
• EcoPrint …8-72
• Override A4/LTR …8-73
• Duplex …8-74
• Copies …8-75
• Orientation …8-76
• FormFeed Timeout …8-77
• LF Action …8-77
• CR Action …8-78
• Paper Feed Mode…8-79
NOTE: If user login administration is enabled, you  can only change the settings by logging in with 
administrator privileges.
Emulation Set
Select the emulation for operating this machine by commands oriented to other types of printers.
Selection of emulation
This machine can emulate the following printers: 
• Line Printer
• IBM Proprinter
•DIABLO 630
• EPSON LQ-850
•PCL6
• KPDL
• KPDL(Auto)
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-70OPERATION GUIDE
Use the procedure below to select the emulation.
1In the Sys. Menu/Count. menu, press the 
U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [Emuration Set.].
 
4Press the  OK key. Emuration Set. appears.
5Press the  U or V  key to select the printer you want 
to emulate.
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu. 
NOTE: If you select [KPDL] or [KPDL(Auto)], the 
operation after selecting the emulation is different from 
others. 
If you select [KPDL], refer to  page 8-71.
If you select [KPDL(Auto)], refer to  page 8-71.
Sys. Menu/Count.:a  b 
7  Copy
*********************
9  Send
[ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
Emulation Set.:
a  b 
5  PCL6
6  KPDL
*********************7 *KPDL(Auto)
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-71
8
When KPDL Is Selected for Emulation
When you use the KPDL emulation mode, set whether or not to output KPDL error reports. The default setting 
is Off . 
Use the procedure below to make the setting.
1In Emulation Set, press the U  or V key to select 
[KPDL].
2Press the  OK key. KPDL Error Rpt appears.
3Press the  U or  V key to select [Off] or [On].
4Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
When KPDL(Auto) Is Selected for Emulation
If you use the KPDL(Auto) emulation mode, KPDL and an other emulation mode can be automatically switched 
according to the data (alternative emulation). 
For alternative emulation, you can select one of  the following printers. The default setting is PCL6.
• Line Printer
• IBM Proprinter
•DIABLO 630
• EPSON LQ-850
•PCL6
Also, as when you select [KPDL], set whether or not  to output KPDL error reports. The default setting is Off. 
Use the procedure below to make the setting.
1In Emulation Set, press the U  or V key to select 
[KPDL(Auto)].
Emulation Set.:a  b 
5  PCL6
*********************
7  KPDL(Auto)
6  KPDL
KPDL Error Rpt:
a  b 
*********************
2  On
1 *Off
Emulation Set.:
a  b 
5  PCL6
6  KPDL
*********************7  KPDL(Auto)
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-72OPERATION GUIDE
2Press the OK key. Alt. Emulation appears.
3Press the  U or  V key to select the printer for 
alternative emulation.
4Press the  OK key. KPDL Error Rpt appears.
5Press the  U or  V key to select [Off] or [On].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu. 
EcoPrint
EcoPrint conserves toner when printing. This is recomm ended for test copies where faded printing is not a 
problem.
Use the procedure below to specify the EcoPrint setting.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [EcoPrint].
Alt. Emulation:a  b 
3  DIABLO 630
4  EPSON LQ-850
*********************5 *PCL6
KPDL Error Rpt:
a  b 
*********************
2  On
1 *Off
Sys. Menu/Count.:
a  b 
7  Copy
*********************
9  Send [ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
Downloaded From ManualsPrinter.com Manuals