Kyocera FS 1128MFP User Manual

							Default Setting (System Menu) 
OPERATION GUIDE8-43
8
8Press the OK key.  Completed.  is displayed and the 
screen returns to the Function Default menu. 
EcoPrint
Select the EcoPrint default. The tabl e below shows the available settings.
NOTE: Refer to page 4-10 for EcoPrint.
Use the procedure below to set the default EcoPrint setting.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [EcoPrint]. 
Item
Description
Off No EcoPrint performed. 
On EcoPrint performed.
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Function Default:
a  b 
*********************
2  Scan Resolution
3  FAX Resolution [ Exit ]
1  Color Selection
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-44OPERATION GUIDE
6Press the OK key. EcoPrint appears. 
7Press the  U or  V key to select [Off] or [On]. 
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the Function Default menu. 
2 in 1 Layout
Select the default value for layout when [2 in 1] is sele cted for Combine. Items available for the default value are 
as follows: 
Use the procedure below to select  the default value for layout. 
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
EcoPrint:a  b 
*********************
2  On
1 *Off
Item Description
g    L to R  f   T to B Arranges from left  to right or top to bottom. 
e    R to L Arranges from right to left. 
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Function Default:
a  b 
*********************
2  Scan Resolution
3  FAX Resolution [ Exit ]
1  Color Selection
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-45
8
6Press the OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [2 in 1 Layout]. 
8Press the  OK key. 2 in 1 Layout appears. 
9Press the  U or  V key to select [ g   L to R  f   T to 
B] or [ e   R to L].  
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
4 in 1 Layout
Select the default value for layout when [4 in 1] is sele cted for Combine. Items available for the default value are 
as follows: 
Use the procedure below to select  the default value for layout. 
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
Detail Setting:a  b 
*********************
2  4 in 1 Layout
3  Border Line
[ Exit ]
1  2 in 1 layout
2 in 1 Layout
a  b 
*********************
2  e  R to L
1 *g  L to R f  T to B
Item Description
h    Right then Down Arranges from upper left to right.
i    Down then Right Arranges from upper left to bottom. 
j    Left then Down Arranges from upper right to left.
k    Down then Left Arranges from upper right to bottom.
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-46OPERATION GUIDE
2Press the OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
6Press the  OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [4 in 1 Layout]. 
8Press the  OK key. 4 in 1 Layout appears. 
9Press the  U or  V key to select [ h   Right then 
Down], [i    Down then Right], [ j   Left then Down] 
or [ k   Down then Left]. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Common Settings:a  b 
*********************
2  Default Screen
3  Sound
[ Exit ]
1  Language
Function Default:
a  b 
*********************
2  Scan Resolution
3  FAX Resolution [ Exit ]
1  Color Selection
Detail Setting:
a  b 
*********************
2  4 in 1 Layout
3  Border Line [ Exit ]
1  2 in 1 layout
4 in 1 Layout:
a  b 
*********************
2  i  Down then Right
3  j  Left then Down
1 *h  Right then Down
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-47
8
Border Line
Select the default value for border line when [2 in 1] is selected for Combine. Items available for the default value 
are as follows: 
Use the procedure below to select the default value for border line.
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
6Press the  OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [Border Line]. 
Item Description
None No border line.
l    Solid Line Draws  solid border lines.
m    Dotted Line Draws dotted border lines.
n    Positioning Mark Puts a mark on the border line position.
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Function Default:
a  b 
*********************
2  Scan Resolution
3  FAX Resolution [ Exit ]
1  Color Selection
Detail Setting:
a  b 
*********************
2  4 in 1 Layout
3  Border Line [ Exit ]
1  2 in 1 layout
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-48OPERATION GUIDE
8Press the OK key. Border Line appears. 
9Press the  U or  V key to select [  None], [ l   Solid 
Line], [ m   Dotted Line] or [ n   Positioning Mark]. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Orig. Binding
Select the default value for the binding edge of the orig inal when [2-sided>>1-sided] or [2-sided>>2-sided] is 
selected for Duplex. Items available for the default value are as follows: 
NOTE: This setting is shown only when the optional  document processor (DP-110) is installed. 
Use the procedure below to select the default  value for the binding edge of the original. 
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
Border Line:a  b 
*********************
2  l  Solid Line
3  m  Dotted Line
1 *   None
Item Description
o    Left/Right Left/right binding
p    Top Top binding
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-49
8
4Press the OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
6Press the  OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [Orig. Binding]. 
8Press the  OK key. Orig. Binding appears. 
9Press the  U or  V key to select [ o   Left/Right] or
 [  p   Top]. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Function Default:a  b 
*********************
2  Scan Resolution
3  FAX Resolution
[ Exit ]
1  Color Selection
Detail Setting:
a  b 
*********************
2  4 in 1 Layout
3  Border Line [ Exit ]
1  2 in 1 layout
Orig. Binding:
a  b 
*********************
2  p  Top
1 *o  Left/Right
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-50OPERATION GUIDE
Finish Binding
Select the default value for the binding edge of the finished copies when [1-sided>>2-sided] or [2-sided>>2-
sided] is selected for Duplex. Items ava
ilable for the default value are as follows: 
Use the procedure below to select the default va lue for the binding edge of the finished copies. 
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
6Press the  OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [Finish Binding]. 
Item
Description
o    Left/Right Left/right binding
p    Top Top binding
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Function Default:
a  b 
*********************
2  Scan Resolution
3  FAX Resolution [ Exit ]
1  Color Selection
Detail Setting:
a  b 
*********************
2  4 in 1 Layout
3  Border Line [ Exit ]
1  2 in 1 layout
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-51
8
8Press the OK key. Finish Binding appears. 
9Press the  U or V  key to select [  o   Left/Right] or [ p   
To p ] .   
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Image Quality
Select the default value for image quality when File Format  is selected. Select the default value in the range from 
[1 Low(High Comp)] (high compression) to [5 High(Low Comp)] (low compression). 
Use the procedure below to select th e default value for image quality. 
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
4Press the  OK key. The Function Default menu 
appears. 
5Press the  U or  V key to select [Detail Setting]. 
Finish.. Binding:a  b 
*********************
2  p  Top
1 *o  Left/Right
Sys. Menu/Count.:
a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Function Default:
a  b 
*********************
2  Scan Resolution
3  FAX Resolution [ Exit ]
1  Color Selection
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-52OPERATION GUIDE
6Press the OK key. The Detail Setting menu 
appears.
7Press the  U or  V key to select [Image Quality]. 
8Press the  OK key. Image Quality appears. 
9Press the  U or  V key to select from [1 Low(High 
Comp)] to [5 High(Low Comp)]. 
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Detail Setting menu.
Color TIFF Comp.
Set the default value for compression method for TIFF images handled by this machine. 
Use the procedure below to set the default  value for color TIFF compression method. 
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears. 
3Press the  U or  V key to select [Function Default]. 
Detail Setting:a  b 
*********************
2  4 in 1 Layout
3  Border Line
[ Exit ]
1  2 in 1 layout
Image Quality:
a  b 
*********************
2  2
3  3
1 *1 Low(High Comp)
Sys. Menu/Count.:
a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Downloaded From ManualsPrinter.com Manuals