Kyocera FS 1128MFP User Manual

							Default Setting (System Menu) 
OPERATION GUIDE8-3
8
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Language].
4Press the  OK key. The Language menu appears.
The available languages are as follows:
English
Deutsch
Français
Español
Italiano
Nederlands
Português
The optional languages are as follows:
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Language:
a  b 
*********************
2  Deutsch
3  Français
1 *English
Optional language Message display
Turkish Türkçe
Greek Ελληνικά
Polish Polski
Czech
Hungarian Magyar
Finnish Suomi
Hebrew
Arabic
Swedish Svensk
Danish Dansk
Norwegian Norsk
Romanian
Русский
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-4OPERATION GUIDE
If you are using one of the optional languages, it is 
displayed in place of Portugues.
5Press the 
U or  V key to select a language.
6Press the  OK key.  Completed.  is displayed and the 
screen returns to the Co mmon Settings menu.
Korean
Simplified Chinese
Traditional Chinese
Optional language Message display
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-5
8
Default Screen
Select the screen appearing right after start-up (default screen). The options are as follows.
The table below lists the available screens.
Use the procedure below to select the default startup screen.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Default Screen].
4Press the  OK key. Default Screen appears.
5Press the  U or  V key to select the default screen.
6Press the  OK key.  Completed.  is displayed and the 
screen returns to the Co mmon Settings menu.
Item
Description
Status The Status/Job Cancel screen (the screen shown 
when the  Status/Job Cancel  key is pressed) 
appears.
Copy The Copy screen (the screen shown when the 
Copy key is pressed) appears.
Send The Send screen (the screen shown when the 
Send key is pressed) appears. 
FAX The FAX screen (the screen shown when the 
FAX key is pressed) appears.
Document Box The Document Box screen (the screen shown  when the Document Box  key is pressed) 
appears.
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
1  Language
*********************
3  Sound [ Exit ]
2  Default Screen
Default Screen:
a  b 
1  Status
*********************
3  Send
2 *Copy
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-6OPERATION GUIDE
Sound
Set options for buzzer sound during the machine operations.
The table below lists the buzzer types and their settings and details. The asterisk in the table is a default setting. 
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Sound].
4Press the  OK key. Sound appears.
5Press the  U or  V key to select [Buzzer].
6Press the  OK key. Buzzer appears. 
7Press the U  or V key to select [Key Confirmation].
Item
Value Description
Key 
Confirmation  Off, On *
Emit a sound when the 
control panel are pressed.
Job Finish Off*, On Emit a sound when a print 
job is normally completed.
Ready Off*, On Emit a sound when the 
warm-up is completed.
Warning Off, On* Emit a sound when errors 
occur.
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
1  Language
2  Default Screen
*********************
[ Exit ]
3  Sound
Sound:
a  b 
*********************
2  FAX Speaker
3  FAX Monitor [ Exit ]
1  Buzzer
Buzzer:
a  b 
*********************
2  Job finish
3  Ready [ Exit ]
1  Key Confirmation
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-7
8
8Press the OK key. Key Confirmation appears.
9Press the  U or  V key to select [On] or [Off].
10Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Buzzer menu.
Display Bright.
Set the brightness of the display.
Use the procedure below to adjust the display brightness.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Display Bright.].
4Press the  OK key. Display Bright. appears.
5Press the  U or  V key to select the display 
brightness from [Darker  -3] to [Lighter +3].
6Press the OK key. Completed.  is displayed and the 
screen returns to the Co mmon Settings menu.
Key Confirmation:a  b 
*********************
2  On
1 *Off
Sys. Menu/Count.:
a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Display Bright.:a  b 
3  Darker -1
*********************
5  Lighter+1
4 *Normal  0
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-8OPERATION GUIDE
Original/Paper Settings
Register additional types and sizes of originals and paper. 
Custom Original Size Setup
Set up frequently-used custom original size. The dimensions available are as follows.
The table below lists the sizes that can be registered.
Use the procedure below to set a custom original size.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Orig./Paper Set.].
4Press the  OK key. The Orig./Paper Set. menu 
appears.
5Press the  U or  V key to select [Custom Orig.Size].
6Press the  OK key. Size En try(Y) appears.
7Use the numeric keys to enter the paper length (Y).
Input units
Dimensions
Inch models X: 1.97 to 14.02 (in 0.01 increments)  Y: 1.97 to 8.50 (in 0.01 increments) 
Metric models X: 50 to 356 mm (in 1 mm increments)  Y: 50 to 216 mm (in 1 mm increments) 
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Orig./Paper Set.:
a  b 
*********************
2  Def. Orig. Size
3  Custom PaperSize [ Exit ]
1  Custom Orig.Size
Size Entry(Y):
D  b 
(1.97 - 8.50)
 x ***7.00*
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-9
8
8Press the OK key. Size En try(X) appears.
9Use the numeric keys to enter the paper width (X).
10Press the OK key.  Completed.  is displayed and the 
screen returns to the Or ig./Paper Set. menu.
Size Entry(X): D  b 
(1.97 - 14.02)
  J **11.23*
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-10OPERATION GUIDE
Default Original Size Setup
In the screen for setting the paper size for the paper feed
 cassette or multi purpose tray, select the paper size 
to be used as the default value.
Use the procedure below to select the paper  size to be used as the default value.
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
3Press the  U or  V key to select [Orig./Paper Set.].
4Press the  OK key. The Orig./Paper Set. menu 
appears.
5Press the  U or  V key to select  [Def. Orig. Size].
6Press the OK key. Def. Orig. Size appears.
7Press the U  or V key to select the paper size to be 
used as the default value.
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Or ig./Paper Set. menu.
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Orig./Paper Set.:
a  b 
*********************
2  Def. Orig. Size
3  Custom PaperSize [ Exit ]
1  Custom Orig.Size
Def. Orig. Size:
a  b 
*********************
2  Legalq
3
  Statementq
1 *Letterq
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-11
8
Adding a Custom Size and Media Type for Paper to Print
Set up a frequently-used custom paper size. The custom size options are displayed on the screen to select 
paper.
The table below lists the sizes that can be registered.
Custom paper sizes can be added for each paper source.
Select media type for each paper size.
Media type: Plain, Transparency, Rough, Vellum, La bels, Recycled, Preprinted, Bond, Cardstock,Color, 
Prepunched, Letterhead, Thick, Enve lope, High Quality, Custom 1-8
NOTE: Refer to Paper Weight on page 8-17 for Custom 1-8 for media type.
Use the procedure below to select a  custom paper size and media type.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Common Settings].
2Press the  OK key. The Common Settings menu 
appears.
Input units
Dimensions
Inch models Cassette: X: 4.13 to 8.50 (in 0.01 increments)
Y: 5.83 to 14.02 (in 0.01 increments)
Paper Feeder PF-100: X: 5.83 to 8.50 (in 0.01 increments) Y: 8.27 to 14.02 (in 0.01 increments)
MP Tray: X: 2.75 to 8.50 (in 0.01 increments)
Y: 5.83 to 14.02 (in 0.01 increments)
Metric models Cassette: X: 105 to 216 (in 1 mm increments)
Y: 148 to 356 (in 1 mm increments)
Paper Feeder PF-100: X: 148 to 216 (in 1 mm increments) Y: 210 to 356 (in 1 mm increments)
MP Tray: X: 70 to 216 (in 1 mm increments)
Y: 148 to 356 (in 1 mm increments)
Sys. Menu/Count.:a  b 
4  User/Job Account
5  User Property
*********************
[ Exit ]
6  Common Settings
Common Settings:
a  b 
*********************
2  Default Screen
3  Sound [ Exit ]
1  Language
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-12OPERATION GUIDE
3Press the U or  V key to select [Orig./Paper Set.].
4Press the  OK key. The Orig./Paper Set. menu 
appears.
5Press the  U or  V key to select [Custom 
PaperSize].
6Press the  OK key. The Custom PaperSize menu 
appears. 
7Select the paper source in  which you want to set 
the custom size and press the  OK key. Size 
Entry(Y) appears.
8Use the numeric keys to enter the paper length (Y).
9Press the  OK key. Size En try(X) appears.
10Use the numeric keys to enter the paper width (X).
11Press the OK key. Mediatype appears. 
12Press the  U or  V key to select the media type for 
which you want to set the custom size.
13Press the  OK key.  Completed.  is displayed and the 
screen returns to the Or ig./Paper Set. menu.
Orig./Paper Set.:a  b 
*********************
2  Def. Orig. Size
3  Custom PaperSize
[ Exit ]
1  Custom Orig.Size
Custom PaperSize
a  b 
*********************
2  Cassette 2 Size
3  Cassette 3 Size
1  Cassette 1 Size
Size Entry(Y):
D  b 
    (5.83 - 14.02)
     x ***11.49*
Size Entry(X):D  b  
    (4.13 -  8.50)
     J ***6.00*
Media Type:a  b 
*********************
2  Transparency
3  Rough
1 *Plain
Downloaded From ManualsPrinter.com Manuals