Kyocera FS 1028DP User Manual

Chapter 7 Emulation
7-29
LQ Japan (284)LQ Norway (316)
Downloaded From ManualsPrinter.com Manuals 

Chapter 7 Emulation
7-30
LQ Denmark 2 (348)LQ Spain 2 (380)
Downloaded From ManualsPrinter.com Manuals 

Epson LQ-850 Emulation (Mode 5)
7-31
Latin America (412)LQ Denmark (156)
Downloaded From ManualsPrinter.com Manuals 

Chapter 7 Emulation
7-32
LQ Sweden (188)
Downloaded From ManualsPrinter.com Manuals 

HP LaserJet Emulation (Mode 6)
7-33
HP LaserJet Emulation (Mode 6) 
On shipment from the factory, the printing system is set to power up in the HP LaserJet 
(PCL 6) emulation. The Kyocera printing systems support to emulate the following HP 
printer language as tabled below:
The factory default symbol set is PC-8. To change this default symbol set, use the FRPO 
command with the U6 and U7 parameters. The default font is Courier. 
To set the printing system to power up in LaserJet mode, send the following...

Chapter 7 Emulation
7-34
The printing system also supports as many HP symbol sets as the LaserJet regularly sup-
ports and still other symbol sets can be provided in downloaded fonts. (A full list of the 
supported symbol sets appear in section LaserJet Symbol Sets on page 37.) These symbol 
sets can be used by appropriate font  selection commands as explained below. 
Fonts can be selected with PRESCRIBE commands, or through the printer driver pro-
vided with your software. The following font  sample was...

HP LaserJet Emulation (Mode 6)
7-35
The LaserJet emulation supports 600/1200 dpi raster graphics for printing system models 
with the 300/600/1200 dpi resolution support. There is also support of delta row com-
pression and compressed raster data for run length encoding and TIFF. 
The printing system supports the LaserJet vector graphics, which draw vertical or hori-
zontal ruled lines and create rectangles filled with a pattern or gray scale. 
The margins in this emulation differ from the  A parameters...

Chapter 7 Emulation
7-36
LDFC fonts or downloaded bitmap fonts by the user, they will constantly print unpre-
dictably if the printing system uses the resolution of 300 dpi. 
Font Priority 
On the printing systems with the 600/1200 dpi resolution support, font selection in the 
HP LaserJet format adds an additional step to the font prioritization format. In font selec-
tion, the printing system evalua tes the characteristics of the font and, by a process of 
matching features, reduces selection to a...

HP LaserJet Emulation (Mode 6)
7-37
LaserJet Font Escape Sequences 
The example below shows an HP font selection escape sequence that selects a LetterGot-
hic font with fixed-pitch, 12-cpi, 12-point, upright-style, normal stroke weight. 
To select this LetterGothic font, send the  following escape sequence to the printing sys-
tem: 
ESC(8U ESC(s0P ESC(s12H ESC(s12V ESC(s0S ESC(s0B ESC(s4102T 
Any escape sequence with two similar consecutive letters after the ESC parameter can be 
combined as in the...

Chapter 7 Emulation
7-38
Symbol Sets for Scalable Fonts 
The following table lists symbol set support for resident scalable fonts. To power up the 
printing system in one of these symbol set, use the following FRPO U6 and U7 values.
. Table 7.17.  Symbol Sets for Bitmap Fonts
Symbol Set HP Symbol Set ID (Value)  FRPO U6 Value FRPO U7 Value 
ISO 60 Norway 0D (4)450 
HP Extension 0E (5) 5
ISO 25 France 0F (6) 6
HP German 0G (7) 7
ISO 15 Italian 0I (9) 9
ISO 14 Japan 0K (11) 11
ECMA-94 Latin 1 0N (14) 14...