Kyocera FS 1028DP User Manual

IBM Proprinter X24E Emulation (Mode 1)
7-9
IBM Symbol Sets IBM PC-8 (341)IBM PC-8 (D/N) (373)
Downloaded From ManualsPrinter.com Manuals 

Chapter 7 Emulation
7-10
IBM PC-850 (405)IBM PC-860 (30)
Downloaded From ManualsPrinter.com Manuals 

IBM Proprinter X24E Emulation (Mode 1)
7-11
IBM PC-863 (62) IBM PC-865 (94)  
Downloaded From ManualsPrinter.com Manuals 

Chapter 7 Emulation
7-12
Diablo 630 Emulation (Mode 2) 
To set the power-up emulation for Diablo 630, send the printing system the following 
PRESCRIBE command sequence: !R! FRPO P1, 2; FRPO P3, 1; EXIT; 
The Diablo uses ten symbol sets as shown belo w. To select one of these symbol sets, use 
the INTL command or the operat or panel keys. Permanent setting of the symbol set is 
made with the FRPO U6 and U7 parameters.
The factory setting for the sy mbol set at power-up is IBM PC-8 for all emulation...

Diablo 630 Emulation (Mode 2)
7-13
Fonts can be selected by placing font commands in the file to be printed, or using SETF 
(set alternate font) and ALTF (change to alternate font) commands. To substitute scalable 
fonts for the embedded fonts using SETF  command, employ the FSET command to 
apply the appropriate font number for that scalable font. The default font mode (FTMD) 
is 0, so the printing system will not adjust  character spacing, line spacing, or page orien-
tation. 
The red/black ribbon...

Chapter 7 Emulation
7-14
Diablo 630 Control Codes 
Table 7.9.  Diablo 630 Control Codes  (Sheet 1 of 2)
Command FunctionCode (hex) Supported 
NUL Buffer code 00 Yes
ETX End of text 03 Yes
ACK Acknowledge 06 Yes
BEL Sound bell 07 –
BS Backspace 08 Yes
HT Horizontal tab 09 Yes
LF Line feed 0A Yes
VT Vertical tab 0B Yes
FF Form feed 0C Yes
CR Carriage return 0D Yes
SO Supplementary extended character set 0E –
SI Primary extended character set 0F –
DC1 XON 11 Yes
DC2 Enter printwheel table download mode 12...

Diablo 630 Emulation (Mode 2)
7-15
ESC 3Graphics mode ON 1B 33 Yes
ESC 4 Graphics mode OFF 1B 34 Yes
ESC 5 Forward printing mode 1B 35 Yes
ESC 6 Backward printing mode 1B 36 Yes
ESC 7 Print suppression 1B 37 –
ESC 8 Clear horizontal tab at current position 1B 38 Yes
ESC 9 Set left margin at current position 1B 39 Yes
ESC < Reverse printing mode ON 1B 3C –
ESC > Reverse printing mode OFF 1B 3E –
ESC = Auto-center 1B 3D –
ESC ? Auto carriage return ON 1B 3F Yes
ESC ! Auto carriage return OFF 1B 21 Yes
ESC...

Chapter 7 Emulation
7-16
Diablo 630 Symbol Sets DIABLO US (29)Diablo France (61)   
Downloaded From ManualsPrinter.com Manuals 

Diablo 630 Emulation (Mode 2)
7-17
Diablo Germany (93)Diablo U. K. (125)
Downloaded From ManualsPrinter.com Manuals 

Chapter 7 Emulation
7-18
Diablo Denmark (157)Diablo Sweden (189)
Downloaded From ManualsPrinter.com Manuals