Kyocera FS 1028DP User Manual

 Chapter 6
Permanent Parameters
The printing system maintains a number of parameters in a non-volatile (flash) memory. 
These parameters control the initial state of  the environment at power-up, including the 
initial emulation mode, page orientation, ch aracter set, buffer allocations in memory, 
interface parameters, and other options. 
The parameters may be changed permanently  with the FRPO (Firmware RePrOgram) 
command. Some FRPO parameters affect  only the current interface (interface-depen-
dent)...

Chapter 6 Permanent Parameters
6-2
FRPO Parameters 
The FRPO command changes the value of one parameter in permanent memory. A 
separate command is required for each pa rameter change. The parameters, their 
meanings, and the specifiable  values are listed below. 
In these tables, the Interface-dependent parameters  affect the environment on the current 
interface only. Any changes made to the pa rameters on one interface will not change 
parameters on the other interfaces. To change a similar parameter...

6-3
KC-GL pen widthaG1 through G8 0  to  99  dot01/02/03/04/
05/06/07/08
Interface release time-
out J2
0 to 99 in units of 5 seconds 6
KC-GL enlarge mode
aJ9 0: Off 0
1: A2
2: A1
3: A0
4: B3
5: B2
6: B1
7: B0
Duplex mode  N4 0:  Simplex mode 0
1: Long-edge binding
2: Short-edge binding
Default emulation 
mode P1
0: Line Printer 6
1:  IBM Proprinter X24E
2: Diablo 630
5: Epson LQ-850
6: HP LaserJet
8: KC-GL
9: KPDL
Carriage-return action P2 0:  Ignores 0x0d 1 
1: Carriage-return
2:...

Chapter 6 Permanent Parameters
6-4
Character spacingaU3  Characters per inch (fraction value)0
Country code  U6 0:  US-ASCII 0
1: France
2: Germany
3: UK
4: Denmark
5: Sweden
6: Italy
7: Spain
8: Japan
9: US Legal
10:  IBM PC-850 (Multilingual)
11:  IBM PC-860 (Portuguese)
12:  IBM PC-863 (Canadian French)
13:  IBM PC-865 (Norwegian)
14: Norway
15: Denmark 2
16: Spain 2
17: Latin America
50 – 99:HP PCL symbol set coding (See page 7- 37.)
Code set at power up in 
daisywheel emulation U7
0:  Same as the...

6-5
Interface-independent Parameters
Table 6.2.  Interface-independent Parameters (Sheet 1 of 7)
EnvironmentParameter Value Factory setting 
Downloadable PCL font 
compression B0 0:  Off
0 (countries excluding 
Asia) or 1 (Asia)
1: On
Message language 
selection at power-on B7 0: Automatically en
ters message language 
selection menu at the initial power-on. After 
a language is selected, B7=1 is set 
automatically. 1
1:  Does not automatically enter message  language selection menu at power-on.
Default...

Chapter 6 Permanent Parameters
6-6
4: ETX/ACK
5:  XON/XOFF recognized only as protocol
Buffer nearly-full 
threshold H6  Percentage of the received data buffer size. 90
Buffer nearly-empty 
threshold H7  Percentage of the received data buffer size. 70
Total host buffer size H8 0 to 99 in units of the size defined by FRPO S5 5 (monochrome  model), 10 
(monochrome model 
with network 
Interface), or 12 (color 
model)
Form feed time-out 
value H9 Value in units of 
5 seconds (0 to 99). 6
Memory card...

6-7
Ecoprint level N6 0:  Off0
2: On
Duplex N7 0: Normal 0
1:  Reverse output pages.
2:  Allows duplex from the MP tray.
3: Allows duplex from the MP tray; reversing  the output pages.
Printing resolutio n N8 0: 300 dpi 1
1: 600 dpi
3: 1200 dpi
PCL resource protection  N9 0: Off 0
1: Protects permanent PCL resources and  resets the environment.
2: Protects permanent and temporary PCL  resources.
Parallel interface mode  O0 0: Normal 5
1: High-speed
5: Nibble (High)
70: Auto (Negotiation)
Command...

Chapter 6 Permanent Parameters
6-8
23: Main cassette, the first feeder cassette, the third feeder cassette, an d the fourth feeder 
cassette.
24: Main cassette, the second feeder cassette,  the third feeder cassette, and the fourth 
feeder cassette.
25: The first feeder cassette, the second feeder  cassette, the third feeder cassette, and the 
fourth feeder cassette.
26: Main cassette, the first feeder cassette, the  second feeder cassette, the third feeder 
cassette, and the fourth feeder cassette.
99:...

6-9
Daisywheel data length R8 7: 7-bit7
8: 8-bit
Default envelope feeder 
paper size R9 Same as the R2 values except below
0
0: A4 or Letter
A4/letter equation S4 0: Off 0
1: On
Host buffer size S5 0: 10kB (x H8) 1
1: 100kB (x H8)
2: 1024kB (x H8)
RAM disk capacity S6 0 to 1024 (MB) 50
RAM disk S7 0: Disabled 0
1: Enabled
Serial interface mode S9 0:  Normal 0
1: Barcode reader
MP tray mode T0 0: Cassette mode 1
1: First mode (overrides other paper sources)
Cassette 1 paper size
gT1 6: Letter 6 (U.S.A) or...

Chapter 6 Permanent Parameters
6-10
8: Rough
9: Letterhead
10: Color
11: Prepunched
12: Envelope
13: Cardstock
21: Custom1
22: Custom2
23: Custom3
24: Custom4
25: Custom5
26: Custom6
27: Custom7
28: Custom8
Paper type for paper 
cassettes 1 to 6  X1 – X6 1:  Plain
1
3: Preprinted
5: Bond
6: Recycled
8: Rough
9: Letterhead
10: Color
11: Prepunched
21: Custom1
22: Custom2
23: Custom3
24: Custom4
25: Custom5
26: Custom6
27: Custom7
28: Custom8
Paper type for 
Envelope Feeder/
Universal Feeder X7 1: Plain
1...