Konica Minolta magicolor 1690MF User Manual

Configuration Menu Overview 2-34
DNS CONFIG.SettingDISABLE / ENABLE
Set whether or not the DNS server set-
ting is to be specified.
If 
ENABLE is selected, specify DNS 
server addresses (up to three 
addresses).
DHCPSettingDISABLE / ENABLE
If there is a DHCP server on the net-
work, specify whether the IP address 
and other network information is auto-
matically assigned by the DHCP server.
BOOTPSettingDISABLE / ENABLE
If there is a BOOTP server on the net-
work, specify whether the IP address 
and other...

Configuration Menu Overview2-35
SNMPSettingDISABLE / ENABLE
Select whether or not to enable SNMP.
SPEED/DUPLEXSettingAUTO / 10BASE-T FULL 
/ 
10BASE-T HALF / 
100BASE-TX FULL / 
100BASE-TX HALF
Specifies the transmission speed for the 
network and the transmission method 
for bi-directional transmission. 
E-MAIL 
SETTINGSMTPSettingDISABLE / ENABLE
Select whether to enable or disable 
e-mail transmission operations for this 
machine.
SENDER NAMESpecify the name of the E-mail sender 
(up to 20 characters)...

Configuration Menu Overview 2-36
SMTP TIMEOUTSetting30 to 300 sec (Default: 
60 sec)
Select the amount of time (in seconds) 
until the connection with the SMTP 
server times out.
TEXT INSERTSettingOFF / ON
Select whether or not the specified text 
is inserted into the E-mail message.
POP 
BEFORE 
SMTPDIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable POP 
Before SMTP.
If 
ENABLE is selected, specify the time 
(between 0 and 60 seconds). The 
default setting is 5sec.
POP3 
SERVER...

Configuration Menu Overview2-37
SMTP 
AUTH.DIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable SMTP 
authentication.
SMTP 
USER-
NAMESpecify the user name (up to 63 charac-
ters) used for SMTP authentication.
The default setting is blank.
SMTP 
PASS-
WORDSpecify the password (up to 15 charac-
ters) used for SMTP authentication.
The default setting is blank.
LDAP 
SETTINGDISABLE/ENABLESettingDISABLE / ENABLE
Select whether or not to enable the 
LDAP function.
LDAP SERVER 
ADDR.Specify...

Configuration Menu Overview 2-38
MAX.SEARCH 
RESULTSSetting5 to 100 (Default: 100)
Specify the maximum number of desti-
nations displayed after a search.
AUTHENTICATIONSettingANONYMOUS / SIMPLE / 
DIGEST-MD5 / 
GSS-SPNEGO
Select the authentication method used 
for logging on to the LDAP server.
LDAP ACCOUNTSpecify the account (up to 64 charac-
ters) used to connect to the LDAP 
server.
The default setting is blank.
LDAP PASSWORDSpecify the password (up to 32 charac-
ters) used to connect to the LDAP...

Configuration Menu Overview2-39
LINE MONITORSettingOFF / LOW / HIGH
Select the volume of the monitoring 
sound of the transmission signal.
PSTN/PBXSettingPSTN / PBX
Select whether the connected tele-
phone wiring is a public switched tele-
phone network (PSTN) or a private 
branch exchange (PBX).
For a PBX system, the prefix number 
(outside line access number or exten-
sion number) can be specified.
USER 
SETTINGPTT SETTINGSettingARGENTINA / AUSTRA-
LIA
 / AUSTRIA / BEL-
GIUM
 / BRAZIL / 
CANADA / CHINA...

Configuration Menu Overview 2-40
DATE&TIMESettingTIME: 00:00-23:59
(Default: 
00:00)
DATE: ’00/01/01-’99/12/31
ZONE: 
GMT+12:00-GMT-12:00 (in 
30-minute intervals)
(Default: 
GMT+00:00)
Use the keypad to specify the current 
date, time and time zone.
DATE FORMATSettingMM/DD/YY, DD/MM/YY, 
YY/MM/DD
Select the display format for reports and 
lists.
PRESET ZOOMSettingINCH / METRIC
Select the measurement units for the 
preset zoom ratios.
The default setting is 
INCH for USA 
and Canada, and 
METRIC for...

Configuration Menu Overview2-41
INTERVALSetting2 to 99 min (Default: 
depends on 
PTT SET-
TING
)
Specify the interval between redial 
attempts.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 2-42
COPY SETTING Menu
*1 This appears only when the duplex option has been installed.
Manufacturer’s default settings appear in bold.
COPY SETTING PAPER PRIORITY
QUALITY PRIORITY
DENSITY PRIORITY
DENSITY LEVEL AUTO
MANUAL
OUTPUT PRIORITY
DUPLEX COPY
*1
PAPER PRIOR-
ITYSettingTRAY1 / TRAY2
Specify the paper tray that is normally used.
If an optional lower feeder unit is not installed, 
this setting is not available.
QUALITY PRI-
ORITYSettingMIX , TEXT , PHOTO , FINE/MIX ,...

Configuration Menu Overview2-43
DEN-
SITY 
LEVELAUTOSetting
(LIGHT) (DARK)
Adjust the density of the background color.
MANUALSetting
(LIGHT) (DARK)
Specify the default copy density.
OUTPUT PRIOR-
ITYSettingNON-SORT / SORT
Select whether or not to sort copies by sets.
DUPLEX COPYSettingOFF / LONG EDGE / SHORT EDGE
Select the default setting for duplex (double-sided) 
copying.
If 
OFF is selected, duplex (double-sided) copying is 
not performed as a default.
If 
LONG EDGE is selected, duplex (double-sided)...