Konica Minolta bizhub C550 User Manual

Specifying Utility mode parameters7
C5507-34
7.9 HDD Setting
Various hard disk operations are available, such as those for erasing data 
from the hard disk and for checking the amount of free space on the hard 
disk. Settings can be specified for the following.
!
Detail 
The following data is erased when the hard disk is formatted.
Program destinations
Address book destinations
Authentication method settings
User authentication settings
Account track settings
User boxes
User box settings
Documents in...

Specifying Utility mode parameters7
C5507-35 Check HDD Capacity
The amount of space on the hard disk can be checked.
1Touch [Security Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to 
“Displaying the Administrator Settings screen” on page 7-4.
2Touch [6 HDD Setting] in the Security Setting screen.
3Touch [1 Check HDD Capacity] in the HDD Setting screen.
The Check HDD Capacity screen appears.
4Touch [Close].
– To cancel changes to the...

Specifying Utility mode parameters7
C5507-36 Overwrite Temporary Data
The setting for overwriting data on the hard disk can be specified. (The de-
fault setting is “Mode 1”.)
This machine destroys data by overwriting all data in the entire area where 
an image was stored when that image data on the hard disk is considered 
unnecessary. In addition, destroying the structure of data other than image 
data prevents the disclosure of the data in case the hard disk is stolen.
2
Reminder 
When the setting for...

Specifying Utility mode parameters7
C5507-37 – When the security kit is not installed:
– When the security kit is installed:
The Overwrite Temporary Data screen appears.
4To overwrite the data, touch [Yes], and then select the overwriting 
method.
– If the security kit is installed, touch [Encryption Priority] or [Over-
write Priority].
5Touch [OK].
– If “Encryption Priority” and “Overwrite Priority” was changed, con-
tinue with step 6.
The mode for overwriting temporary data is specified.
Downloaded...

Specifying Utility mode parameters7
C5507-38
6If a message appears, asking whether to reformat the hard disk, touch 
[Yes].
– To cancel changes to the settings, touch [No].
7Follow the instructions in the screen to restart the machine.
8If an error message appears, indicating that the encryption key does 
not match, the Administrator Settings screen appears. In this screen, 
touch [Format HDD].
– To cancel changes to the settings, touch the menu item name in the 
Bookmark screen to return to the selected...

Specifying Utility mode parameters7
C5507-39
2
Reminder 
When the machine is turned off, then on again with the main power 
switch, wait at least 10 seconds to turn on the machine after turning it off; 
otherwise, the machine may not function correctly.
In order to enable the setting specified in the Overwrite Temporary Data 
screen, “Overwrite Temporary Data” must be set to “Yes”.
Overwrite All Data
The machine can be set to overwrite all data on the hard disk.
The methods for overwriting data are...

Specifying Utility mode parameters7
C5507-40 – For details on displaying the Administrator Settings screen, refer to 
“Displaying the Administrator Settings screen” on page 7-4.
2Touch [6 HDD Setting] in the Security Setting screen.
3Touch [3 Overwrite All Data] in the HDD Setting screen.
The Overwrite All Data screen appears.
4Select the desired method for overwriting data on the hard disk, and 
then touch [Overwrite].
A confirmation message appears, asking whether or not to overwrite 
the data.
5To...

Specifying Utility mode parameters7
C5507-41
6Follow the instructions in the screen to restart the machine.
– To cancel changes to the settings, touch the menu item name in the 
Bookmark screen to return to the selected screen without applying 
the changes to the settings.
– To finish specifying settings in the Utility mode, press the [Utility/
Counter] key. Otherwise, exit the Utility mode by touching [Close] in 
each screen until the screen for the Copy, Fax/Scan or User Box 
mode appears.
All data on...

Specifying Utility mode parameters7
C5507-42
1Touch [Security Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to 
“Displaying the Administrator Settings screen” on page 7-4.
2Touch [6 HDD Setting] in the Security Setting screen.
3Touch [4 HDD Lock Password] in the HDD Setting screen.
The HDD Lock Password screen appears. From this screen, the pass-
word can be changed or the hard disk locking password can be can-
celed.
4Type in the...

Specifying Utility mode parameters7
C5507-43
5Type the password specified in step 4, and then touch [OK].
The message “Turn the main switch OFF and ON.” appears.
6Follow the instructions in the screen to restart the machine.
– To cancel changes to the settings, touch the menu item name in the 
Bookmark screen to return to the selected screen without applying 
the changes to the settings.
– To finish specifying settings in the Utility mode, press the [Utility/
Counter] key. Otherwise, exit the Utility...