Konica Minolta bizhub C451 User Manual

Printing a user box document4
C4514-6
4.2 Printing
Available print settings
Settings can be specified for the following when a document is printed.
!
Detail 
The Fold/Bind settings are available only if optional finisher FS-608 is in-
stalled.
The Center Staple/Fold settings are available only if optional finisher FS-
519 is installed.
The Punch settings are available only if the punch kit is installed on the 
optional finisher.
For details on combining multiple documents and printing, refer to “Com-...

Printing a user box document4
C4514-7 To print a document
1From the Use Document screen, select the document to be printed.
2Under “Action”, touch [Print].
3Select the print settings.
Downloaded From ManualsPrinter.com Manuals 

Printing a user box document4
C4514-8
4If desired, touch [Preview], then [Details] on the left side of the screen 
to check a preview image.
– For details on the Preview screen, refer to “Preview - Detail (Print/
Combine)” on page 2-78.
5Touch [Start], or press the [Start] key in the control panel.
!
Detail 
For details on changing the settings, refer to the descriptions starting with 
page 4-8.
Changing the number of copies
Specify the number of copies to be printed.
%In the Print screen, use the keypad...

Printing a user box document4
C4514-9 Specifying single-sided/double-sided printing
Select whether a single-sided or double-sided copy of the document is to be 
printed.
%Touch [1-Sided] or [2-Sided].
Specifying Finishing settings
Specify settings for collating, grouping, stapling, hole punching, folding/
binding or center stapling/folding. Settings can be specified for the following.
ParameterDescription
Sort Select this setting to feed out copies of the document by sets.
Group Select this setting to...

Printing a user box document4
C4514-10
!
Detail 
The feeding method when a finisher is installed can be changed from Ad-
ministrator mode. For details on the Finishing settings, refer to the User’s 
Guide [Copy Operations].
When a Fold/Bind or a Center Staple/Fold setting is selected, “Sort” is 
automatically selected, and the “Group”, Offset, Staple and Punch set-
tings are canceled.
2
Reminder 
In order to select a Fold/Bind or a Center Staple/Fold setting, all of the 
following conditions must be...

Printing a user box document4
C4514-11
1In the Print screen, touch [Finishing].
2Touch [Sort] or [Group]. To separate the copies, touch [Yes] under “Off-
set”.
– On the North American (inch) model:
– On the European (metric) model:
Downloaded From ManualsPrinter.com Manuals 

Printing a user box document4
C4514-12
3Select the desired Staple and Punch settings.
– On the North American (inch) model:
– On the European (metric) model:
4To specify the positions of the staples and punched holes, touch [Po-
sition Setting].
5Touch the button for the desired position, and then touch [OK].
– When the “Corner” Staple setting is selected:
Downloaded From ManualsPrinter.com Manuals 

Printing a user box document4
C4514-13 – When the “2 Position” Staple setting is selected:
– When a Punch setting is selected:
– On the North American (inch) model:
– On the European (metric) model:
6If finisher FS-608 is installed, touch [Fold/Bind]. If finisher FS-519 is in-
stalled, touch [Center Staple/Fold].
Downloaded From ManualsPrinter.com Manuals 

Printing a user box document4
C4514-14
7If [Fold/Bind] was touched, touch [Yes], and then select the desired 
folding method.
8If [Center Staple/Fold] was touched, touch [Yes], and then select the 
desired folding method.
Downloaded From ManualsPrinter.com Manuals 

Printing a user box document4
C4514-15 – To adjust the position of the center stapling and center fold, touch 
[Position Adjustment], and then specify an adjustment between -10 
and +10.
9Touch [OK], and then touch [OK] in the next screen that appears.
Adding a binding margin
A binding margin can be added to the left or right side or to the top of the 
printed pages. Settings can be specified for the following.
ParameterDescription
Margin Position Select the location where the binding margin is to be...