Konica Minolta bizhub C35P User Manual

Configuration Menu Overview
4-58
AUTO 
CON-
TINUESettingsON/ OFF
Select whether or not printing continues if the size or type of 
media in the selected tray is diff erent from the size or type of 
media for the print job.
If 
AUTO CONTINUE is set to ON, printing automat ically contin-
ues after about 10 seconds under the following conditions. At 
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (page 9-42)/TRAY EMPTY (page 
9-43)
Different media...

Configuration Menu Overview4-59
SECU-
RITYCHANGE 
PASS-
WORDSpecify the password for locking the control panel.
If the password is set to 
0000 (default), the control 
panel is not locked. In order to lock the control panel, 
be sure to specify a password other than 
0000.
LOCK 
PANELSettingsOFF/MINIMUM/ON
Specify how the control panel is locked.
If 
OFF is selected, the control panel is not locked.
If 
MINIMUM is selected, the INTERFACE MENU 
and SYS DEFAULT MENU are protected with a 
password.
If 
ON...

Configuration Menu Overview 4-60
RESTORE 
DEFAULTSRESTORE 
NETWORKReset the network settings to their defaults. When 
this menu item is selected, the printer is 
automatically restarted.
RESTORE 
PRINTERReset the printer settings to their defaults. When this 
menu item is selected, the printer is automatically 
restarted.
RESTORE 
ALLReset all settings to their defaults. When this menu 
item is selected, the printer is automatically restarted.
ENABLE 
WARNINGPAPER 
EMPTYTRAY1SettingsON/OFF
Select whether...

Configuration Menu Overview4-61 MAINTENANCE MENU
With this menu, maintenance on this printer can be performed.
In order to use this menu, the administrator password must be entered.
ALIGNMENTTOP 
ADJUSTMENTPLAIN PAPER
THICK
TRANSFER 
POWERSIMPLEX PASS
MAINTENANCE MENU
PRINT MENUEVENT LOG
HALFTONE 64CYAN 64/MAGENTA 64/
YELLOW 64/BLACK 64
CYAN 128/MAGENTA 128/
YELLOW 128/BLACK 128
CYAN 256/MAGENTA 256/
YELLOW 256/BLACK 256
HALFTONE 128
HALFTONE 256
GRADATION
THICK 2
ENVELOPE
LEFT 
ADJUSTMENTLEFT ADJ 
TRAY...

Configuration Menu Overview 4-62
IMG ADJ
THICKCYAN
MAGENTA
YELLOW
BLACK
THICK 1
POSTCARD
THICK 2
IMG ADJ
BLACK
LABEL
GLOSSY 1
GLOSSY 2
MANUAL 
DUPLEXPLAIN PAPER
LABEL
GLOSSY 2
GLOSSY 1
ENVELOPE
ENGINE DIPSWENGINE DIPSW 
1-28
FINE LINE 
ADJ
AIDC MODE
THICK MODE
ENVELOPE
MAIN SCAN 
ADJUSTMAIN SCAN 
PAGE
YELLOW
MAGENTA
CYAN
SCAN ADJUST 
VALUE
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview4-63
* This menu item appears when a USB memory device is plugged into 
the USB memory port.
SUPPLIESREPLACETRANS. BELT
TRANS. 
ROLLER
FUSER UNIT
QUICK SET-
TING*UPDATE SET-
TING
BACKUP SET-
TING
BACKUP TYPE
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 4-64
All factory default values are shown in bold.
PRINT 
MENUEVENT 
LOGSettingsPRINT/CANCEL
Prints the event log.
HALF-
TONE 
64CYAN 
64/
MAGENTA 
64/YEL-
LOW 
64/
BLACK 
64
SettingsPRINT/CANCEL
Prints the halftone pattern using a 25% 
density for each CMYK color.
HALF-
TONE 
128CYAN 
128/
MAGENTA 
128/
YELLOW 
128/
BLACK 
128
SettingsPRINT/CANCEL
Prints the halftone pattern using a 50% 
density for each CMYK color.
HALF-
TONE 
256CYAN 
256/
MAGENTA 
256/
YELLOW 
256/
BLACK...

Configuration Menu Overview4-65
THICKSettings-15-15
Adjusts the top margin of thick paper for 
simplex (single-sided) printing.
THICK 2Settings-15-15
Adjusts the top margin of thick 2 paper 
for simplex (single-sided) printing.
ENVE-
LOPESettings-15-15
Adjusts the top margin of envelopes for 
simplex (single-sided) printing.
LEFT 
ADJUST
MENTLEFT 
ADJ 
TRAY1Settings-15-15
Adjusts the left margin of media fed from 
Tray 1 for simplex (single-sided) printing.
LEFT 
ADJ 
TRAY2Settings-15-15
Adjusts the left...

Configuration Menu Overview 4-66
THICK 
1Settings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for simplex 
(single-sided) printing of thick 
1 paper.
THICK 
2Settings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for simplex 
(single-sided) printing of thick 
2 paper.
POST-
CARDSettings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for simplex 
(single-sided) printing of post-
cards.
ENVELOPESettings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for simplex 
(single-sided) printing of...

Configuration Menu Overview4-67
MANUAL 
DUPLEXPLAIN 
PAPERSettings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for duplex 
(double-sided) printing of plain 
paper.
THICK 
1Settings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for duplex 
(double-sided) printing of thick 
1 paper.
THICK 
2Settings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for duplex 
(double-sided) printing of thick 
2 paper.
POST-
CARDSettings-8-7
Adjusts the 2nd image transfer 
output (ATVC) for duplex 
(double-sided)...